Wraps by car

Mazda EZ-6 wrap

The Mazda EZ-6 wrap guide covers the first generation of this mid-size sedan, produced from 2024 to now. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. This page explains the film needed, the parts that require extra work, and the options for partial coverage. It is written for owners who want to plan a wrap without visiting a shop.

1generations18.5 mof film for a full wrap

Mazda EZ-6, first generation, factory photo
Mazda EZ-6, first generation. Factory color shown.

Mazda EZ-6 wrap colors and ideas

  • Mazda EZ-6 black wrap
  • Mazda EZ-6 white wrap
  • Mazda EZ-6 gray wrap
  • Mazda EZ-6 silver wrap
  • Mazda EZ-6 red wrap
  • Mazda EZ-6 blue wrap
  • Mazda EZ-6 green wrap
  • Mazda EZ-6 yellow wrap
  • Mazda EZ-6 orange wrap
  • Mazda EZ-6 purple wrap
  • Mazda EZ-6 pink wrap
  • Mazda EZ-6 teal wrap
  • Mazda EZ-6 brown wrap
  • Mazda EZ-6 gold wrap
  • Mazda EZ-6 chrome wrap
  • Mazda EZ-6 color shift wrap
  • Mazda EZ-6 carbon fiber wrap
  • Mazda EZ-6 camo and patterned wrap

How much vinyl to wrap a Mazda EZ-6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowsedan (4 doors)193.7 in (4,921 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Mazda EZ-6 wrap cost factors

Mazda EZ-6 wrap cost depends on the size of the car, the film choice, and the amount of disassembly. The body is 193.7 in (4,921 mm) long, so a full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 70 ft (21.5 m) because the pattern must be aligned. Removing the door handles, badges, and charge port door adds labor time.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Mazda EZ-6 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda EZ-6, first generation, factory photo
Factory color shown

2024–now Mazda EZ-6 sedan (first generation)

2024–nowsedan (4 doors)193.7 in (4,921 mm)

The first generation Mazda EZ-6 has a four-door sedan body and a length of 193.7 in (4,921 mm). The roof and hood are large single panels, while the trunk lid and doors are medium-sized pieces. The front and rear bumpers are the most complex panels because of their curves and air intakes. A full wrap for this body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mazda EZ-6

A partial wrap on a Mazda EZ-6 can be the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mazda EZ-6: body, cut-outs and film

The Mazda EZ-6 vinyl wrap is shaped by its four-door sedan body and its length of 193.7 in (4,921 mm). A sedan has a trunk lid, a roof, four doors, and two bumpers as separate panels. The mid-size footprint means a full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) film. Installers usually cut the film into panels for the hood, roof, trunk, doors, fenders, and bumpers.

Mazda EZ-6 wrap ideas should account for the charge port door on plug-in and electric versions. This small door is wrapped as its own piece, so the installer can cut around it cleanly. The door handles, badges, and window trim are removed or masked for a neat finish. Mirrors and the rear spoiler, if fitted, are wrapped as separate panels.

How much vinyl to wrap a Mazda EZ-6 depends on the generation you own. This page covers only the first generation, produced from 2024 to now, so there is no older body to compare. For this generation, a full wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, order about 70 ft (21.5 m) because the pattern must be matched at the seams.

Questions about wrapping a Mazda EZ-6

How much vinyl does it take to wrap a Mazda EZ-6?

A full wrap of a Mazda EZ-6 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount is about 70 ft (21.5 m) because the pattern must be matched. These figures are for the first generation body, which is the only one in this catalog.

Can I wrap only the hood or the roof of a Mazda EZ-6?

Yes, you can wrap only the hood or the roof of a Mazda EZ-6. These panels are offered as a partial wrap, along with the mirror caps. A partial wrap is a smaller job than a full color change and uses less film. It is a way to change the look or protect a single area.

Is a Mazda EZ-6 hard to wrap?

The Mazda EZ-6 is not hard to wrap, but the charge port door adds a step. On plug-in and electric versions, this small door is wrapped as its own piece, so the installer must cut around it carefully. The car is 193.7 in (4,921 mm) long, which means more film and more panels than a smaller sedan. The door handles and badges should be removed for a clean finish.

How many generations of the Mazda EZ-6 does this page cover?

This page covers one generation of the Mazda EZ-6. The first generation, produced from 2024 to now, is the only body in this catalog. There is no older generation to compare, so the film figures here apply to that single body style.