Wraps by car

Mercedes SL-Class wrap

The Mercedes SL-Class wrap page covers six generations of this sports car, from 1963 to 2021. A vinyl wrap on the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that figure to about 56 ft (17 m). The car remains a two-door convertible or coupe, and each generation brings its own body lengths and wrap notes.

6generations15 mof film for a full wrap

Mercedes SL-Class, sixth generation, factory photo
Mercedes SL-Class, sixth generation. Factory color shown.

Mercedes SL-Class wrap colors and ideas

  • SL-Class black wrap
  • SL-Class white wrap
  • SL-Class gray wrap
  • SL-Class silver wrap
  • SL-Class red wrap
  • SL-Class blue wrap
  • SL-Class green wrap
  • SL-Class yellow wrap
  • SL-Class orange wrap
  • SL-Class purple wrap
  • SL-Class pink wrap
  • SL-Class teal wrap
  • SL-Class brown wrap
  • SL-Class gold wrap
  • SL-Class chrome wrap
  • SL-Class color shift wrap
  • SL-Class carbon fiber wrap
  • SL-Class camo and patterned wrap

How much vinyl to wrap a Mercedes SL-Class

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2021convertible (2 doors)181.8 in (4,617 mm) to 182.3 in (4,631 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2001–2012convertible (2 doors)178.4 in (4,532 mm) to 178.5 in (4,535 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1989–2001convertible (2 doors)177.1 in (4,499 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1971–1989convertible, coupe (2 doors)172.8 in (4,390 mm) to 187.0 in (4,750 mm)about 46 ft (14 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1963–1972convertible, coupe (2 doors)168.7 in (4,285 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1954–1963convertible, coupe (2 doors)168.9 in (4,290 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

SL-Class wrap cost factors

SL-Class wrap cost depends on the car's body style, size, and the chosen film. A coupe takes more film than a convertible of the same generation, and chrome or patterned film adds to the amount of film used. The installer's time includes cleaning body lines, cutting around sensors and lights, and working around the top. Paint condition also matters because older cars may need correction before the vinyl goes on.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

SL-Class wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes SL-Class, sixth generation, factory photo
Factory color shown

2012–2021 SL-Class convertible (sixth generation)

2012–2021convertible (2 doors)181.8 in (4,617 mm) to 182.3 in (4,631 mm)

The Mercedes SL-Class open top is not covered with vinyl on the sixth generation. The fabric top is left unwrapped, and the film ends where the top begins. A folding hard top, when fitted, is wrapped as panels of its own. This keeps the top functional and the wrap edges clean.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Mercedes SL-Class, fifth generation, factory photo
Factory color shown

2001–2012 SL-Class convertible (fifth generation)

2001–2012convertible (2 doors)178.4 in (4,532 mm) to 178.5 in (4,535 mm)

The fifth generation SL-Class restyling in 2006 and 2008 changed the bumpers and lights. Film cut for one version does not fit the other, so the installer uses the right template for the car's build date. Fog lamps in the front bumper require cut-outs in the bumper film on every trim. This generation runs from 2001 to 2012.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Mercedes SL-Class, fourth generation, factory photo
Factory color shown

1989–2001 SL-Class convertible (fourth generation)

1989–2001convertible (2 doors)177.1 in (4,499 mm)

The fourth generation Mercedes SL-Class from 1989 to 2001 may have original or repainted panels. Paint age matters because a test spot comes before a full wrap to check adhesion. These cars range in length 177.1 in (4,499 mm) and need about 48 ft (14.5 m) of film. The installer checks each panel because repainted surfaces can react differently to vinyl.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Mercedes SL-Class, third generation, factory photo
Factory color shown

1971–1989 SL-Class convertible, coupe (third generation)

1971–1989convertible, coupe (2 doors)172.8 in (4,390 mm) to 187.0 in (4,750 mm)

The third generation Mercedes SL-Class offers convertible and coupe bodies. The body style decides the panel plan and the film amount: about 46 ft (14 m) for the convertible to 51 ft (15.5 m) for the coupe. Each long side door is one large piece of film on this generation. Chrome or patterned film can take up to about 57 ft (17.5 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Mercedes SL-Class, second generation, factory photo
Factory color shown

1963–1972 SL-Class convertible, coupe (second generation)

1963–1972convertible, coupe (2 doors)168.7 in (4,285 mm)

The second generation Mercedes SL-Class covers cars from 1963 to 1972. Its years overlap with the newer body from 1971 to 1972, so the owner of a car from those years checks which body it is before ordering film. This generation is 168.7 in (4,285 mm) long and needs about 46 ft (14 m) of cast film. The two long side doors are each wrapped as one piece.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Mercedes SL-Class, first generation, factory photo
Factory color shown

1954–1963 SL-Class convertible, coupe (first generation)

1954–1963convertible, coupe (2 doors)168.9 in (4,290 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on an SL-Class

A partial wrap on a Mercedes SL-Class can cover the hood, mirror caps, or rear deck. SL-Class chrome delete means covering window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and still change the car's look.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercedes SL-Class: body, cut-outs and film

A Mercedes SL-Class vinyl wrap has to follow the body styles and sizes of each generation. The newest car is a convertible 181.8 in (4,617 mm) to 182.3 in (4,631 mm) long, while the oldest is 168.7 in (4,285 mm). The third generation offers both convertible and coupe bodies from 172.8 in (4,390 mm) to 187.0 in (4,750 mm). The installer plans the panel layout to keep the convertible top clear and wrap only the painted body.

SL-Class wrap ideas start with the parts that need cut-outs or come off the car. Parking sensors in some trims need the film cut around each sensor, and cameras in the body need similar cut-outs around each lens. Fog lamps in the front bumper require cut-outs in the bumper film. A fabric top is never wrapped, and the film ends where the top begins.

How much vinyl to wrap an SL-Class changes between the six generations. The newest cars use about 49 ft (15 m) of film, while the fifth generation uses about 48 ft (14.5 m). The third generation's coupe body can take up to 51 ft (15.5 m), but the convertible of that generation needs only about 46 ft (14 m). Restyled bumpers within a generation can also change the width of film needed for those panels.

Questions about wrapping a Mercedes SL-Class

How much vinyl does it take to wrap a Mercedes SL-Class?

About 49 ft (15 m) of 60-inch (1.52 m) cast film is needed to wrap a Mercedes SL-Class of the newest body. This figure refers to the sixth generation, 2012 to 2021. If you choose chrome or patterned film, allow about 56 ft (17 m). The exact amount can vary with the body style and any trim pieces.

Is the top of an SL-Class wrapped?

No, the fabric top of an SL-Class is not wrapped. The film ends where the top begins, and the installer wraps only the painted body panels. On a folding hard top, the top is wrapped as separate panels. This keeps the top's movement and seals intact.

Can the roof of an SL-Class be wrapped?

The roof of an SL-Class can be wrapped only if it is a folding hard top. A fabric top is never wrapped, but a hard top is wrapped as panels of its own. The installer works around the roof edges so the top still folds and seals correctly. On cars with a panoramic glass roof, the glass is not wrapped and the film ends at the roof rails.

Which years of the SL-Class take the same film cuts?

Film cuts for the Mercedes SL-Class depend on the generation and restyling year. The fifth generation restyled in 2006 and 2008, so bumpers and lights changed and film cut for one version does not fit the other. The fourth generation restyled in 1995 and 1998. Cars from overlapping years, like 1971 to 1972 for the second and third generations, need a check of the exact body.