Wraps by car

Land Rover Series III wrap

The Land Rover Series III wrap page covers the first generation built from 1971 to 1985 and its SUV body with five doors. A full color change wrap on this vehicle uses about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl wrap. If the design includes chrome or patterned film, the total vinyl wrap needed rises to about 69 ft (21 m). This catalog has one generation of the Land Rover Series III.

1generations18 mof film for a full wrap

Land Rover Series III, first generation, factory photo
Land Rover Series III, first generation. Factory color shown.

Land Rover Series III wrap colors and ideas

  • Series III black wrap
  • Series III white wrap
  • Series III gray wrap
  • Series III silver wrap
  • Series III red wrap
  • Series III blue wrap
  • Series III green wrap
  • Series III yellow wrap
  • Series III orange wrap
  • Series III purple wrap
  • Series III pink wrap
  • Series III teal wrap
  • Series III brown wrap
  • Series III gold wrap
  • Series III chrome wrap
  • Series III color shift wrap
  • Series III carbon fiber wrap
  • Series III camo and patterned wrap

How much vinyl to wrap a Land Rover Series III

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1985SUV (5 doors)152.9 in (3,883 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Series III wrap cost factors

The Series III wrap cost depends on the size of the body and the film choice, not on a fixed price. This Land Rover Series III is 152.9 in (3,883 mm) long and 78.5 in (1,993 mm) tall, so a full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. A wrap with chrome or patterned film needs about 69 ft (21 m) of material, which changes the total cost. The number of cut-outs, like the tailgate glass, and the need to remove parts also affect the final cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (78.5 in (1,993 mm)): the roof is wrapped from a platform.

Series III wraps by generation

Swipe sideways. Tap a card for the full description.

Land Rover Series III, first generation, factory photo
Factory color shown

1971–1985 Series III SUV (first generation)

1971–1985SUV (5 doors)152.9 in (3,883 mm)

The first generation of the Land Rover Series III, produced from 1971 to 1985, has a body height of 78.5 in (1,993 mm). The roof of this SUV is wrapped from a platform, which adds time to the installation. The flat panels of the body are easy to work with, but the tall sides require care. The tailgate has glass set into it, so the film must be trimmed around that edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (78.5 in (1,993 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Series III

A partial wrap on a Land Rover Series III can cover the roof, the hood, or the mirror caps as separate jobs. The roof is a large area because of the body height of 78.5 in (1,993 mm), so it is a common choice for a two-tone look. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another partial job, with clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Land Rover Series III: body, cut-outs and film

A Land Rover Series III vinyl wrap covers a body that is 152.9 in (3,883 mm) long and has a tall shape of 78.5 in (1,993 mm). The straight sides and flat panels of this SUV make large pieces of film easier to cut and lay. However, the tall body means the roof area is large and adds to the total area of film. The five-door layout also gives the installer long vertical sections to wrap on each side.

Series III wrap ideas often start with the tailgate, which holds the rear glass, so the film stops cleanly at the edge of the glass. The installer must remove the spare wheel if it is mounted on the back, along with door handles and mirrors. The tall body means the roof of the Land Rover Series III is wrapped from a platform, not from the ground. Badges and trim can be taken off for a neat finish under the film.

To know how much vinyl to wrap a Series III, compare changes between generations, but this model has only one generation. The body length of 152.9 in (3,883 mm) and the roof height of 78.5 in (1,993 mm) stay the same for every year from 1971 to 1985. Since there are no major body updates, the film estimate of about 59 ft (18 m) works for all Series III vehicles. A design with chrome or patterned film needs about 69 ft (21 m) because those films have less usable width.

Questions about wrapping a Land Rover Series III

How much vinyl does it take to wrap a Land Rover Series III?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Land Rover Series III. If you use chrome or patterned film, the amount goes up to about 69 ft (21 m) because those films are less efficient to cut. This estimate covers a full color change wrap on the first generation SUV, which is the only generation of the Series III.

Can I wrap only the hood or the roof of a Series III?

Yes, you can wrap only the hood or the roof of a Series III. The roof is large because the body is 78.5 in (1,993 mm) tall, so it makes a strong visual change. The hood is also a simple flat panel to wrap on its own. Mirror caps are another small partial wrap option on this Land Rover.

Is a Series III hard to wrap?

Yes, a Series III is moderately hard to wrap because of its size and some details. The body is 152.9 in (3,883 mm) long and 78.5 in (1,993 mm) tall, so the roof is wrapped from a platform, which adds work. The tailgate has glass in it, so the film must be cut carefully around that edge. The flat panels help, but the height and the tailgate make the job slower than a small car.

How many generations of the Series III does this page cover?

This page covers one generation of the Series III, built from 1971 to 1985. The Land Rover Series III had a single body style, an SUV with five doors, and no major changes over the years. That means the wrap film estimate of about 59 ft (18 m) works for every Series III.