Wraps by car

Mercedes Simplex wrap

The Mercedes Simplex wrap page covers this early sports car and its single generation built from 1902 to 1909. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Add chrome or patterned film and the estimate rises to about 66 ft (20 m).

1generations17 mof film for a full wrap

Mercedes Simplex, first generation, factory photo
Mercedes Simplex, first generation. Factory color shown.

Mercedes Simplex wrap colors and ideas

  • Simplex black wrap
  • Simplex white wrap
  • Simplex gray wrap
  • Simplex silver wrap
  • Simplex red wrap
  • Simplex blue wrap
  • Simplex green wrap
  • Simplex yellow wrap
  • Simplex orange wrap
  • Simplex purple wrap
  • Simplex pink wrap
  • Simplex teal wrap
  • Simplex brown wrap
  • Simplex gold wrap
  • Simplex chrome wrap
  • Simplex color shift wrap
  • Simplex carbon fiber wrap
  • Simplex camo and patterned wrap

How much vinyl to wrap a Mercedes Simplex

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1902–1909convertible (2 doors)167.3 in (4,250 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Simplex wrap cost factors

Simplex wrap cost depends on the amount of film and the labor of wrapping a tall open body. A full wrap takes about 56 ft (17 m) of cast film, or about 66 ft (20 m) with chrome or patterned film. The 88.8 in (2,255 mm) height requires a platform and adds time, and the two-door convertible shape has a fabric top that must be masked off.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tall body (88.8 in (2,255 mm)): the roof is wrapped from a platform.

Simplex wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes Simplex, first generation, factory photo
Factory color shown

1902–1909 Simplex convertible (first generation)

1902–1909convertible (2 doors)167.3 in (4,250 mm)

The open top of the Mercedes Simplex is not wrapped, and the film ends where the fabric or folding roof begins. The convertible body wraps as one continuous panel from the hood to the rear deck. A folding hard top, if fitted, is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tall body (88.8 in (2,255 mm)): the roof is wrapped from a platform.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Simplex

A partial wrap on a Mercedes Simplex can cover the hood, mirror caps, or rear deck. A Simplex chrome delete covers window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercedes Simplex: body, cut-outs and film

A Mercedes Simplex vinyl wrap follows the shape of a convertible body with two doors. The car measures 167.3 in (4,250 mm) long, so a wrap uses far less film than a modern sedan. The fabric top is not wrapped, and the film ends where the top begins.

Simplex wrap ideas often begin with the tall body, which stands 88.8 in (2,255 mm) high. The roof area is reached from a platform, and the convertible top means the film has a clear stop line at the top edge of the body. Badges and trim are removed for a clean install and then refitted.

How much vinyl to wrap a Simplex depends on the body of the first generation, produced from 1902 to 1909. This is the only generation in the catalog, so there is no change in film amounts between model years. The open top means the film estimate covers the painted body panels only.

Questions about wrapping a Mercedes Simplex

How much vinyl does it take to wrap a Mercedes Simplex?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Mercedes Simplex. Add chrome or patterned film and the amount is about 66 ft (20 m). The estimate is for the newest body of the single generation.

Is the top of a Simplex wrapped?

The top of a Simplex is not wrapped. The fabric top is left as is, and the film ends where the top begins. A folding hard top, if present, is wrapped as panels of its own.

Can I wrap only the hood or the roof of a Simplex?

You can wrap only the hood or the roof of a Simplex. A partial wrap typically covers the hood, mirror caps, or rear deck. Chrome delete covers window trim and badges, and paint protection film is applied on the front end.

Is a Simplex hard to wrap?

A Simplex adds work because of its tall body of 88.8 in (2,255 mm). The roof is wrapped from a platform, and the convertible top must be masked to protect it from film and tools. The two-door body is short at 167.3 in (4,250 mm), so less film is needed but the open top creates a clear stop line.