Wraps by car

Mercedes SLC wrap

The Mercedes SLC wrap page covers the R172 convertible produced from 2016 to 2020. This catalog contains one generation of the car. A full vinyl wrap of the body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Owners planning patterned film or chrome film need about 49 ft (15 m).

1generations13.5 mof film for a full wrap

Mercedes SLC, first generation, factory photo
Mercedes SLC, first generation. Factory color shown.

Mercedes SLC wrap colors and ideas

  • Mercedes SLC black wrap
  • Mercedes SLC white wrap
  • Mercedes SLC gray wrap
  • Mercedes SLC silver wrap
  • Mercedes SLC red wrap
  • Mercedes SLC blue wrap
  • Mercedes SLC green wrap
  • Mercedes SLC yellow wrap
  • Mercedes SLC orange wrap
  • Mercedes SLC purple wrap
  • Mercedes SLC pink wrap
  • Mercedes SLC teal wrap
  • Mercedes SLC brown wrap
  • Mercedes SLC gold wrap
  • Mercedes SLC chrome wrap
  • Mercedes SLC color shift wrap
  • Mercedes SLC carbon fiber wrap
  • Mercedes SLC camo and patterned wrap

How much vinyl to wrap a Mercedes SLC

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2020convertible (2 doors)162.7 in (4,133 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Mercedes SLC wrap cost factors

The Mercedes SLC wrap cost depends on the size of the car and the film you choose. This is a 162.7 in (4,133 mm) two-door convertible, so it uses about 44 ft (13.5 m) of 60-inch (1.52 m) film. Installers charge by the amount of film, the time for cutting around sensors, and the difficulty of the panels. A chrome or patterned film raises the cost because you need about 49 ft (15 m).

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Mercedes SLC wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes SLC, first generation, factory photo
Factory color shown

2016–2020 Mercedes SLC convertible (first generation)

2016–2020convertible (2 doors)162.7 in (4,133 mm)

The first generation Mercedes SLC is a convertible with a folding hard top. The top is wrapped as its own panels, and the film ends exactly where the roof begins and ends. The fabric or folding design of the roof decides whether it is wrapped at all. Every panel on the rest of the body gets the same film treatment as the doors and fenders.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Mercedes SLC

The Mercedes SLC takes smaller wrap jobs well because of its short body and clear panel lines. A partial wrap can cover the hood, mirror caps, and rear deck without touching the roof. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) as a clear film on the front end is another option for this car.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercedes SLC: body, cut-outs and film

A Mercedes SLC vinyl wrap follows the short two-door convertible body of this sports car. The car is 162.7 in (4,133 mm) long, which makes it a compact wrap for this class. The single body style means every SLC wrap has the same main panels. Film on a convertible stops where the roof mechanism begins on each side.

Mercedes SLC wrap ideas must respect the glass roof and the parking sensors fitted on every trim. The panoramic glass roof is never wrapped, and the film ends at the roof rails around it. Each bumper has parking sensors, so the installer cuts the film around each sensor. Badges and door handles are removed for a clean finish before the film is applied.

How much vinyl to wrap a Mercedes SLC depends on the single generation sold in the catalog. The car was built from 2016 to 2020 with the R172 body code. Because there were no earlier or later SLC generations, the film estimate stays the same for every year. A standard color change needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Mercedes SLC

How much vinyl does it take to wrap a Mercedes SLC?

A full vinyl wrap on a Mercedes SLC takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The figure is for the R172 convertible body. A chrome or patterned film adds length, so the total is about 49 ft (15 m).

Is the top of a Mercedes SLC wrapped?

No, the top of a Mercedes SLC is not wrapped as part of the body film. The roof of this convertible is a folding hard top with its own panels, and the film ends where the roof begins. The glass section of the roof is also left clear.

Can the roof of a Mercedes SLC be wrapped?

Yes, the roof of a Mercedes SLC can be wrapped. The folding hard top can be wrapped as panels of their own. The film is applied to the roof panels, but the glass areas are not covered.

Can I wrap only the hood or the roof of a Mercedes SLC?

Yes, you can wrap only the hood or the roof of a Mercedes SLC. A partial wrap covering the hood, mirror caps, and rear deck is a smaller job. Wrapping just the roof is also possible because the top is a separate panel.