A Maybach S-Class wrapped in camo or patterned film is a color change that works like any other film but with a design that must be planned panel by panel. The first decision is the finish, because camouflage, snakeskin, honeycomb and brushed metal each sit differently on a long luxury body. Then you choose the film itself, since not every brand sells the same pattern in the same width or with the same amount of stretch. The last decision is the coverage: a full wrap, a partial wrap, or a film only on the chrome trim. Choose the finish first, because it sets the character of the whole job.

The factory paint stays untouched under the film, but the installer must work around the seams and the sensors of each body. The second generation Maybach S-Class has cameras in the body and a panoramic glass roof that is not wrapped, so the film ends at the roof rails. The first generation has some trims with parking sensors, cameras, fog lamps and a sunroof, each of which needs a clean cut-out. Every cut must be clean, because a patterned film shows a mistake in the pattern more than a solid color does. A good installer plans the seams along the natural lines of the car, where the pattern does not catch the eye.

The film is removable, so the factory paint comes back when the time comes to return a leased car or change the look. The adhesive is made to release from the paint, but the job must be done on paint that is fully clean and dry. Hand wash only is the rule after the wrap, because pressure washers can lift the edges. Use a pH-neutral soap and a soft mitt, and never scrub the edges of the film. The body of the Maybach S-Class is long, so a careful wash takes a little more time.