A Robo-01 wrapped in brown is a reversible color change that covers the factory paint completely on wrapped panels. Choose the finish first, because matte, satin, gloss, and metallic browns change the car's character before the exact film brand matters. A glossy brown looks closest to a factory paint option, while a matte brown gives a modern, non-reflective surface. Satin sits between them with a slight sheen that hides fingerprints better than gloss.
Factory paint on the Robo-01 stays protected under the vinyl, but any stone chips or scratches should be repaired before wrapping to avoid visible bumps. A full wrap leaves seams at panel edges, door handles, and around the charge port door. The tailgate with the rear glass means the film ends at the edge of the glass, so the installer must trim precisely. Doors are wrapped with the film tucked into the jambs for a clean edge when open.
Brown wrap film on the Robo-01 is removable, and proper removal by a trained installer leaves the factory paint as it was. Hand wash the wrapped car with a soft sponge and pH-neutral soap, and avoid automatic car washes with brushes. The charge port door is wrapped as a small separate piece, so it can be opened normally without stressing the film. Use a gentle touch around the front sensors and cameras, as aggressive scrubbing can lift an edge.


