Wraps by car

LEVC VN5 wrap

This page covers an LEVC VN5 wrap, from full vinyl wrap coverage to smaller jobs on the five-door van body. The LEVC VN5 has one generation in the catalog, produced from 2020 to now. A full wrap of the newest body takes about 85 ft (26 m) of 60-inch (1.52 m) cast film. Using chrome or patterned film increases that estimate to about 97 ft (29.5 m).

1generations26 mof film for a full wrap

LEVC VN5, first generation, factory photo
LEVC VN5, first generation. Factory color shown.

LEVC VN5 wrap colors and ideas

  • LEVC VN5 black wrap
  • LEVC VN5 white wrap
  • LEVC VN5 gray wrap
  • LEVC VN5 silver wrap
  • LEVC VN5 red wrap
  • LEVC VN5 blue wrap
  • LEVC VN5 green wrap
  • LEVC VN5 yellow wrap
  • LEVC VN5 orange wrap
  • LEVC VN5 purple wrap
  • LEVC VN5 pink wrap
  • LEVC VN5 teal wrap
  • LEVC VN5 brown wrap
  • LEVC VN5 gold wrap
  • LEVC VN5 chrome wrap
  • LEVC VN5 color shift wrap
  • LEVC VN5 carbon fiber wrap
  • LEVC VN5 camo and patterned wrap

How much vinyl to wrap an LEVC VN5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowvan (5 doors)205.9 in (5,230 mm)about 85 ft (26 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 97 ft (29.5 m)

LEVC VN5 wrap cost factors

LEVC VN5 wrap cost is determined by the amount of film, the number of cut-outs, and the tall body that needs a platform. A full wrap uses about 85 ft (26 m) of 60-inch (1.52 m) cast film, or about 97 ft (29.5 m) for chrome or patterned film. The sliding door tracks and charge port door create extra cutting and finishing steps. Installers also need time to reach the 78.3 in (1,990 mm) roof safely.

  • Film for a full wrap: about 85 ft (26 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 97 ft (29.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (78.3 in (1,990 mm)): the roof is wrapped from a platform.

LEVC VN5 wraps by generation

Swipe sideways. Tap a card for the full description.

LEVC VN5, first generation, factory photo
Factory color shown

2020–now LEVC VN5 van (first generation)

2020–nowvan (5 doors)205.9 in (5,230 mm)

The first generation LEVC VN5, built from 2020 to now, is the only body style in the catalog and comes as a five-door van. Its sliding side doors dominate the sides, and the tracks stay bare, which dictates where the film is cut. The charge port door is wrapped as a small piece of its own, especially on plug-in and electric versions. The tall body means the roof is always wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (78.3 in (1,990 mm)): the roof is wrapped from a platform.

Film: about 85 ft (26 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 97 ft (29.5 m).

Roof, hood, chrome delete and PPF on an LEVC VN5

A partial wrap on the LEVC VN5 can cover the roof, hood, or mirror caps without a full color change. Chrome delete (bright trim covered with black film) is a common request for the window trim and badges. Paint protection film (PPF) is another option, with clear film applied to the front end to guard against stone chips. These smaller jobs still require care around the sliding door tracks and charge port door.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an LEVC VN5: body, cut-outs and film

An LEVC VN5 vinyl wrap must cover a tall minivan body that is 205.9 in (5,230 mm) long and 78.3 in (1,990 mm) high. The roof requires a work platform, and the five-door layout includes two sliding side doors. The sliding door tracks stay bare, so the film is cut along them for clean edges. These proportions make a full wrap a sizable job with long continuous panels.

LEVC VN5 wrap ideas should account for the sliding side door tracks, where the film is cut along the bare metal. The charge port door on plug-in and electric versions is wrapped as a small separate piece, so it can be removed and finished cleanly. The tall roof is reachable only from a platform, which adds setup time for any roof design. Chrome delete can also cover the window trim and badges with black film.

How much vinyl to wrap an LEVC VN5 depends on the film type and the body size of the one generation, which runs from 2020 to now. A standard color change wrap needs about 85 ft (26 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires more material, about 97 ft (29.5 m), because the pattern must be matched. No earlier generation exists, so the estimate stays the same for all years in the catalog.

More LEVC wraps

Questions about wrapping an LEVC VN5

How much vinyl does it take to wrap an LEVC VN5?

About 85 ft (26 m) of 60-inch (1.52 m) cast film is needed to wrap an LEVC VN5. That figure covers the five-door van body with its tall roof and sliding side doors. For chrome or patterned film, the estimate rises to about 97 ft (29.5 m) because the material must be matched.

Are the sliding doors of an LEVC VN5 wrapped?

Yes, the sliding doors of an LEVC VN5 are wrapped, but the tracks stay bare. The film is cut along the tracks to prevent peeling and allow the doors to slide freely. Leaving the tracks uncovered is standard for any van with this design.

Can I wrap only the hood or the roof of an LEVC VN5?

Yes, you can wrap only the hood or the roof of an LEVC VN5 as a partial wrap. Other small options are mirror caps, chrome delete for window trim and badges, and paint protection film on the front end. These jobs require less film than a full wrap but still need careful work around the tall roof and door tracks.

Is an LEVC VN5 hard to wrap?

Yes, an LEVC VN5 is harder to wrap than a typical car because of its tall, long body and sliding side doors. The roof sits at 78.3 in (1,990 mm), so it must be wrapped from a platform. The sliding door tracks force extra cutting, and the charge port door is wrapped as a small separate piece.