Wraps by car

Land Rover Discovery wrap

A Land Rover Discovery wrap covers the body of the fifth generation SUV, plus four earlier generations, with cast vinyl film. The newest Discovery needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full color change. The Land Rover Discovery wrap catalog spans five generations from 1989 to now.

5generations20.5 mof film for a full wrap

Land Rover Discovery, fifth generation, factory photo
Land Rover Discovery, fifth generation. Factory color shown.

Land Rover Discovery wrap colors and ideas

  • Discovery black wrap
  • Discovery white wrap
  • Discovery gray wrap
  • Discovery silver wrap
  • Discovery red wrap
  • Discovery blue wrap
  • Discovery green wrap
  • Discovery yellow wrap
  • Discovery orange wrap
  • Discovery purple wrap
  • Discovery pink wrap
  • Discovery teal wrap
  • Discovery brown wrap
  • Discovery gold wrap
  • Discovery chrome wrap
  • Discovery color shift wrap
  • Discovery carbon fiber wrap
  • Discovery camo and patterned wrap

How much vinyl to wrap a Land Rover Discovery

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowSUV (5 doors)195.1 in (4,956 mm) to 195.7 in (4,970 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
2009–2017SUV (5 doors)190.1 in (4,829 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
2004–2009SUV (5 doors)190.4 in (4,835 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1998–2004SUV (5 doors)185.2 in (4,705 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1989–1998SUV (3 or 5 doors)178.1 in (4,524 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Discovery wrap cost factors

Discovery wrap cost depends on the amount of film, the number of separate pieces, and the time to remove parts or wrap high areas. The newest Discovery uses about 67 ft (20.5 m) of cast film, and a chrome delete or patterned film raises the amount to about 87 ft (26.5 m). A taller body and more cut-outs for sensors or cameras also increase labor time and thus cost.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (74.3 in (1,888 mm)): the roof is wrapped from a platform.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Discovery wraps by generation

Swipe sideways. Tap a card for the full description.

Land Rover Discovery, fifth generation, factory photo
Factory color shown

2016–now Discovery SUV (fifth generation)

2016–nowSUV (5 doors)195.1 in (4,956 mm) to 195.7 in (4,970 mm)

The fifth generation Land Rover Discovery spans 2016 to now and has a glass roof option that is not wrapped. That keeps the roof dark no matter what color film is used on the rest of the car. The vehicle may also have roof rails or a sunroof, which change how the roof film is cut.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (74.3 in (1,888 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Land Rover Discovery, fourth generation, factory photo
Factory color shown

2009–2017 Discovery SUV (fourth generation)

2009–2017SUV (5 doors)190.1 in (4,829 mm)

The fourth generation Land Rover Discovery covers 2009 to 2017, and a restyling in 2013 helps installers identify which body a car has. Because the fifth generation starts in 2016, a Discovery from 2016 or 2017 could be either body, so the owner should check the body code. The film estimate for this generation is about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (74.3 in (1,887 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Land Rover Discovery, third generation, factory photo
Factory color shown

2004–2009 Discovery SUV (third generation)

2004–2009SUV (5 doors)190.4 in (4,835 mm)

The third generation Land Rover Discovery runs from 2004 to 2009 and has a height of 74.3 in (1,887 mm). That tall body means the roof is wrapped from a platform, which adds time to the job. This generation has fewer cut-outs than later ones, but fog lamps on some trims still need openings in the bumper film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (74.3 in (1,887 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Land Rover Discovery, second generation, factory photo
Factory color shown

1998–2004 Discovery SUV (second generation)

1998–2004SUV (5 doors)185.2 in (4,705 mm)

The second generation Land Rover Discovery was built from 1998 to 2004, and paint age is a key factor before a full wrap. On a car of these years, panels may be original or repainted, and a test spot checks adhesion before the wrap starts. The body is 185.2 in (4,705 mm) long and needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (78.0 in (1,980 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Land Rover Discovery, first generation, factory photo
Factory color shown

1989–1998 Discovery SUV (first generation)

1989–1998SUV (3 or 5 doors)178.1 in (4,524 mm)

The first generation Land Rover Discovery from 1989 to 1998 came as a three-door or five-door SUV, and its smaller size changes film needs. At 178.1 in (4,524 mm) long and 77.5 in (1,968 mm) tall, it uses about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. The three-door body has fewer panels to cover but the same tall roof, which is wrapped from a platform.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (77.5 in (1,968 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Discovery

Partial wraps on a Land Rover Discovery can cover just the hood, mirror caps, or roof on cars without the glass panel. A Discovery chrome delete replaces bright window trim and badges with black film for a different look. Paint protection film (PPF) is another option: clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Land Rover Discovery: body, cut-outs and film

Planning a Land Rover Discovery vinyl wrap starts with the SUV's five-door body, which is the sole style for most generations. The newest Discovery is 195.1 in (4,956 mm) to 195.7 in (4,970 mm) long, and its height means the roof is wrapped from a platform. The first generation offered three doors as well as five, and its 178.1 in (4,524 mm) length reduces the amount of film needed.

Discovery wrap ideas must account for the tailgate with its rear glass, where the film ends at the edge of the glass. On some trims of the newest Discovery, a panoramic glass roof is left unwrapped, so the film stops at the roof rails. Parking sensors and cameras on some trims require the installer to cut the film around each sensor and lens. Fog lamps may also need cut-outs in the front bumper film.

How much vinyl to wrap a Discovery depends on the generation and its features. The fifth generation takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, while the first takes about 66 ft (20 m). A chrome or patterned film on the same car calls for about 87 ft (26.5 m) on the newest model but about 76 ft (23 m) on the first generation. The size difference comes mainly from body length and film width management.

Questions about wrapping a Land Rover Discovery

How much vinyl does it take to wrap a Land Rover Discovery?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap the newest Land Rover Discovery. That figure covers a full color change wrap on the fifth generation body from 2016 onward. For chrome or patterned film, the amount rises to about 87 ft (26.5 m).

Can the roof of a Discovery be wrapped?

Yes, the roof of a Discovery can be wrapped, but on some trims the glass panel is not covered. If the car has a panoramic glass roof or sunroof, the film is cut around that opening. Roof rails, when present, are removed or the film is cut along them, and the tall body means working from a platform.

Which years of the Discovery take the same film cuts?

The Discovery bodies share film cuts within their generations, with restyling years marking changes. The first generation (1989–1998) and second generation (1998–2004) each have consistent cuts. The third generation runs 2004–2009 with no restyling. The fourth generation was built 2009–2017 and restyled in 2013, while the fifth generation started in 2016 and was restyled in 2020.

Can I wrap only the hood or the roof of a Discovery?

Yes, you can wrap only the hood or the roof of a Discovery. Partial jobs include the hood, mirror caps, and roof on cars without the glass panel. A chrome delete for window trim and badges and paint protection film on the front end are other smaller options.