Wraps by car

Land Rover Defender wrap

The Land Rover Defender wrap page covers both generations of this off-road SUV and the vinyl wrap film they take. The newest Defender has been built since 2019 in three body lengths, with the 130 as the longest at 210.9 in (5,358 mm). A full wrap of this modern body needs about 79 ft (24 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 10 ft (3 m) to that figure.

2generations24 mof film for a full wrap

Land Rover Defender, second generation, factory photo
Land Rover Defender, second generation. Factory color shown.

Land Rover Defender wrap colors and ideas

  • Defender black wrap
  • Defender white wrap
  • Defender gray wrap
  • Defender silver wrap
  • Defender red wrap
  • Defender blue wrap
  • Defender green wrap
  • Defender yellow wrap
  • Defender orange wrap
  • Defender purple wrap
  • Defender pink wrap
  • Defender teal wrap
  • Defender brown wrap
  • Defender gold wrap
  • Defender chrome wrap
  • Defender color shift wrap
  • Defender carbon fiber wrap
  • Defender camo and patterned wrap

How much vinyl to wrap a Land Rover Defender

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (3 or 5 doors)180.4 in (4,583 mm) to 210.9 in (5,358 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m)
1990–2016SUV, open-top SUV, pickup (2 or 3 or 4 or 5 doors)152.9 in (3,883 mm) to 182.6 in (4,639 mm)about 46 ft (14 m) for the open-top SUV to 67 ft (20.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)

Defender wrap cost factors

Defender wrap cost depends on the body size, the number of cut-outs, and the film type. The 130 needs more material than the 90, and a body with a styling kit has more separate pieces to wrap. Chrome or patterned film takes about 89 ft (27 m) on the current model, against 79 ft (24 m) for standard cast film. Removing roof rails or a two-tone roof split adds labor.

  • Film for a full wrap: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).
  • Body: SUV (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (77.7 in (1,974 mm)): the roof is wrapped from a platform.

Defender wraps by generation

Swipe sideways. Tap a card for the full description.

Land Rover Defender, second generation, factory photo
Factory color shown

2019–now Defender SUV (second generation)

2019–nowSUV (3 or 5 doors)180.4 in (4,583 mm) to 210.9 in (5,358 mm)

The roof of the second generation Defender is never wrapped when it has the glass panel. The film ends at the roof rails, so the dark glass stays dark no matter what color is chosen for the rest of the roof. This leaves the roof as a fixed black element on cars with that option.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (77.7 in (1,974 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).

1990–2016 Defender SUV, open-top SUV, pickup (first generation)

1990–2016SUV, open-top SUV, pickup (2 or 3 or 4 or 5 doors)152.9 in (3,883 mm) to 182.6 in (4,639 mm)

The first generation Defender needs a test spot on the paint before a full wrap. A car from 1990 to 2016 may have original or repainted panels, and film does not stick the same way to old paint. The test spot shows whether the surface is sound enough for a wrap.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (80.1 in (2,035 mm)): the roof is wrapped from a platform.

Film: about 46 ft (14 m) for the open-top SUV to 67 ft (20.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Defender

A partial wrap on a Land Rover Defender is a natural smaller job for the hood, mirror caps, or a roof without the glass panel. A Defender chrome delete covers the window trim and badges with black film to change the brightwork. Paint protection film (PPF) is another partial option: clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Land Rover Defender: body, cut-outs and film

A Land Rover Defender vinyl wrap is shaped by three body lengths and two door counts on the current model. The 90 is the shortest at 180.4 in (4,583 mm), the 110 sits in the middle, and the 130 reaches 210.9 in (5,358 mm). Three-door and five-door versions change the number of door jambs and handle recesses the installer cuts around. The tall body of 77.7 in (1,974 mm) means the roof is usually wrapped from a platform.

Defender wrap ideas start with the parts that come off or need cut-outs on the current body. Roof rails on some trims should be removed before the roof film goes on, or the film is trimmed along them. Every trim has parking sensors and cameras, so the film is cut around each sensor and lens. A panoramic glass roof is not wrapped, and the film ends at the roof rails.

How much vinyl to wrap a Defender changes between the two generations in the catalog. The first generation, built from 1990 to 2016, ranges from 152.9 in (3,883 mm) to 182.6 in (4,639 mm) and needs about 46 ft (14 m) of film for the open-top SUV. The second generation, from 2019 onward, adds almost 30 in (760 mm) in length and about 33 ft (10 m) of material for a full wrap. The older body also offered open-top and pickup styles that no longer exist on the new one.

Questions about wrapping a Land Rover Defender

How much vinyl does it take to wrap a Land Rover Defender?

It takes about 79 ft (24 m) of 60-inch (1.52 m) cast film to wrap a current Land Rover Defender. That figure covers the five-door 110 body; the shorter 90 uses less and the longer 130 uses more. With chrome or patterned film the estimate rises to about 89 ft (27 m).

Can the roof of a Defender be wrapped?

Yes, the roof of a Defender can be wrapped unless it is glass. A panoramic glass roof is not wrapped, and the film ends at the roof rails. A metal roof is wrapped as a normal panel, often with the roof rails removed first.

Can I wrap only the hood or the roof of a Defender?

Yes, you can wrap only the hood or the roof of a Defender. A hood wrap is a common partial job, and the roof is wrapped on cars without the glass panel. Mirror caps are another small piece offered for a partial wrap.

Is a Defender hard to wrap?

A Defender is harder to wrap than a small city car because of its size and the cut-outs on every trim. The tall body of 77.7 in (1,974 mm) means the roof is reached from a platform. Parking sensors and cameras in the bumpers and body add time to cut around each one.