A Maybach S-Class wrapped in blue starts with a color change film, not a factory paint job. Matte blue hides body curves under a soft, low-reflection surface while gloss blue adds depth like a polished paint. Satin blue sits between them with a slight sheen and less glare than gloss. The film amount is about 59 ft (18 m) for the second generation and up to about 59 ft (18 m) for the first generation sedan.
Factory paint on the Maybach S-Class stays untouched under the wrap because the film is applied over the original finish. Seams are placed away from direct sight lines where possible, but the long 215.3 in (5,469 mm) body and curved bumpers need a few joins. The film ends at the roof rails because the panoramic glass roof is not wrapped on every trim. Cut-outs around cameras and sensors keep the driver aids working.
The wrap is removable so the Maybach S-Class can return to its factory paint without leaving adhesive behind. Hand wash is the safe method because brushes and high-pressure jets can lift an edge of the film. Use a pH-neutral soap and a soft mitt, then dry with a microfiber towel. Avoid automatic car washes with spinning brushes on this wrapped sedan.
