Wraps by car

Land Rover Freelander wrap

The Land Rover Freelander wrap page covers the first and second generations of this compact SUV, built from 1997 to 2014. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 70 ft (21.5 m). The film is cut and fitted to the body of the car section by section.

2generations18.5 mof film for a full wrap

Land Rover Freelander, second generation, factory photo
Land Rover Freelander, second generation. Factory color shown.

Land Rover Freelander wrap colors and ideas

  • Freelander black wrap
  • Freelander white wrap
  • Freelander gray wrap
  • Freelander silver wrap
  • Freelander red wrap
  • Freelander blue wrap
  • Freelander green wrap
  • Freelander yellow wrap
  • Freelander orange wrap
  • Freelander purple wrap
  • Freelander pink wrap
  • Freelander teal wrap
  • Freelander brown wrap
  • Freelander gold wrap
  • Freelander chrome wrap
  • Freelander color shift wrap
  • Freelander carbon fiber wrap
  • Freelander camo and patterned wrap

How much vinyl to wrap a Land Rover Freelander

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2014SUV (5 doors)177.2 in (4,500 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1997–2006SUV (3 or 5 doors)172.5 in (4,382 mm) to 174.1 in (4,423 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Freelander wrap cost factors

Freelander wrap cost depends on the size of the car and how much of it you want covered. The second generation is 177.2 in (4,500 mm) long, and the first generation runs from 172.5 in (4,382 mm) to 174.1 in (4,423 mm). The cost also depends on the film type, such as a color change wrap or chrome delete, and how many cut-outs the body needs. A partial job on the roof or hood costs less than a full wrap.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2010, 2012: bumpers and lights differ between the versions, and so do the film cuts.

Freelander wraps by generation

Swipe sideways. Tap a card for the full description.

Land Rover Freelander, second generation, factory photo
Factory color shown

2006–2014 Freelander SUV (second generation)

2006–2014SUV (5 doors)177.2 in (4,500 mm)

The second generation Land Rover Freelander was restyled in 2010 and again in 2012. The bumpers and lights changed with each restyling. This means film pre-cut for one version does not fit the other, so a wrap shop measures the exact car before cutting. The body length stays the same through these years.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Land Rover Freelander, first generation, factory photo
Factory color shown

1997–2006 Freelander SUV (first generation)

1997–2006SUV (3 or 5 doors)172.5 in (4,382 mm) to 174.1 in (4,423 mm)

The first generation Land Rover Freelander ran from 1997 to 2006, so paint age is a key factor before a wrap. Panels may be original or repainted, and the film may pull old paint when it is removed. A test spot comes before a full wrap to check how the paint holds. The body has three or five doors depending on the year.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.2 in (1,757 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Freelander

Freelander chrome delete and partial wrap jobs are offered on the roof, hood, and mirror caps. The window trim and badges can be covered with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. A partial wrap is a good way to change the look without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Land Rover Freelander: body, cut-outs and film

The Land Rover Freelander vinyl wrap is sized for an SUV with a tall, boxy body. The second generation from 2006 to 2014 measures 177.2 in (4,500 mm) long and has five doors. The first generation from 1997 to 2006 came with three or five doors and ranges from 172.5 in (4,382 mm) to 174.1 in (4,423 mm) in length. These dimensions mean a wrap uses more film on the roof, pillars, and large tailgate than on a smaller car.

Freelander wrap ideas start with a tailgate that has the rear glass in it, so the film ends at the edge of the glass. On some trims with a sunroof, the roof film is cut around its opening. Parking sensors, cameras, or fog lamps on some trims require careful cut-outs in the film. These details keep the wrap clean around factory features.

To work out how much vinyl to wrap a Freelander, check the generation of the car. The second generation needs about 61 ft (18.5 m) of cast film for a full wrap. The first generation uses about 59 ft (18 m) because the body is slightly smaller. Film width is 60 inches (1.52 m) for both.

Questions about wrapping a Land Rover Freelander

How much vinyl does it take to wrap a Land Rover Freelander?

A Land Rover Freelander full wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast vinyl. This figure is for the second generation body, which is the newest. The first generation takes slightly less at about 59 ft (18 m). Chrome or patterned film adds about 9 ft (3 m) to the estimate.

Can the roof of a Freelander be wrapped?

Yes, the roof of a Freelander can be wrapped. The roof is part of a partial wrap job and is often done in black or a contrasting color. On the first generation the body is 69.2 in (1,757 mm) tall, so the roof is wrapped from a platform. Some trims have a sunroof, and the film is cut around its opening.

Which years of the Freelander take the same film cuts?

The same film cuts fit the Freelander within each generation until a restyling. For the second generation, the 2010 and 2012 restylings changed the bumpers and lights, so cuts differ between early and late cars. For the first generation, the 2003 restyling is the break point. A shop measures the car to match the cut to the year.

Can I wrap only the hood or the roof of a Freelander?

Yes, you can wrap only the hood or the roof of a Freelander. These are standard partial wrap jobs, along with the mirror caps. A hood wrap is a simple rectangle, and a roof wrap covers the panel between the roof rails. Chrome delete on the window trim and badges is another small job you can choose.