Wraps by car

LEVC TX wrap

The LEVC TX wrap page covers the first-generation LEVC TX (2017–now) and the film needed for its newest body. A full wrap of this van takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 9 ft (3 m) to that figure. The TX has one generation in our catalog.

1generations18.5 mof film for a full wrap

LEVC TX, first generation, factory photo
LEVC TX, first generation. Factory color shown.

LEVC TX wrap colors and ideas

  • LEVC TX black wrap
  • LEVC TX white wrap
  • LEVC TX gray wrap
  • LEVC TX silver wrap
  • LEVC TX red wrap
  • LEVC TX blue wrap
  • LEVC TX green wrap
  • LEVC TX yellow wrap
  • LEVC TX orange wrap
  • LEVC TX purple wrap
  • LEVC TX pink wrap
  • LEVC TX teal wrap
  • LEVC TX brown wrap
  • LEVC TX gold wrap
  • LEVC TX chrome wrap
  • LEVC TX color shift wrap
  • LEVC TX carbon fiber wrap
  • LEVC TX camo and patterned wrap

How much vinyl to wrap an LEVC TX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowvan (5 doors)191.3 in (4,860 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

LEVC TX wrap cost factors

The LEVC TX wrap cost depends on the film type, the shop's labor, and the van's size. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film raises that to about 70 ft (21.5 m). The tall body at 74.4 in (1,890 mm) adds roof work from a platform. Extra pieces like the charge port door and camera cut-outs increase labor time.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

LEVC TX wraps by generation

Swipe sideways. Tap a card for the full description.

LEVC TX, first generation, factory photo
Factory color shown

2017–now LEVC TX van (first generation)

2017–nowvan (5 doors)191.3 in (4,860 mm)

The first-generation LEVC TX has sliding side doors that define the wrap layout. The door tracks stay bare, and the film is cut along them so the doors can move freely. This means the installer must plan seams at the track edges. The five-door van body makes those cuts a key part of the wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an LEVC TX

For jobs smaller than a full wrap on an LEVC TX, the options are clear. A partial wrap can cover the hood, mirror caps, or trunk lid. Chrome delete applies black film to the window trim and badges. Paint protection film (PPF) is clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, trunk lid.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an LEVC TX: body, cut-outs and film

The LEVC TX vinyl wrap is shaped by the van body and its size. The TX is 191.3 in (4,860 mm) long, with sliding side doors and a tall 74.4 in (1,890 mm) roofline. These dimensions mean a wrap needs long, continuous panels and careful work around the door tracks. The van has five doors, so each opening edge adds cuts and seams.

LEVC TX wrap ideas start with the parts that need cut-outs or come off. Every trim has a panoramic glass roof, so the film ends at the roof rails and the glass is left bare. The sliding door tracks stay uncovered, and the film is trimmed along them. Cameras in the body need the film cut around each lens. The charge port door is wrapped as its own small piece.

How much vinyl to wrap an LEVC TX depends on the generation, and this car has one generation. The first generation (2017–now) is a van with five doors and the same body size throughout. The film estimate of about 61 ft (18.5 m) applies to this generation. There are no earlier bodies to compare.

More LEVC wraps

Questions about wrapping an LEVC TX

How much vinyl does it take to wrap an LEVC TX?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap an LEVC TX. If you choose chrome or patterned film, plan for about 70 ft (21.5 m). That estimate covers the newest body of the first generation.

Are the sliding doors of an LEVC TX wrapped?

The sliding doors of an LEVC TX are wrapped, but their tracks stay bare. The film is cut along the tracks so the doors can open without catching. This leaves a clean line at the track edge.

Can the roof of an LEVC TX be wrapped?

The roof of an LEVC TX can be wrapped. Every trim has a panoramic glass roof, and the glass itself is not wrapped. The film ends at the roof rails, and the installer works from a platform because the body is 74.4 in (1,890 mm) tall.

Can I wrap only the hood or the roof of an LEVC TX?

Yes, you can wrap only the hood or the roof of an LEVC TX. A partial wrap on this van can cover the hood, mirror caps, or trunk lid. The roof alone is not usually a partial job because of the panoramic glass, but the hood is a common choice.