Wraps by car

Mercedes SLR McLaren wrap

The Mercedes SLR McLaren wrap page covers the 2003–2009 sports car in its single generation. A full wrap of the newest body uses about 43 ft (13 m) of film for the convertible and 51 ft (15.5 m) for the coupe. The vinyl wrap options include color change, chrome delete, and paint protection film.

1generations13 mof film for a full wrap

Mercedes SLR McLaren, first generation, factory photo
Mercedes SLR McLaren, first generation. Factory color shown.

Mercedes SLR McLaren wrap colors and ideas

  • SLR McLaren black wrap
  • SLR McLaren white wrap
  • SLR McLaren gray wrap
  • SLR McLaren silver wrap
  • SLR McLaren red wrap
  • SLR McLaren blue wrap
  • SLR McLaren green wrap
  • SLR McLaren yellow wrap
  • SLR McLaren orange wrap
  • SLR McLaren purple wrap
  • SLR McLaren pink wrap
  • SLR McLaren teal wrap
  • SLR McLaren brown wrap
  • SLR McLaren gold wrap
  • SLR McLaren chrome wrap
  • SLR McLaren color shift wrap
  • SLR McLaren carbon fiber wrap
  • SLR McLaren camo and patterned wrap

How much vinyl to wrap a Mercedes SLR McLaren

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2009convertible, coupe (2 doors)183.3 in (4,656 mm)about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

SLR McLaren wrap cost factors

SLR McLaren wrap cost depends on the film amount, the body style, and the number of cut-outs like the fog lamps. The coupe uses about 51 ft (15.5 m) and the convertible about 43 ft (13 m), so panel count and labor differ. Chrome delete and partial wraps reduce material but add fine trimming work.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

SLR McLaren wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes SLR McLaren, first generation, factory photo
Factory color shown

2003–2009 SLR McLaren convertible, coupe (first generation)

2003–2009convertible, coupe (2 doors)183.3 in (4,656 mm)

The first generation open top is either a fabric top, which is not wrapped, or a folding hard top, which is wrapped as panels of its own. On the fabric version the film ends where the top begins, leaving a clean line. The hard top panels are wrapped separately to follow their shape.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an SLR McLaren

SLR McLaren chrome delete covers the window trim and badges with black film for a subtle change. A partial wrap can be the roof, hood, or mirror caps for a smaller job. Paint protection film (PPF) in clear film on the front end guards against stone chips without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercedes SLR McLaren: body, cut-outs and film

A Mercedes SLR McLaren vinyl wrap must handle a body 183.3 in (4,656 mm) long with two large side doors. Each door is one large piece of film, and the long hood and rear deck add surface area. The convertible and coupe styles change how much film is needed and how the edges are finished.

SLR McLaren wrap ideas start with the factory look: fog lamps sit in the front bumper on every trim, so the bumper film needs cut-outs. The two long doors are best wrapped in single pieces to avoid seams. For the convertible, the fabric top is not wrapped and the film ends where it begins.

How much vinyl to wrap an SLR McLaren depends on the body style: the coupe needs about 51 ft (15.5 m) and the convertible about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can push the total up to about 57 ft (17.5 m). Both bodies share the same length of 183.3 in (4,656 mm), so film width planning is identical.

Questions about wrapping a Mercedes SLR McLaren

How much vinyl does it take to wrap a Mercedes SLR McLaren?

About 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, using 60-inch (1.52 m) cast film. Chrome or patterned film may need up to about 57 ft (17.5 m). These figures are for a full wrap of the 2003–2009 body.

Is the top of an SLR McLaren wrapped?

No, a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own. The rest of the body is wrapped normally.

Which SLR McLaren body takes more film?

The coupe takes more film: about 51 ft (15.5 m) versus about 43 ft (13 m) for the convertible. The fixed roof of the coupe adds the extra surface area. With chrome or patterned film, the coupe figure can rise to about 57 ft (17.5 m).

Can I wrap only the hood or the roof of an SLR McLaren?

Yes, you can wrap only the hood, the roof, or the mirror caps as a partial job. Chrome delete on the window trim and badges is another smaller option. Paint protection film on the front end is a clear, partial wrap.