A Kia EV6 wrapped in purple is a full color change over the factory paint. Start with the finish you want from matte, satin, gloss, metallic, pearl or glitter, each with its own feel. Then choose the film from that finish group, since two films can look close but lay differently. A full wrap covers the body, while a partial wrap leaves most of the original color.

The EV6 factory paint stays under the film, so it must be clean and smooth before any panel is wrapped. On this SUV, the tailgate film ends at the edge of the rear glass, which changes how one big piece is cut. Seams are placed where panels meet, in body lines, to keep the film flat over a surface 184.3 in (4,680 mm) long. About 62 ft (19 m) of 60-inch (1.52 m) cast film covers the body, and chrome or patterned film needs about 70 ft (21.5 m).

A purple wrap on the EV6 is removable, so the factory color is there when the film comes off. The film is cut around parking sensors on every trim, cameras on some trims, and the sunroof opening on some trims. Charge the car with the film in place, since the charge port door is wrapped as a small piece of its own. Clean a wrapped EV6 by hand wash, not by automatic brushes, to protect the film edges.