Wraps by car

Mazda CX-9 wrap

The Mazda CX-9 wrap page covers the two generations of this midsize SUV and the film a full wrap needs. A wrap of the newest body uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film raises the estimate to about 79 ft (24 m). The page explains where that film goes, what to remove, and what smaller jobs are possible.

2generations20.5 mof film for a full wrap

Mazda CX-9, second generation, factory photo
Mazda CX-9, second generation. Factory color shown.

Mazda CX-9 wrap colors and ideas

  • Mazda CX-9 black wrap
  • Mazda CX-9 white wrap
  • Mazda CX-9 gray wrap
  • Mazda CX-9 silver wrap
  • Mazda CX-9 red wrap
  • Mazda CX-9 blue wrap
  • Mazda CX-9 green wrap
  • Mazda CX-9 yellow wrap
  • Mazda CX-9 orange wrap
  • Mazda CX-9 purple wrap
  • Mazda CX-9 pink wrap
  • Mazda CX-9 teal wrap
  • Mazda CX-9 brown wrap
  • Mazda CX-9 gold wrap
  • Mazda CX-9 chrome wrap
  • Mazda CX-9 color shift wrap
  • Mazda CX-9 carbon fiber wrap
  • Mazda CX-9 camo and patterned wrap

How much vinyl to wrap a Mazda CX-9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowSUV (5 doors)199.8 in (5,075 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
2006–2015SUV (5 doors)198.7 in (5,047 mm) to 200.6 in (5,096 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Mazda CX-9 wrap cost factors

Mazda CX-9 wrap cost depends on the film chosen, the wrap shop's labor, and the condition of the body. A solid color wrap uses about 67 ft (20.5 m) of cast film, while chrome or patterned film uses about 79 ft (24 m) and costs more per foot. Removing a roof rack or bright moldings on some trims adds time to the job. A first-generation car with older paint may need more prep work before the film goes on.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Mazda CX-9 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda CX-9, second generation, factory photo
Factory color shown

2015–now Mazda CX-9 SUV (second generation)

2015–nowSUV (5 doors)199.8 in (5,075 mm)

The second-generation Mazda CX-9 was restyled for 2020, and the bumpers and lights changed. Film cut for the 2015–2019 version does not fit the 2020 and later version. If you buy a pre-cut kit, order the cuts that match the production year of the car. A shop that cuts on the car can adjust for either version.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Mazda CX-9, first generation, factory photo
Factory color shown

2006–2015 Mazda CX-9 SUV (first generation)

2006–2015SUV (5 doors)198.7 in (5,047 mm) to 200.6 in (5,096 mm)

On a first-generation Mazda CX-9, paint age matters before a full wrap. Panels of these years may be original or repainted, and adhesion differs between the two. A test spot on each panel shows whether the old paint will hold the film. A wrap on failing paint will lift the paint when the film is removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Mazda CX-9

A partial wrap on a Mazda CX-9 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim, decorative moldings, and badges with black film. Paint protection film is a clear film applied to the front end to guard against stone chips. These jobs use less film and take less time than a full color change.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda CX-9: body, cut-outs and film

A Mazda CX-9 vinyl wrap covers a large five-door SUV, so a full color change is a full-day job with two installers. The second generation is 199.8 in (5,075 mm) long, and the first generation spans 198.7 in (5,047 mm) to 200.6 in (5,096 mm) depending on the bumper version. The tall body and long roof make cutting and laying the film easier than on a small car with tight curves. The tailgate and the deep front bumper still need the most time to wrap cleanly.

Mazda CX-9 wrap ideas start with the parts that need cut-outs or removal on this SUV. Every trim has fog lamps in the front bumper, so the bumper film gets a cut-out around each lamp. The tailgate has the rear glass in it, and the film ends at the edge of the glass. Some trims also have parking sensors or cameras in the body, and each sensor or lens needs its own cut-out. Bright decorative moldings on every trim stay bright next to the film unless a chrome delete covers them.

How much vinyl to wrap a Mazda CX-9 depends on the generation and the film type you choose. A solid color wrap of either generation takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 79 ft (24 m) because the pattern has to line up across panels. The first generation changed bumpers in 2009 and again in 2012, so the same film amount still applies but the cut patterns differ.

Questions about wrapping a Mazda CX-9

How much vinyl does it take to wrap a Mazda CX-9?

Yes, a Mazda CX-9 wraps with about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. If the film is chrome or has a pattern, the estimate rises to about 79 ft (24 m). This is for a full wrap of the newest body, in a solid color, with no extra material for mistakes.

Can the roof of a Mazda CX-9 be wrapped?

Yes, the roof of a Mazda CX-9 can be wrapped on its own. Some trims have a sunroof, and the roof film is cut around its opening. The roof is a good partial wrap choice because it is a large flat panel.

Which years of the Mazda CX-9 take the same film cuts?

The second generation Mazda CX-9 takes the same film cuts from 2015 to 2019, and a different set from 2020 onward. The first generation takes one set for 2006–2009, another for 2009–2012, and a third for 2012–2015. The restyling years changed the bumpers and lights, which changes the cut patterns.

Can I wrap only the hood or the roof of a Mazda CX-9?

Yes, you can wrap only the hood or the roof of a Mazda CX-9. A partial wrap can also cover the mirror caps, or you can choose a chrome delete for the window trim, moldings, and badges. Paint protection film is another option that covers just the front end.