A Discovery wrapped in gray starts with choosing the finish, because the same gray tone will look different in matte, satin, gloss, or metallic. The color change wrap is a full film over the factory paint, so the factory color only matters at door jambs and other unwrapped gaps. Some gray films are nearly achromatic, while others carry blue or green undertones that only show in daylight. Pick the film first, then decide how much of the Discovery to cover.
The Land Rover Discovery has tall, flat sides and a long roof, so a color change wrap uses about 67 ft (20.5 m) of 60-inch (1.52 m) film on the L462 body. The factory paint remains underneath and is not altered by the film, but any deep scratches or stone chips should be leveled before installation. Long roof panels and the rear tailgate often need seams where the film width ends. A good installer plans those seams along body lines so they stay subtle.
A gray wrap on the Discovery is removable, so it can return the body to factory paint when removed correctly. Removal leaves no residue on original paint if the film was installed on sound clearcoat and pulled with controlled heat. The wrap is cared for with hand wash using a soft mitt and pH-neutral shampoo, not automatic brushes or pressure washing at edges. Hand washing keeps the film clean and the edges sealed.



