Wraps by car

Mazda 6 wrap

The Mazda 6 wrap page covers the mid-size sedan and wagon across three generations from 2002 to 2024. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on the same car is planned at about 74 ft (22.5 m).

3generations18 mof film for a full wrap

Mazda 6, third generation, factory photo
Mazda 6, third generation. Factory color shown.

Mazda 6 wrap colors and ideas

  • Mazda 6 black wrap
  • Mazda 6 white wrap
  • Mazda 6 gray wrap
  • Mazda 6 silver wrap
  • Mazda 6 red wrap
  • Mazda 6 blue wrap
  • Mazda 6 green wrap
  • Mazda 6 yellow wrap
  • Mazda 6 orange wrap
  • Mazda 6 purple wrap
  • Mazda 6 pink wrap
  • Mazda 6 teal wrap
  • Mazda 6 brown wrap
  • Mazda 6 gold wrap
  • Mazda 6 chrome wrap
  • Mazda 6 color shift wrap
  • Mazda 6 carbon fiber wrap
  • Mazda 6 camo and patterned wrap

How much vinyl to wrap a Mazda 6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2024sedan, wagon (4 or 5 doors)189.2 in (4,805 mm) to 191.7 in (4,870 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
2007–2013liftback, sedan, wagon (4 or 5 doors)187.2 in (4,755 mm) to 188.4 in (4,785 mm)about 52 ft (16 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
2002–2008liftback, sedan, wagon (4 or 5 doors)183.9 in (4,670 mm) to 184.6 in (4,690 mm)about 52 ft (16 m) for the liftback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Mazda 6 wrap cost factors

The Mazda 6 wrap cost depends on the film amount, the body style, and the number of cut-outs. A wagon takes more film than a sedan, and the third generation's length of 189.2 in (4,805 mm) to 191.7 in (4,870 mm) sets the base for the newest cars. Trims with parking sensors, cameras, or a sunroof add time for precision cutting around each part. No two cars are quoted the same because the wrap depends on these details.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2015, 2018: bumpers and lights differ between the versions, and so do the film cuts.

Mazda 6 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda 6, third generation, factory photo
Factory color shown

2012–2024 Mazda 6 sedan, wagon (third generation)

2012–2024sedan, wagon (4 or 5 doors)189.2 in (4,805 mm) to 191.7 in (4,870 mm)

The third generation Mazda 6 was restyled in 2015 and 2018, changing the bumpers and lights. Film cut for one version of this body does not fit another version from a different restyling year. An installer checks which bumper and light shape the car carries before cutting panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Mazda 6, second generation, factory photo
Factory color shown

2007–2013 Mazda 6 liftback, sedan, wagon (second generation)

2007–2013liftback, sedan, wagon (4 or 5 doors)187.2 in (4,755 mm) to 188.4 in (4,785 mm)

The second generation Mazda 6 ran from 2007 to 2013, but its last two years overlap with the third generation. A car built in 2012 or 2013 may be either the GH body or the newer GJ/GL body. The owner checks the body code on the car's plate to know which film cuts fit.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Mazda 6, first generation, factory photo
Factory color shown

2002–2008 Mazda 6 liftback, sedan, wagon (first generation)

2002–2008liftback, sedan, wagon (4 or 5 doors)183.9 in (4,670 mm) to 184.6 in (4,690 mm)

The first generation Mazda 6 from 2002 to 2008 often has paint that is original or has been repainted. A repainted panel may not hold film the same way as factory paint, so a test spot is done before a full wrap. This step shows how the film behaves on the older surface.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Film: about 52 ft (16 m) for the liftback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Mazda 6

A partial wrap on a Mazda 6 can be the roof, the hood, or the mirror caps in any film. Chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda 6: body, cut-outs and film

The Mazda 6 vinyl wrap is planned around the body style and its length. The newest cars measure from 189.2 in (4,805 mm) to 191.7 in (4,870 mm), and the wagon needs more film than the sedan. Older generations are shorter, from 183.9 in (4,670 mm) to 188.4 in (4,785 mm). A five-door or liftback rear adds another panel to wrap.

Mazda 6 wrap ideas include working around the fog lamps that sit in the front bumper on every trim. The bumper film gets a cut-out for each lamp, and some trims also have parking sensors that need the film cut around each sensor. A sunroof panel is cut around its opening on the trims that have one. Cameras in the body, where fitted, need the film cut around each lens.

How much vinyl to wrap a Mazda 6 depends on the generation and body style. The third generation takes about 59 ft (18 m) for a full wrap, while the second generation takes about 52 ft (16 m) for the sedan to 62 ft (19 m) for the wagon. The first generation liftback is planned at about 52 ft (16 m) and the wagon at 56 ft (17 m). Chrome or patterned film always needs more material, up to about 74 ft (22.5 m) on newer cars.

Questions about wrapping a Mazda 6

How much vinyl does it take to wrap a Mazda 6?

A full vinyl wrap of the newest Mazda 6 takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on the same body is planned at about 74 ft (22.5 m). Older generations use less film, from about 52 ft (16 m) to 62 ft (19 m) depending on the body style.

Can the roof of a Mazda 6 be wrapped?

Yes, the roof of a Mazda 6 can be wrapped as a partial job. The roof film is cut around the sunroof opening on the trims that have a sunroof. A roof wrap is one of the smaller jobs that changes the car's look without wrapping the whole body.

Which years of the Mazda 6 take the same film cuts?

The years of the Mazda 6 that take the same film cuts are divided by generation and restyling. The first generation from 2002 to 2005 takes one set, and the 2005 restyle takes another. The second generation from 2007 to 2010 and the 2010 restyle are two more sets. The third generation has three sets: 2012 to 2015, 2015 to 2018, and 2018 to 2024.

Which Mazda 6 body takes more film?

The wagon body takes more film than the sedan or liftback in every generation of the Mazda 6. In the third generation the wagon plans for about 59 ft (18 m), and in the second generation the wagon uses about 62 ft (19 m). The first generation wagon takes about 56 ft (17 m) while the liftback takes about 52 ft (16 m).