Wraps by car

Mazda Flair Wagon wrap

The Mazda Flair Wagon wrap page covers all three generations of this minivan, from 2012 to the present day. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 57 ft (17.5 m) instead.

3generations15.5 mof film for a full wrap

Mazda Flair Wagon, third generation, factory photo
Mazda Flair Wagon, third generation. Factory color shown.

Mazda Flair Wagon wrap colors and ideas

  • Flair Wagon black wrap
  • Flair Wagon white wrap
  • Flair Wagon gray wrap
  • Flair Wagon silver wrap
  • Flair Wagon red wrap
  • Flair Wagon blue wrap
  • Flair Wagon green wrap
  • Flair Wagon yellow wrap
  • Flair Wagon orange wrap
  • Flair Wagon purple wrap
  • Flair Wagon pink wrap
  • Flair Wagon teal wrap
  • Flair Wagon brown wrap
  • Flair Wagon gold wrap
  • Flair Wagon chrome wrap
  • Flair Wagon color shift wrap
  • Flair Wagon carbon fiber wrap
  • Flair Wagon camo and patterned wrap

How much vinyl to wrap a Mazda Flair Wagon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowvan (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2013–2018van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2012–2013van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Flair Wagon wrap cost factors

The Flair Wagon wrap cost depends on film type, body coverage, and the prep work this minivan needs. Cast film is the standard for a full color change, while chrome or patterned film adds about 6 ft (1.8 m) to the material estimate. A tall roof and sliding door tracks add labor compared to a small hatchback. Partial jobs like a roof wrap or chrome delete use less material and take less time than a full wrap.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.3 in (1,785 mm)): the roof is wrapped from a platform.

Flair Wagon wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Flair Wagon, third generation, factory photo
Factory color shown

2017–now Flair Wagon van (third generation)

2017–nowvan (5 doors)133.7 in (3,395 mm)

The third-generation Mazda Flair Wagon, built from 2017 onward, has sliding side doors whose tracks stay bare during a wrap. The film is cut precisely along the track lines so the doors can still open and close freely. Because the body is 70.3 in (1,785 mm) tall, the roof is wrapped from a platform for a smooth finish. This generation is the newest body in the catalog and the basis for the film estimates.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.3 in (1,785 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mazda Flair Wagon, second generation, factory photo
Factory color shown

2013–2018 Flair Wagon van (second generation)

2013–2018van (5 doors)133.7 in (3,395 mm)

The second-generation Mazda Flair Wagon was produced from 2013 to 2018, and its years overlap with the third generation between 2017 and 2018. If your car is from those overlapping years, you need to check which body style you have before ordering film. The length and film requirements are the same as the newer body, so the wrap process is very similar. This generation also has sliding side doors that require careful cutting around the tracks.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mazda Flair Wagon, first generation, factory photo
Factory color shown

2012–2013 Flair Wagon van (first generation)

2012–2013van (5 doors)133.7 in (3,395 mm)

The first-generation Mazda Flair Wagon, made from 2012 to 2013, is now over a decade old, so paint age matters before a wrap. Panels may be original or repainted, and a test spot of film shows whether the surface is sound. On this generation, the sliding door tracks stay bare and the film is cut along them. The body length of 133.7 in (3,395 mm) means you need about 51 ft (15.5 m) of film for a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Flair Wagon

A partial wrap on a Mazda Flair Wagon can cover the roof, hood, or mirror caps for a subtle change. A chrome delete covers the window trim and badges with black film to change the look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs leave the sliding doors and most of the body unpainted.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda Flair Wagon: body, cut-outs and film

A Mazda Flair Wagon vinyl wrap has to handle a very square minivan body with five doors and sliding side panels. The van is 133.7 in (3,395 mm) long, and the newest generation stands 70.3 in (1,785 mm) tall, so the roof is wrapped from a platform. The simple, flat panels make for efficient film use and clean seams. The sliding doors require careful cutting along the tracks so the film does not interfere with operation.

For Flair Wagon wrap ideas, focus on the areas that need cut-outs or removal during installation. The sliding side door tracks stay bare, and the film is cut along them for a factory look. Door handles and mirrors come off to wrap behind the edges properly. The tall roof means installers work from a platform to avoid stretching the film unevenly.

When you calculate how much vinyl to wrap a Flair Wagon, the three generations are nearly identical because the body length stayed at 133.7 in (3,395 mm) across all years. The first generation, produced from 2012 to 2013, shares the same basic shape with the second and third generations. The second generation was restyled in 2015, but the changes do not alter the film estimate. All three use the same amount of film, about 51 ft (15.5 m) for a full wrap.

Questions about wrapping a Mazda Flair Wagon

How much vinyl does it take to wrap a Mazda Flair Wagon?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Mazda Flair Wagon. If you choose chrome or patterned film, plan for about 57 ft (17.5 m). This estimate is based on the newest body, which is 133.7 in (3,395 mm) long.

Are the sliding doors of a Flair Wagon wrapped?

Yes, the sliding doors of a Flair Wagon are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can slide without catching. This is a standard part of a full wrap on this minivan.

Can I wrap only the hood or the roof of a Flair Wagon?

Yes, you can wrap only the hood or the roof of a Flair Wagon. A partial wrap can include the roof, hood, or mirror caps. You can also choose a chrome delete for the window trim and badges or clear paint protection film for the front end.

Is a Flair Wagon hard to wrap?

A Flair Wagon is not especially hard to wrap, but a few features add work compared to a small car. The tall body, 70.3 in (1,785 mm) on the newest generation, means the roof is wrapped from a platform. The sliding side door tracks must be cut precisely so the film does not interfere with the doors. These steps require care but are routine for an experienced installer.