Wraps by car

IM IM5 wrap

The IM IM5 wrap is a color change or protection film for a mid-size electric liftback. This catalog shows one generation, the first, in production from 2025 to now. A full wrap of the 194.1 in (4,931 mm) body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. A vinyl wrap changes the color or finish of the IM5 without repainting it.

1generations15 mof film for a full wrap

IM IM5, first generation, factory photo
IM IM5, first generation. Factory color shown.

IM IM5 wrap colors and ideas

  • IM IM5 black wrap
  • IM IM5 white wrap
  • IM IM5 gray wrap
  • IM IM5 silver wrap
  • IM IM5 red wrap
  • IM IM5 blue wrap
  • IM IM5 green wrap
  • IM IM5 yellow wrap
  • IM IM5 orange wrap
  • IM IM5 purple wrap
  • IM IM5 pink wrap
  • IM IM5 teal wrap
  • IM IM5 brown wrap
  • IM IM5 gold wrap
  • IM IM5 chrome wrap
  • IM IM5 color shift wrap
  • IM IM5 carbon fiber wrap
  • IM IM5 camo and patterned wrap

How much vinyl to wrap an IM IM5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowliftback (4 doors)194.1 in (4,931 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

IM IM5 wrap cost factors

The IM IM5 wrap cost depends on the size of the car and the choice of film. A wrap of the 194.1 in (4,931 mm) liftback takes about 49 ft (15 m) of material. Chrome or patterned film adds waste, so the estimate rises to about 62 ft (19 m). The glass roof is not wrapped, but the charge port door and sensors add labor.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: liftback (4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

IM IM5 wraps by generation

Swipe sideways. Tap a card for the full description.

IM IM5, first generation, factory photo
Factory color shown

2025–now IM IM5 liftback (first generation)

2025–nowliftback (4 doors)194.1 in (4,931 mm)

The first generation IM IM5 has a panoramic glass roof on every trim. The roof stays dark whatever the color of the film because glass is not wrapped. The film ends at the roof rails along the sides. This leaves the main roof area exposed and reduces the amount of film used on the top.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an IM IM5

An IM IM5 partial wrap can cover the hood, mirror caps, or tailgate with film. Chrome delete on this car covers the window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end. These smaller jobs use less material than a full wrap of the liftback.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an IM IM5: body, cut-outs and film

The IM IM5 vinyl wrap covers a single body style, a liftback with four doors. The car is 194.1 in (4,931 mm) long, so a full wrap uses about 49 ft (15 m) of film. Every trim has a panoramic glass roof, and the glass stays unwrapped. The film ends at the roof rails, leaving a smaller painted area than a typical sedan.

IM IM5 wrap ideas start with the parts that need extra cut-outs. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. The body cameras also need the film trimmed around each lens. The charge port door is wrapped as a small piece of its own.

How much vinyl to wrap an IM IM5 stays the same for the whole first generation. There is one body in the catalog, produced from 2025 to now. The film estimate for this liftback is about 49 ft (15 m) of 60-inch (1.52 m) cast film. No earlier or later generation changes that figure.

Questions about wrapping an IM IM5

How much vinyl does it take to wrap an IM IM5?

Yes, it takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap an IM IM5. That estimate is for the first generation liftback, which is 194.1 in (4,931 mm) long. The glass roof is not wrapped, which keeps the film use at this figure. Chrome or patterned film would need more material, about 62 ft (19 m).

Can the roof of an IM IM5 be wrapped?

No, the roof of an IM IM5 cannot be wrapped because it is made of glass. Every trim has a panoramic glass roof, and the film ends at the roof rails. The glass stays its own dark color and is not covered with vinyl. Only the metal or painted borders around the glass could take film.

Can I wrap only the hood or the roof of an IM IM5?

Yes, an IM IM5 can have only the hood or the tailgate done as a partial wrap. The hood and tailgate are listed as areas for a partial wrap on this car. The roof is not an option because it is a glass panel. Mirror caps are also available as a small partial wrap job.

Is an IM IM5 hard to wrap?

An IM IM5 is not hard to wrap, but it has several details that add work. The body is 194.1 in (4,931 mm) long, so a full wrap uses about 49 ft (15 m) of film. Every trim has parking sensors and cameras that need the film cut around each one. The charge port door is wrapped as a small piece of its own.