Wraps by car

Mazda Flair wrap

The Mazda Flair wrap guide covers both generations of this tall minivan. A vinyl wrap on the newest Flair body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film raises the estimate to about 57 ft (17.5 m). The catalog includes the first generation from 2012 and the second generation still in production.

2generations15 mof film for a full wrap

Mazda Flair, second generation, factory photo
Mazda Flair, second generation. Factory color shown.

Mazda Flair wrap colors and ideas

  • Flair black wrap
  • Flair white wrap
  • Flair gray wrap
  • Flair silver wrap
  • Flair red wrap
  • Flair blue wrap
  • Flair green wrap
  • Flair yellow wrap
  • Flair orange wrap
  • Flair purple wrap
  • Flair pink wrap
  • Flair teal wrap
  • Flair brown wrap
  • Flair gold wrap
  • Flair chrome wrap
  • Flair color shift wrap
  • Flair carbon fiber wrap
  • Flair camo and patterned wrap

How much vinyl to wrap a Mazda Flair

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowvan (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2012–2017van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Flair wrap cost factors

Flair wrap cost depends on the size of the minivan and the film chosen. A full wrap of the 133.7 in (3,395 mm) body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft (2.5 m) to the estimate. Labor is also set by the sliding door tracks and the number of cut-outs.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Flair wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Flair, second generation, factory photo
Factory color shown

2017–now Flair van (second generation)

2017–nowvan (5 doors)133.7 in (3,395 mm)

The second generation Mazda Flair is wrapped with attention to the sliding side doors. The door tracks stay bare and decide where the film is cut along each side. A full wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The van has been produced from 2017 to the present, so most examples are recent.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mazda Flair, first generation, factory photo
Factory color shown

2012–2017 Flair van (first generation)

2012–2017van (5 doors)133.7 in (3,395 mm)

The first generation Mazda Flair from 2012 to 2017 calls for a paint check before wrapping. Panels on a car of these years may be original or repainted, and a test spot comes before a full wrap. The van was restyled in 2014 but kept the same 133.7 in (3,395 mm) length. It uses the same film estimate as the newer generation.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Flair

Partial wrap jobs on the Mazda Flair include the roof, hood and mirror caps. A Flair chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear shield. These smaller jobs use less film than a full wrap and still change the look of the van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda Flair: body, cut-outs and film

A Mazda Flair vinyl wrap starts from a compact van body with five doors and sliding rear sides. The minivan measures 133.7 in (3,395 mm) long, so a full wrap is a midsize job for one installer. The high roof and vertical sides add film area but keep the panels easy to reach. The sliding door tracks are the main feature that changes the wrap plan.

Flair wrap ideas have to work around the sliding side doors and their tracks. The door tracks stay bare, and the film is cut along them on both sides of the van. The door handles, mirrors and badges come off for a clean color change wrap. The front and rear bumpers can stay on the van while they are wrapped.

How much vinyl to wrap a Flair depends on the generation, but the two are the same size. Both the first and second generation measure 133.7 in (3,395 mm) long and use about 49 ft (15 m) of 60-inch (1.52 m) cast film. A wrap with chrome or patterned film takes about 57 ft (17.5 m). The 2014 restyle of the first generation changed only details, not the amount of film.

Questions about wrapping a Mazda Flair

How much vinyl does it take to wrap a Mazda Flair?

A Mazda Flair takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. That figure is based on the newest body, and both generations are the same size. If the wrap uses chrome or patterned film, the estimate rises to about 57 ft (17.5 m).

Are the sliding doors of a Flair wrapped?

The sliding doors of a Flair are wrapped, but their tracks are not. The film is cut along the door tracks, which stay bare. This gives a clean edge and lets the doors slide without rubbing the vinyl.

Can I wrap only the hood or the roof of a Flair?

Yes, you can wrap only the hood or the roof of a Flair. A partial wrap on this van often includes the roof, hood and mirror caps. A chrome delete of the window trim and badges is another smaller option.

Is a Flair hard to wrap?

A Flair is not a hard wrap, but the sliding doors add work. The door tracks must stay bare and the film is cut along them. The van is 133.7 in (3,395 mm) long, so a full wrap is a typical minivan job.