Wraps by car

Mazda BT-50 wrap

This page covers the Mazda BT-50 wrap across its three generations. The newest body, sold since 2020, needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast vinyl wrap. A full wrap of this pickup truck turns the whole exterior into one new color or finish.

3generations20.5 mof film for a full wrap

Mazda BT-50, third generation, factory photo
Mazda BT-50, third generation. Factory color shown.

Mazda BT-50 wrap colors and ideas

  • Mazda BT-50 black wrap
  • Mazda BT-50 white wrap
  • Mazda BT-50 gray wrap
  • Mazda BT-50 silver wrap
  • Mazda BT-50 red wrap
  • Mazda BT-50 blue wrap
  • Mazda BT-50 green wrap
  • Mazda BT-50 yellow wrap
  • Mazda BT-50 orange wrap
  • Mazda BT-50 purple wrap
  • Mazda BT-50 pink wrap
  • Mazda BT-50 teal wrap
  • Mazda BT-50 brown wrap
  • Mazda BT-50 gold wrap
  • Mazda BT-50 chrome wrap
  • Mazda BT-50 color shift wrap
  • Mazda BT-50 carbon fiber wrap
  • Mazda BT-50 camo and patterned wrap

How much vinyl to wrap a Mazda BT-50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowpickup (4 doors)207.9 in (5,280 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2011–nowpickup (4 doors)201.7 in (5,124 mm) to 211.5 in (5,373 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2006–2012pickup (4 doors)199.8 in (5,075 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Mazda BT-50 wrap cost factors

A Mazda BT-50 wrap cost depends on the film area and the work of taking parts off. The newest body calls for about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, and a chrome or patterned film raises that to about 76 ft (23 m). The pickup bed means the cab and the bed are wrapped as two bodies, which adds labor. The tall roof requires a platform, and older paint may need extra preparation before the film goes on.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (70.3 in (1,785 mm)): the roof is wrapped from a platform.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Mazda BT-50 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda BT-50, third generation, factory photo
Factory color shown

2020–now Mazda BT-50 pickup (third generation)

2020–nowpickup (4 doors)207.9 in (5,280 mm)

The third generation Mazda BT-50 has a pickup bed that splits the wrap into two bodies. The cab and the bed are wrapped as separate sections, and the inside of the bed stays bare. This body, built from 2020 and restyled in 2024, is 207.9 in (5,280 mm) long. Its tall roof means an installer works from a platform to cover the top.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (70.3 in (1,785 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Mazda BT-50, second generation, factory photo
Factory color shown

2011–now Mazda BT-50 pickup (second generation)

2011–nowpickup (4 doors)201.7 in (5,124 mm) to 211.5 in (5,373 mm)

The second generation Mazda BT-50 covers a wide run of years, and its body overlaps with the newer one from 2020 on. If your BT-50 is from those years, you need to check which body it is before ordering film. This generation was built from 2011 and restyled in 2015, with lengths from 201.7 in (5,124 mm) to 211.5 in (5,373 mm). The pickup bed and tall roof remain the key features for wrapping.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (71.7 in (1,821 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Mazda BT-50, first generation, factory photo
Factory color shown

2006–2012 Mazda BT-50 pickup (first generation)

2006–2012pickup (4 doors)199.8 in (5,075 mm)

The first generation Mazda BT-50 is old enough that paint age matters before a wrap. Panels may be original or repainted, so a test spot is done before the full wrap to check adhesion. This body was built from 2006 to 2012 and restyled in 2008, with a length of 199.8 in (5,075 mm). The pickup bed and the tall roof carry the same wrap approach as later generations.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Mazda BT-50

A partial wrap on a Mazda BT-50 can cover the roof, hood, or mirror caps. Chrome delete uses black film on window trim and badges to change the bright trim to a dark finish. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips and scratches. These smaller jobs need less film than a full wrap and can be done on their own.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda BT-50: body, cut-outs and film

The Mazda BT-50 vinyl wrap is shaped by its pickup body style. Every generation has four doors, and the cab and the bed are treated as two separate bodies for film. The inside of the bed stays bare, so you only count the outside surfaces. The newest body is 207.9 in (5,280 mm) long, which sets the panel sizes a wrap installer works with.

Mazda BT-50 wrap ideas start with the pickup bed and the tall roof. The cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The roof is high enough to need a platform, as the body stands around 70 in (1,780 mm) tall. Door handles and badges come off for a clean wrap, and the tailgate needs cut-outs for the handle and camera.

How much vinyl to wrap a Mazda BT-50 depends on the generation you own. The newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, while the second generation needs about 64 ft (19.5 m). The first generation sits in between at about 66 ft (20 m). Choosing a chrome or patterned film adds roughly 9 ft (3 m) to any of these figures.

Questions about wrapping a Mazda BT-50

How much vinyl does it take to wrap a Mazda BT-50?

A full wrap of the newest Mazda BT-50 takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast vinyl wrap. This figure comes from the film estimate for the third generation body, sold since 2020. A chrome or patterned film would need about 76 ft (23 m) instead. The pickup bed and the tall roof are already included in that estimate.

Is the bed of a Mazda BT-50 wrapped?

No, the inside of the bed of a Mazda BT-50 is not wrapped. The cab and the bed are wrapped as two separate bodies, but only their outside surfaces get film. The inside of the bed stays bare, which saves film and keeps the wrap from being damaged by cargo.

Which years of the Mazda BT-50 take the same film cuts?

Each Mazda BT-50 generation has its own film cuts, and the restyling years within a generation do not change them. The third generation runs from 2020, with a restyle in 2024, so all those cars share the same cuts. The second generation spans 2011 with a restyle in 2015, and the first generation goes from 2006 to 2012 with a restyle in 2008.

Can I wrap only the hood or the roof of a Mazda BT-50?

Yes, you can wrap only the hood or the roof of a Mazda BT-50. A partial wrap can cover the roof, hood, or mirror caps on their own. Chrome delete can also be done separately on the window trim and badges. Paint protection film is a clear option for the front end if you want protection without changing the color.