Wraps by car

Mazda MX-30 wrap

This page covers the Mazda MX-30 wrap in detail, from vinyl wrap amounts to panel preparation. The Mazda MX-30 is produced in one generation from 2020 onward. A full wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

Mazda MX-30, first generation, factory photo
Mazda MX-30, first generation. Factory color shown.

Mazda MX-30 wrap colors and ideas

  • Mazda MX-30 black wrap
  • Mazda MX-30 white wrap
  • Mazda MX-30 gray wrap
  • Mazda MX-30 silver wrap
  • Mazda MX-30 red wrap
  • Mazda MX-30 blue wrap
  • Mazda MX-30 green wrap
  • Mazda MX-30 yellow wrap
  • Mazda MX-30 orange wrap
  • Mazda MX-30 purple wrap
  • Mazda MX-30 pink wrap
  • Mazda MX-30 teal wrap
  • Mazda MX-30 brown wrap
  • Mazda MX-30 gold wrap
  • Mazda MX-30 chrome wrap
  • Mazda MX-30 color shift wrap
  • Mazda MX-30 carbon fiber wrap
  • Mazda MX-30 camo and patterned wrap

How much vinyl to wrap a Mazda MX-30

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)173.0 in (4,395 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Mazda MX-30 wrap cost factors

The Mazda MX-30 wrap cost depends on film type, panel count, and the amount of labor for cut-outs. Chrome or patterned film adds about 67 ft (20.5 m) because the pattern must be matched. A full wrap on this 173.0 in (4,395 mm) SUV takes more time than a partial job.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Mazda MX-30 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda MX-30, first generation, factory photo
Factory color shown

2020–now Mazda MX-30 SUV (first generation)

2020–nowSUV (5 doors)173.0 in (4,395 mm)

The first generation Mazda MX-30 is an SUV with five doors and a length of 173.0 in (4,395 mm). This body style has a large tailgate and tall bumpers, so a full wrap needs careful film planning. The total film for a solid color is about 57 ft (17.5 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Mazda MX-30

A Mazda MX-30 partial wrap can cover the roof, hood, or mirror caps. Chrome delete is a job where the window trim and badges are covered with black film. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda MX-30: body, cut-outs and film

The Mazda MX-30 vinyl wrap covers an SUV body with five doors that measures 173.0 in (4,395 mm) in length. The tall sides and large tailgate add surface area compared with a sedan. Installers plan the wrap in sections for the roof, hood, doors, fenders, and bumpers.

Mazda MX-30 wrap ideas start with the tailgate, where the rear glass sits in the panel and the film ends at its edge. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. The charge port door on plug-in and electric versions is wrapped as a small piece of its own.

To know how much vinyl to wrap a Mazda MX-30, check the generation because only one exists. The first generation uses the same body length and style for all years. The film estimate stays near 57 ft (17.5 m) for a full color change wrap.

Questions about wrapping a Mazda MX-30

How much vinyl does it take to wrap a Mazda MX-30?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Mazda MX-30. This figure is for the newest body style, which is an SUV with five doors. Chrome or patterned film raises the amount to about 67 ft (20.5 m).

Can I wrap only the hood or the roof of a Mazda MX-30?

Yes, you can wrap only the hood or the roof of a Mazda MX-30. A partial wrap on this car often covers the roof, hood, or mirror caps. Paint protection film (PPF) is another option for the front end only.

Is a Mazda MX-30 hard to wrap?

A Mazda MX-30 adds some work because the tailgate has rear glass set into the panel. The film must end neatly at the edge of that glass. Every trim has parking sensors in the bumpers, and each sensor needs a cut-out in the film.

How many generations of the Mazda MX-30 does this page cover?

This page covers one generation of the Mazda MX-30. That generation runs from 2020 to the present.