Wraps by car

Land Rover Series II wrap

This page covers the Land Rover Series II wrap for the 1958–1971 first generation. The catalog has one generation of the Series II. A full vinyl wrap of the newest body takes about 49 ft (15 m) for the pickup to 52 ft (16 m) for the SUV in 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Land Rover Series II, first generation, factory photo
Land Rover Series II, first generation. Factory color shown.

Land Rover Series II wrap colors and ideas

  • Series II black wrap
  • Series II white wrap
  • Series II gray wrap
  • Series II silver wrap
  • Series II red wrap
  • Series II blue wrap
  • Series II green wrap
  • Series II yellow wrap
  • Series II orange wrap
  • Series II purple wrap
  • Series II pink wrap
  • Series II teal wrap
  • Series II brown wrap
  • Series II gold wrap
  • Series II chrome wrap
  • Series II color shift wrap
  • Series II carbon fiber wrap
  • Series II camo and patterned wrap

How much vinyl to wrap a Land Rover Series II

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1958–1971SUV, pickup (2 or 3 doors)142.4 in (3,617 mm)about 49 ft (15 m) for the pickup to 52 ft (16 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Series II wrap cost factors

A Series II wrap cost depends on the body style, the film you pick, and the labor for cut-outs and high roof work. The pickup takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, the SUV about 52 ft (16 m), and chrome or patterned film up to about 62 ft (19 m). The tailgate glass and pickup bed edges add trimming time, and the 77.5 in (1,969 mm) tall roof needs a platform.

  • Film for a full wrap: about 49 ft (15 m) for the pickup to 52 ft (16 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: SUV, pickup (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (77.5 in (1,969 mm)): the roof is wrapped from a platform.

Series II wraps by generation

Swipe sideways. Tap a card for the full description.

Land Rover Series II, first generation, factory photo
Factory color shown

1958–1971 Series II SUV, pickup (first generation)

1958–1971SUV, pickup (2 or 3 doors)142.4 in (3,617 mm)

The first generation Series II has a pickup bed that changes how the film is applied. The cab and the bed are two bodies for the film, and the inside of the bed stays bare. Because the bed has no glass or trim on its inner walls, the installer wraps only the outside surfaces of the cab and the bed sides.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (77.5 in (1,969 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) for the pickup to 52 ft (16 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Series II

A partial wrap on a Series II can cover the roof, hood, or mirror caps without the full body. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Land Rover Series II: body, cut-outs and film

The Land Rover Series II vinyl wrap changes with the body style you choose. The SUV and pickup (2 or 3 doors) measure 142.4 in (3,617 mm) long. A wrap of the pickup runs about 49 ft (15 m), while the SUV takes about 52 ft (16 m), because the pickup bed is wrapped as a separate body.

Series II wrap ideas start with the parts that need cut-outs or come off. The tailgate with the rear glass in it means the film ends at the edge of the glass. The pickup bed means the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The tall body at 77.5 in (1,969 mm) means the roof is wrapped from a platform.

How much vinyl to wrap a Series II depends on the body you have, and the catalog lists one generation from 1958–1971. The film estimate is about 49 ft (15 m) for the pickup to 52 ft (16 m) for the SUV, using 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 62 ft (19 m). No generation change means the film estimate stays the same for all years.

Questions about wrapping a Land Rover Series II

How much vinyl does it take to wrap a Land Rover Series II?

A Land Rover Series II needs about 49 ft (15 m) for the pickup to 52 ft (16 m) for the SUV of 60-inch (1.52 m) cast film. The estimate is for the first generation body from 1958–1971. Chrome or patterned film can take up to about 62 ft (19 m).

Is the bed of a Series II wrapped?

No, the inside of the Series II pickup bed is not wrapped. The cab and the bed are wrapped as two bodies, but the film goes only on the outside surfaces. The inside of the bed stays bare.

Which Series II body takes more film?

The SUV body of the Series II takes more film than the pickup. The SUV needs about 52 ft (16 m), while the pickup takes about 49 ft (15 m) of 60-inch (1.52 m) film.

Can I wrap only the hood or the roof of a Series II?

Yes, you can wrap only the hood or the roof of a Series II as a partial wrap. A partial wrap can also cover the mirror caps. Paint protection film on the front end and chrome delete of window trim and badges are other partial jobs.