Wraps by car

Mazda CX-50 wrap

The Mazda CX-50 wrap guide covers the current generation of this mid-size SUV, produced from 2021 to now with five doors. A full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 59 ft (18 m). This page explains what the body, the glass roof and the trims mean for a wrap job.

1generations16 mof film for a full wrap

Mazda CX-50, first generation, factory photo
Mazda CX-50, first generation. Factory color shown.

Mazda CX-50 wrap colors and ideas

  • Mazda CX-50 black wrap
  • Mazda CX-50 white wrap
  • Mazda CX-50 gray wrap
  • Mazda CX-50 silver wrap
  • Mazda CX-50 red wrap
  • Mazda CX-50 blue wrap
  • Mazda CX-50 green wrap
  • Mazda CX-50 yellow wrap
  • Mazda CX-50 orange wrap
  • Mazda CX-50 purple wrap
  • Mazda CX-50 pink wrap
  • Mazda CX-50 teal wrap
  • Mazda CX-50 brown wrap
  • Mazda CX-50 gold wrap
  • Mazda CX-50 chrome wrap
  • Mazda CX-50 color shift wrap
  • Mazda CX-50 carbon fiber wrap
  • Mazda CX-50 camo and patterned wrap

How much vinyl to wrap a Mazda CX-50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)181.9 in (4,620 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Mazda CX-50 wrap cost factors

Mazda CX-50 wrap cost depends on the amount of film, the labor for its size, and the parts that need extra time. A full wrap uses about 52 ft (16 m) of film, and the panoramic roof, cameras and sunroof opening all add trimming time. The cost also changes with the film type: a cast color change wrap is different from a chrome delete or clear paint protection film.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has cameras in the body: the film is cut around each lens.

Mazda CX-50 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda CX-50, first generation, factory photo
Factory color shown

2021–now Mazda CX-50 SUV (first generation)

2021–nowSUV (5 doors)181.9 in (4,620 mm)

The first generation Mazda CX-50 has a glass roof that is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, and the roof piece is only the painted strip around the glass. This means you do not pay for film on the whole roof panel, only for the film that covers the metal.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Mazda CX-50

For a Mazda CX-50 partial wrap, you can cover the hood, mirror caps and tailgate, which changes the look without a full wrap. A chrome delete covers the window trim and badges with black film, a job done on this car with its dark trim. Paint protection film (PPF) is a clear film on the front end, often on the hood and bumper, to protect the paint from stone chips.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda CX-50: body, cut-outs and film

The Mazda CX-50 vinyl wrap has to cover a body that is 181.9 in (4,620 mm) long, and only one body style exists: an SUV with five doors. A car this size uses more film than a compact, and the high tailgate adds vertical surface. The five-door shape means four door skins, the tailgate and the full roof are all wrapped in one piece each.

Mazda CX-50 wrap ideas start with the parts that need cut-outs or come off: film ends at the edge of the tailgate glass, the roof is cut around the sunroof opening, and every camera lens is trimmed out. The panoramic glass roof is not wrapped, so the film ends at the roof rails. Installing a wrap on this car means removing the door handles and mirror caps for clean edges.

How much vinyl to wrap a Mazda CX-50 is the same for every year, because only the first generation exists from 2021 to now. A wrapper counts about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full color change. Chrome or patterned film needs about 59 ft (18 m), since those films are often cut in smaller pieces to match patterns.

Questions about wrapping a Mazda CX-50

How much vinyl does it take to wrap a Mazda CX-50?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Mazda CX-50. If the film has a chrome or patterned finish, about 59 ft (18 m) is needed because of matching cuts. The estimate is for the newest body, which is the only generation listed.

Can the roof of a Mazda CX-50 be wrapped?

No, the roof of a Mazda CX-50 cannot be fully wrapped because every trim has a panoramic glass roof, and the film ends at the roof rails. The painted strip around the glass can be wrapped, but the glass itself is never covered. The roof stays dark from the glass, whatever the color of the film.

Can I wrap only the hood or the roof of a Mazda CX-50?

Yes, you can wrap only the hood or the roof of a Mazda CX-50 as a partial wrap. The hood, mirror caps and tailgate are the common small jobs, while the roof can be wrapped only on the painted strip around the glass. A chrome delete on the window trim and badges is another partial option.

Is a Mazda CX-50 hard to wrap?

A Mazda CX-50 is not the hardest car to wrap, but it has several parts that add work. The panoramic glass roof means the film ends at the roof rails, every camera lens needs a cut-out, and the sunroof opening is trimmed by hand. The body is also 181.9 in (4,620 mm) long, so each side uses a long piece of film.