Wraps by car

Mazda Flair Crossover wrap

A Mazda Flair Crossover wrap covers the full body of the van, which is now in its first generation. Mazda lists one generation from 2014 to the present, so the wrap design matches the current tall body. A full wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. A vinyl wrap gives the van a new color or a printed design in one piece.

1generations15 mof film for a full wrap

Mazda Flair Crossover, first generation, factory photo
Mazda Flair Crossover, first generation. Factory color shown.

Mazda Flair Crossover wrap colors and ideas

  • Flair Crossover black wrap
  • Flair Crossover white wrap
  • Flair Crossover gray wrap
  • Flair Crossover silver wrap
  • Flair Crossover red wrap
  • Flair Crossover blue wrap
  • Flair Crossover green wrap
  • Flair Crossover yellow wrap
  • Flair Crossover orange wrap
  • Flair Crossover purple wrap
  • Flair Crossover pink wrap
  • Flair Crossover teal wrap
  • Flair Crossover brown wrap
  • Flair Crossover gold wrap
  • Flair Crossover chrome wrap
  • Flair Crossover color shift wrap
  • Flair Crossover carbon fiber wrap
  • Flair Crossover camo and patterned wrap

How much vinyl to wrap a Mazda Flair Crossover

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowvan (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Flair Crossover wrap cost factors

A Flair Crossover wrap cost depends on the film choice, the amount of disassembly, and the condition of the paint. A full wrap uses about 49 ft (15 m) of film for a plain color or about 57 ft (17.5 m) for chrome or patterned film. The sliding door tracks add labor because the film must be cut cleanly around them. Removing and reinstalling trim pieces also adds to the total work.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Flair Crossover wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Flair Crossover, first generation, factory photo
Factory color shown

2014–now Flair Crossover van (first generation)

2014–nowvan (5 doors)133.7 in (3,395 mm)

The first generation Mazda Flair Crossover, made from 2014 to now, has sliding side doors that affect the wrap layout. The door tracks stay bare, and the film is cut along them so the doors can open without rubbing. A full wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) for chrome or patterned film. The van is 133.7 in (3,395 mm) long, which is a compact size for a minivan.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Flair Crossover

A partial wrap on a Flair Crossover can cover the roof, hood, or mirror caps without changing the whole van. A chrome delete turns the window trim and badges black, which changes the look without a full color change. Paint protection film (PPF) is a clear film that can be applied to the front end to guard against stone chips. These smaller jobs use less film and can be done without removing the sliding doors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda Flair Crossover: body, cut-outs and film

A Mazda Flair Crossover vinyl wrap has to follow the tall van body and the sliding side doors. The van is 133.7 in (3,395 mm) long and comes only as a 5-door van. The vertical sides and tall roof use more film than a lower car of the same length. A full wrap covers all painted panels, but the installers cut around the moving parts.

Flair Crossover wrap ideas start with the sliding side doors, because the door tracks stay bare. The film is cut along the tracks so the doors can still slide without catching. The door handles and mirrors can be wrapped separately or left in the original color. A two-tone design can use the track lines as a natural break between colors.

How much vinyl to wrap a Flair Crossover depends on whether you choose a plain or patterned film. The standard estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film needs about 57 ft (17.5 m), because the pattern has to be matched at the seams. The single generation of this van means the film estimate stays the same for every year.

Questions about wrapping a Mazda Flair Crossover

How much vinyl does it take to wrap a Mazda Flair Crossover?

A full wrap of a Mazda Flair Crossover takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate goes up to about 57 ft (17.5 m). The extra film is needed to match patterns at the seams and around the sliding door tracks.

Are the sliding doors of a Flair Crossover wrapped?

The sliding doors of a Flair Crossover are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still slide without catching. This is a standard part of the wrap installation on this van.

Can I wrap only the hood or the roof of a Flair Crossover?

You can wrap only the hood or the roof of a Flair Crossover. A partial wrap can cover the roof, hood, or mirror caps, and you can also get a chrome delete or paint protection film on the front end. These smaller jobs are a good way to change one part of the van without a full wrap.

Is a Flair Crossover hard to wrap?

A Flair Crossover is not the hardest van to wrap, but the sliding side doors add extra work. The door tracks stay bare, so the installer must cut the film carefully along them. The tall body and 133.7 in (3,395 mm) length mean a full wrap uses about 49 ft (15 m) of film, which takes time to apply smoothly.