Wraps by car

Mazda CX-3 wrap

The Mazda CX-3 wrap is a full vinyl wrap for the first-generation SUV produced from 2014 to now. This page covers the film needed for the five-door body and the work its panels require. You will need about 56 ft (17 m) of 60-inch (1.52 m) cast film for a complete color change wrap.

1generations17 mof film for a full wrap

Mazda CX-3, first generation, factory photo
Mazda CX-3, first generation. Factory color shown.

Mazda CX-3 wrap colors and ideas

  • Mazda CX-3 black wrap
  • Mazda CX-3 white wrap
  • Mazda CX-3 gray wrap
  • Mazda CX-3 silver wrap
  • Mazda CX-3 red wrap
  • Mazda CX-3 blue wrap
  • Mazda CX-3 green wrap
  • Mazda CX-3 yellow wrap
  • Mazda CX-3 orange wrap
  • Mazda CX-3 purple wrap
  • Mazda CX-3 pink wrap
  • Mazda CX-3 teal wrap
  • Mazda CX-3 brown wrap
  • Mazda CX-3 gold wrap
  • Mazda CX-3 chrome wrap
  • Mazda CX-3 color shift wrap
  • Mazda CX-3 carbon fiber wrap
  • Mazda CX-3 camo and patterned wrap

How much vinyl to wrap a Mazda CX-3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowSUV (5 doors)168.3 in (4,275 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Mazda CX-3 wrap cost factors

The Mazda CX-3 wrap cost depends on the amount of film and the labor for its specific panels. A full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 66 ft (20 m). The number of cut-outs for cameras and fog lamps also affects the time.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Mazda CX-3 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda CX-3, first generation, factory photo
Factory color shown

2014–now Mazda CX-3 SUV (first generation)

2014–nowSUV (5 doors)168.3 in (4,275 mm)

The first generation of the Mazda CX-3 runs from 2014 to the present and received a restyling in 2019. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. The body length remained 168.3 in (4,275 mm) throughout.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Mazda CX-3

A partial wrap on a Mazda CX-3 can cover the roof, hood, or mirror caps. A chrome delete turns the window trim and badges black. Paint protection film (PPF) is a clear film applied to the front end to protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda CX-3: body, cut-outs and film

A Mazda CX-3 vinyl wrap covers a body that is 168.3 in (4,275 mm) long. The five-door SUV shape has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The size and panel count are close to other small SUVs, which keeps the film estimate near 56 ft (17 m).

Mazda CX-3 wrap ideas start with removing or cutting around cameras on some trims. Every trim has fog lamps in the front bumper, so the installer cuts the film around each lens. The tailgate requires a precise trim line where the film meets the glass.

If you want to know how much vinyl to wrap a Mazda CX-3, the first generation is the only body listed in the catalog. The 2019 restyling changed the bumpers and lights, so film kits for earlier and later versions are not interchangeable. The overall length stayed the same, which keeps the material estimate unchanged.

Questions about wrapping a Mazda CX-3

How much vinyl does it take to wrap a Mazda CX-3?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Mazda CX-3. That figure covers a full color change wrap on the newest body. If you use chrome or patterned film, the estimate rises to about 66 ft (20 m).

Which years of the Mazda CX-3 take the same film cuts?

The Mazda CX-3 has one generation, produced from 2014 to the present. The 2019 restyling changed the bumpers and lights, so film cuts from before and after that year are different. For exact fit, you need a pattern matching the production version.

Can I wrap only the hood or the roof of a Mazda CX-3?

Yes, you can wrap only the hood or the roof of a Mazda CX-3. A partial wrap is an option that covers selected panels like the roof, hood, or mirror caps. That uses less material than a full wrap.

Is a Mazda CX-3 hard to wrap?

A Mazda CX-3 is not hard to wrap, but a few details add work. Some trims have cameras in the body, so the film must be cut around each lens. Every trim has fog lamps in the front bumper, requiring cut-outs in the bumper film.