Wraps by car

Jensen Interceptor wrap

The Jensen Interceptor wrap is a color change for a British sports car made from 1966 to 1976. One generation is in the catalog. A full wrap of the newest body takes about 49 ft (15 m) for the convertible to 52 ft (16 m) for the hatchback, using 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Jensen Interceptor, first generation, factory photo
Jensen Interceptor, first generation. Factory color shown.

Jensen Interceptor wrap colors and ideas

  • Interceptor black wrap
  • Interceptor white wrap
  • Interceptor gray wrap
  • Interceptor silver wrap
  • Interceptor red wrap
  • Interceptor blue wrap
  • Interceptor green wrap
  • Interceptor yellow wrap
  • Interceptor orange wrap
  • Interceptor purple wrap
  • Interceptor pink wrap
  • Interceptor teal wrap
  • Interceptor brown wrap
  • Interceptor gold wrap
  • Interceptor chrome wrap
  • Interceptor color shift wrap
  • Interceptor carbon fiber wrap
  • Interceptor camo and patterned wrap

How much vinyl to wrap a Jensen Interceptor

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1976convertible, hatchback (2 or 3 doors)186.0 in (4,724 mm)about 49 ft (15 m) for the convertible to 52 ft (16 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Interceptor wrap cost factors

Interceptor wrap cost depends on the size of the body, film choice, and labor to remove or work around parts. The car is 186.0 in (4,724 mm) long with a convertible or hatchback body. A full wrap takes about 49 ft (15 m) to 52 ft (16 m) of film, before waste.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 52 ft (16 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, hatchback (2 or 3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Interceptor wraps by generation

Swipe sideways. Tap a card for the full description.

Jensen Interceptor, first generation, factory photo
Factory color shown

1966–1976 Interceptor convertible, hatchback (first generation)

1966–1976convertible, hatchback (2 or 3 doors)186.0 in (4,724 mm)

The first generation Jensen Interceptor has an open top on the convertible. The fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the convertible to 52 ft (16 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Interceptor

The Interceptor can have a partial wrap on the roof, hood, or mirror caps. Interceptor chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Jensen Interceptor: body, cut-outs and film

The Jensen Interceptor vinyl wrap covers a body offered as a convertible or a hatchback with 2 or 3 doors. The car is 186.0 in (4,724 mm) long. A hatchback tailgate with glass in it ends the film at the edge of the glass.

Interceptor wrap ideas include the tailgate with rear glass, where film stops at the glass edge. A convertible top is not wrapped and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own.

How much vinyl to wrap an Interceptor changes most between the convertible and the hatchback. The convertible needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. The hatchback needs about 52 ft (16 m). Chrome or patterned film can take up to about 66 ft (20 m).

More Jensen wraps

Questions about wrapping a Jensen Interceptor

How much vinyl does it take to wrap a Jensen Interceptor?

About 49 ft (15 m) to 52 ft (16 m) of vinyl, depending on body style: the convertible needs about 49 ft (15 m) and the hatchback about 52 ft (16 m) of 60-inch (1.52 m) cast film.

Is the top of an Interceptor wrapped?

No, the top of an Interceptor is not wrapped on a convertible. The fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own.

Which Interceptor body takes more film?

The hatchback takes more film than the convertible. The hatchback needs about 52 ft (16 m) and the convertible about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of an Interceptor?

Yes, you can wrap only the hood or the roof of an Interceptor. A partial wrap covers the roof, hood, or mirror caps. Chrome delete covers window trim and badges. Paint protection film (PPF) is clear film on the front end.