How much vinyl to wrap a car depends on the body: a sedan takes 17.5 m (57 ft). That figure is for cast color-change vinyl on a roll 1.52 m (60 in) wide. A coupe needs less, while chrome or patterned film needs noticeably more.

Key facts

  • The film calculator on this site estimates 17.5 m (57 ft) of cast color-change vinyl for a full sedan wrap.
  • By those estimates, 50 ft covers a coupe, a city car or a convertible in cast vinyl, but not a sedan.
  • Chrome film needs the longest length for every body type because it marks easily.
  • Each estimate assumes a 1.52 m (60 in) roll and includes spare film for one re-cut panel.

Film for a full wrap by body type

Body type sets the length of film more than any other factor. The figures below come from the film calculator on this site. All of them assume a roll 1.52 m (60 in) wide. Each one is rounded up to the next half meter and includes spare for one re-cut panel.

Treat each row as an estimate for a typical body, not as a cutting plan. A long-wheelbase version, big bumpers or a roof spoiler will push the real figure up.

Body typeCast color-change vinylCalendered vinylChrome filmCarbon, brushed or patterned film
Sedan17.5 m (57 ft)18 m (59 ft)20.5 m (67 ft)19 m (62 ft)
SUV19 m (62 ft)19.5 m (64 ft)21.5 m (71 ft)20 m (66 ft)
Hatchback16.5 m (54 ft)17 m (56 ft)19.5 m (64 ft)18 m (59 ft)
Coupe15 m (49 ft)15.5 m (51 ft)17 m (56 ft)16 m (52 ft)
Minivan23 m (75 ft)23.5 m (77 ft)26.5 m (87 ft)24.5 m (80 ft)
Convertible13 m (43 ft)13.5 m (44 ft)15.5 m (51 ft)14.5 m (48 ft)
Wagon17.5 m (57 ft)18 m (59 ft)22 m (72 ft)20.5 m (67 ft)
City car14.5 m (48 ft)15 m (49 ft)17 m (56 ft)16 m (52 ft)
Pickup21 m (69 ft)21.5 m (71 ft)23.5 m (77 ft)22 m (72 ft)
Off-roader18.5 m (61 ft)18.5 m (61 ft)23 m (75 ft)19 m (62 ft)
Van27 m (89 ft)28 m (92 ft)32.5 m (107 ft)28 m (92 ft)

Feet of vinyl for a sedan, SUV or van

Body type answers "how many feet of vinyl do I need to wrap a car" in each case. In cast color-change vinyl, a sedan takes 57 ft and an SUV takes 62 ft. A hatchback needs 54 ft, a pickup 69 ft and a minivan 75 ft. A van tops the whole table of body types at 89 ft.

Order the whole length as one piece from one production batch whenever you can. Shade can vary slightly between batches, and the difference shows on panels side by side.

Whether 50 ft is enough to wrap a car

Fifty feet is enough for a small body in cast vinyl, with very little to spare. By the calculator, a coupe needs 49 ft, a city car 48 ft and a convertible 43 ft. A sedan at 57 ft and a hatchback at 54 ft need a longer length.

The spare in each estimate covers one re-cut panel, not a string of mistakes. A first-time installer should plan film beyond the estimate or buy a longer length.

Why chrome and patterned films take more

Film type changes the length, since each film is cut and placed in its own way. Chrome film marks easily, so the estimate carries more extra film for spoiled pieces. A sedan takes 20.5 m (67 ft) of chrome against 17.5 m (57 ft) of cast vinyl.

Carbon, brushed and patterned films have a direction that must match on every panel. Pieces cannot be rotated to fit the roll, so more film ends up as offcuts.

Paint protection film (PPF) goes the other way and needs a shorter length. PPF is cut closer to the panel edge than vinyl, so a sedan takes 15 m (49 ft).

Extra film for door jambs and complex shapes

Wrapping the door jambs adds film that a basic full-wrap estimate may leave out. Jambs show whenever a door opens, and the old color stays visible there unless they are covered.

Deep bumpers, vents and sharp body lines also eat into the spare film. Ask the installer how many extra pieces the shape will need before ordering. Single panels follow the same logic, and the guide to partial wraps gives their lengths.

Working out how much vinyl wrap you need

The question "how much vinyl wrap do I need" has four inputs, and each one changes the result. Work through them in order, then check the total against the film calculator.

The film calculator on this site takes body type, size, film type, roll width and coverage. Its result is an estimate, so confirm the length with the installer before you order.

  • Name the body type: sedan, SUV, hatchback, coupe, pickup, van or another.
  • Pick the film type, since chrome and patterned films need more length.
  • Check the roll width, because a roll narrower than 1.52 m adds seams.
  • Decide the coverage: the full body, the door jambs too, or only some panels.
  • Add spare film if you plan to wrap the car yourself.

Questions

How many feet of vinyl do I need to wrap a car?

A sedan needs about 57 ft of cast color-change vinyl on a 60 inch roll. An SUV needs about 62 ft, a coupe about 49 ft and a minivan about 75 ft. Chrome and patterned films need more than these figures.

Is 50 ft enough to wrap a car?

Fifty feet covers only small bodies by the calculator's estimates. A coupe, a city car or a convertible fits within it in cast vinyl. A sedan, SUV or hatchback needs a longer length.

How many feet is a full roll of vinyl wrap?

Full roll length is set by each manufacturer and differs between products. Read the length on the label and compare it with the estimate for your body type. The guide to roll sizes explains what else the label shows.

How do I work out how much vinyl wrap I need?

Start from the body type, then adjust for film type, roll width and coverage. The film calculator on this site combines those inputs into one estimate. Add spare film if this is your first wrap.