Wraps by car

Marcos Mantis wrap

The Marcos Mantis wrap page covers the single-generation sports car built from 1997 to 1999. A full Marcos Mantis wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, count on about 46 ft (14 m). The page explains the body work this vinyl wrap involves.

1generations11.5 mof film for a full wrap

Marcos Mantis, first generation, factory photo
Marcos Mantis, first generation. Factory color shown.

Marcos Mantis wrap colors and ideas

  • Mantis black wrap
  • Mantis white wrap
  • Mantis gray wrap
  • Mantis silver wrap
  • Mantis red wrap
  • Mantis blue wrap
  • Mantis green wrap
  • Mantis yellow wrap
  • Mantis orange wrap
  • Mantis purple wrap
  • Mantis pink wrap
  • Mantis teal wrap
  • Mantis brown wrap
  • Mantis gold wrap
  • Mantis chrome wrap
  • Mantis color shift wrap
  • Mantis carbon fiber wrap
  • Mantis camo and patterned wrap

How much vinyl to wrap a Marcos Mantis

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–1999convertible (2 doors)163.8 in (4,160 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Mantis wrap cost factors

Mantis wrap cost depends on the film and the prep work. A full wrap of this 163.8 in (4,160 mm) convertible takes about 38 ft (11.5 m) of 60-inch cast film, or 46 ft (14 m) for chrome or patterned film. The wrap cost also changes with the number of wrapped panels and how much of the car you cover. Because the top is not wrapped, the cost of a full wrap is only for the painted body.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Mantis wraps by generation

Swipe sideways. Tap a card for the full description.

Marcos Mantis, first generation, factory photo
Factory color shown

1997–1999 Mantis convertible (first generation)

1997–1999convertible (2 doors)163.8 in (4,160 mm)

The first generation Marcos Mantis is a two-door convertible built from 1997 to 1999. The fabric top is not wrapped, and the film ends exactly where the top begins. The installer cuts the film cleanly along the roof line so the soft top stays untouched. On this car there is no folding hard top, so no extra roof panels are wrapped.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Mantis

A partial wrap on a Marcos Mantis can cover the hood, mirror caps or rear deck. A chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end is another option for this car. These smaller jobs use less film than a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Marcos Mantis: body, cut-outs and film

A Marcos Mantis vinyl wrap must fit a 163.8 in (4,160 mm) convertible body with two doors. The car is small for a sports car, so a full wrap uses less film than many larger coupes. The open top changes the job because the film has to start and end cleanly at the roof edge. Film on the doors and rear quarters runs right up to that line.

Mantis wrap ideas start with the fact that the fabric top is never wrapped. The film ends exactly where the top begins, so the body color stops at the roof line. You can wrap the hood, trunk, doors and bumpers without touching the top. A chrome delete on the window trim and badges gives the car a cleaner look.

When you figure how much vinyl to wrap a Mantis, you only have one generation to consider. The 1997–1999 convertible is the only body, so the film estimate stays the same for every car. The full wrap takes about 38 ft (11.5 m) of 60-inch film, or 46 ft (14 m) for chrome or patterned film. The short body and two doors keep the total film lower than on a sedan.

Questions about wrapping a Marcos Mantis

How much vinyl does it take to wrap a Marcos Mantis?

Yes, a full wrap of a Marcos Mantis takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the figure is about 46 ft (14 m). The estimate applies to the single body style built from 1997 to 1999.

Is the top of a Mantis wrapped?

No, the top of a Mantis is not wrapped. The fabric top stays bare, and the vinyl ends where the top begins. Installers cut the film along the roof line so the soft top remains untouched.

Can I wrap only the hood or the roof of a Mantis?

Yes, you can wrap only the hood or the rear deck of a Mantis. A partial wrap on this car often covers the hood, mirror caps or rear deck. A chrome delete is another smaller job for the window trim and badges.

Is a Mantis hard to wrap?

Yes, a Mantis is a bit more work to wrap because of the convertible body. The film has to end cleanly where the fabric top begins, so the roof line needs careful cutting. The car is short at 163.8 in (4,160 mm), which keeps the full wrap to about 38 ft (11.5 m) of film.