A Mazda BT-50 wrapped in chrome starts with choosing a chrome finish, then a specific film, then whether to wrap the full body or selected panels. The finish sets the look: a silver chrome looks closest to bare metal, a blue or red chrome adds color, and a satin chrome cuts the reflectivity. Every chrome film has a low-stretch metallic layer, so a BT-50 installer works panel by panel from the roof down. A full color change on the current body takes about 67 ft (20.5 m) of film, or about 76 ft (23 m) for chrome or patterned film.
The factory paint of the Mazda BT-50 is what the chrome wrap sits on, so any paint chip or rust spot must be fixed before the film goes down. Chrome film is the least forgiving over damaged paint, because every bump reads through the metallic surface. Seams are planned along the body lines of the BT-50, including where the cab meets the bed. If a panel has been repainted, a test spot shows whether the surface will hold the film.
Chrome wrap on a Mazda BT-50 is removable, so the factory paint can return to standard when the truck is sold or the lease ends. The film works best with hand wash only, because a pressure washer can lift edges on a pickup with a wrap. Any brush or automated wash will mark chrome film, which shows scratches readily. When you hand wash, a pH-neutral soap and a soft mitt keep the chrome finish clean.

