Wraps by car

IM LS7 wrap

The IM LS7 wrap page covers the first generation SUV built from 2022 to now. A full vinyl wrap of this car takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. This page explains the panel layout, wrap options, and how much film the job requires.

1generations20.5 mof film for a full wrap

IM LS7, first generation, factory photo
IM LS7, first generation. Factory color shown.

IM LS7 wrap colors and ideas

  • IM LS7 black wrap
  • IM LS7 white wrap
  • IM LS7 gray wrap
  • IM LS7 silver wrap
  • IM LS7 red wrap
  • IM LS7 blue wrap
  • IM LS7 green wrap
  • IM LS7 yellow wrap
  • IM LS7 orange wrap
  • IM LS7 purple wrap
  • IM LS7 pink wrap
  • IM LS7 teal wrap
  • IM LS7 brown wrap
  • IM LS7 gold wrap
  • IM LS7 chrome wrap
  • IM LS7 color shift wrap
  • IM LS7 carbon fiber wrap
  • IM LS7 camo and patterned wrap

How much vinyl to wrap an IM LS7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)198.8 in (5,049 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

IM LS7 wrap cost factors

IM LS7 wrap cost depends mainly on the size of the car and the film type, since a full wrap of this SUV needs about 67 ft (20.5 m) of cast film. Chrome or patterned film raises the amount to about 79 ft (24 m), which adds material and labor. The number of panels, including the large tailgate and the separate charge port door, also affects the time an installer spends on the job.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

IM LS7 wraps by generation

Swipe sideways. Tap a card for the full description.

IM LS7, first generation, factory photo
Factory color shown

2022–now IM LS7 SUV (first generation)

2022–nowSUV (5 doors)198.8 in (5,049 mm)

The first generation IM LS7 is an SUV with five doors and a length of 198.8 in (5,049 mm). This size means a full wrap uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, or about 79 ft (24 m) for chrome or patterned film. The body has a tailgate with the rear glass in it, so the film ends at the edge of the glass, and the charge port door is wrapped as its own small piece.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on an IM LS7

Partial wrap on an IM LS7 can cover just the roof, hood, or mirror caps for a smaller color change. Chrome delete is another option that covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an IM LS7: body, cut-outs and film

An IM LS7 vinyl wrap covers a five-door SUV with an overall length of 198.8 in (5,049 mm). The tall sides and long roof add surface area, so the film estimate includes extra material for the rear hatch and pillars. The body style has no separate trunk, so the tailgate is wrapped as one large panel with the rear glass left uncovered.

IM LS7 wrap ideas start with the tailgate, where the rear glass sits inside the panel and the film ends at the edge of the glass. The charge port door is wrapped as a small separate piece because this is an electric car. For a clean finish, the installer removes badges and any trim that can be taken off before the film goes on.

How much vinyl to wrap an IM LS7 depends on the film type you choose, because this page lists two estimates. A standard color change uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 79 ft (24 m). The difference comes from the extra material required to match patterns or stretch chrome film around the SUV body.

Questions about wrapping an IM LS7

How much vinyl does it take to wrap an IM LS7?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap an IM LS7. If you choose chrome or patterned film, the amount is about 79 ft (24 m). These figures come from the estimate for the newest body of this car.

Can I wrap only the hood or the roof of an IM LS7?

Yes, you can wrap only the hood or the roof of an IM LS7 as a partial wrap. Other options include mirror caps, chrome delete on the window trim and badges, or paint protection film (PPF) on the front end. These smaller jobs use less film than a full wrap.

Is an IM LS7 hard to wrap?

The IM LS7 is not the easiest car to wrap because of its size and a few specific parts. The tailgate has the rear glass in it, so the film must end exactly at the edge of the glass. The charge port door is wrapped as a small separate piece, which adds an extra step compared to a non-electric car.

How many generations of the IM LS7 does this page cover?

This page covers one generation of the IM LS7, the first generation produced from 2022 to now. All the film estimates and panel notes refer to that body style.