Wraps by car

Marlin 5EXi wrap

The Marlin 5EXi wrap page covers this sports car from its first generation, which began in 2004 and continues today. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan for about 52 ft (16 m).

1generations13.5 mof film for a full wrap

Marlin 5EXi, first generation, factory photo
Marlin 5EXi, first generation. Factory color shown.

Marlin 5EXi wrap colors and ideas

  • Marlin 5EXi black wrap
  • Marlin 5EXi white wrap
  • Marlin 5EXi gray wrap
  • Marlin 5EXi silver wrap
  • Marlin 5EXi red wrap
  • Marlin 5EXi blue wrap
  • Marlin 5EXi green wrap
  • Marlin 5EXi yellow wrap
  • Marlin 5EXi orange wrap
  • Marlin 5EXi purple wrap
  • Marlin 5EXi pink wrap
  • Marlin 5EXi teal wrap
  • Marlin 5EXi brown wrap
  • Marlin 5EXi gold wrap
  • Marlin 5EXi chrome wrap
  • Marlin 5EXi color shift wrap
  • Marlin 5EXi carbon fiber wrap
  • Marlin 5EXi camo and patterned wrap

How much vinyl to wrap a Marlin 5EXi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–nowconvertible (2 doors)139.8 in (3,550 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Marlin 5EXi wrap cost factors

Marlin 5EXi wrap cost depends on film type, with standard cast film at about 44 ft (13.5 m) and chrome or patterned film at about 52 ft (16 m). The convertible body adds work because you must trim precisely at the roof edge and around the fabric top. Labor also changes if you wrap additional pieces like mirrors or door handles.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Marlin 5EXi wraps by generation

Swipe sideways. Tap a card for the full description.

Marlin 5EXi, first generation, factory photo
Factory color shown

2004–now Marlin 5EXi convertible (first generation)

2004–nowconvertible (2 doors)139.8 in (3,550 mm)

The first generation Marlin 5EXi has an open top, so the fabric top is never wrapped and the film ends where it begins. If the car has a folding hard top, that top is wrapped as panels of its own rather than as part of the main body. Installers cut the film along the roof opening to follow the body lines exactly.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Marlin 5EXi

A partial wrap on the Marlin 5EXi can cover the hood, mirror caps, or rear deck. A Marlin 5EXi chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Marlin 5EXi: body, cut-outs and film

The Marlin 5EXi vinyl wrap fits a convertible body with two doors and a length of 139.8 in (3,550 mm). The compact size keeps film needs moderate, but the open top means the wrap stops where the fabric or folding roof starts. You still wrap the main body panels as you would on a closed car.

Marlin 5EXi wrap ideas start with knowing the convertible body: a fabric top is not wrapped and film ends where it begins. A folding hard top, if fitted, is wrapped as separate panels of its own. You also need to remove or mask trim around the windshield and door handles for clean edges.

How much vinyl to wrap a Marlin 5EXi depends on the single generation in the catalog, produced from 2004 to now. The body style has not changed, so the film estimate stays consistent across production years. You can use the same 44 ft (13.5 m) figure for any Marlin 5EXi.

More Marlin wraps

Questions about wrapping a Marlin 5EXi

How much vinyl does it take to wrap a Marlin 5EXi?

Yes, a full wrap of a Marlin 5EXi takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, the amount rises to about 52 ft (16 m). These figures are for a complete color change wrap on the newest body.

Is the top of a Marlin 5EXi wrapped?

No, the fabric top of a Marlin 5EXi is not wrapped. The vinyl film ends where the fabric top begins, following the roof opening. If the car has a folding hard top, that top is wrapped as panels of its own.

Can I wrap only the hood or the roof of a Marlin 5EXi?

Yes, you can wrap only the hood or the rear deck of a Marlin 5EXi. A partial wrap commonly includes the hood, mirror caps, or rear deck. You can also do a chrome delete on window trim and badges or add clear paint protection film to the front end.

Is a Marlin 5EXi hard to wrap?

The Marlin 5EXi is not especially hard to wrap, but the convertible body adds work at the roof edge. You must trim the film precisely where the fabric top begins, and a folding hard top needs separate panel wrapping. Its length of 139.8 in (3,550 mm) is manageable for one installer.