Wraps by car

Mercedes W120 wrap

The Mercedes W120 wrap page covers the first generation of the W120, produced from 1953 to 1962. A full vinyl wrap of this classic sedan takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 64 ft (19.5 m).

1generations16.5 mof film for a full wrap

Mercedes W120, first generation, factory photo
Mercedes W120, first generation. Factory color shown.

Mercedes W120 wrap colors and ideas

  • Mercedes W120 black wrap
  • Mercedes W120 white wrap
  • Mercedes W120 gray wrap
  • Mercedes W120 silver wrap
  • Mercedes W120 red wrap
  • Mercedes W120 blue wrap
  • Mercedes W120 green wrap
  • Mercedes W120 yellow wrap
  • Mercedes W120 orange wrap
  • Mercedes W120 purple wrap
  • Mercedes W120 pink wrap
  • Mercedes W120 teal wrap
  • Mercedes W120 brown wrap
  • Mercedes W120 gold wrap
  • Mercedes W120 chrome wrap
  • Mercedes W120 color shift wrap
  • Mercedes W120 carbon fiber wrap
  • Mercedes W120 camo and patterned wrap

How much vinyl to wrap a Mercedes W120

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1953–1962sedan (4 doors)175.6 in (4,460 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Mercedes W120 wrap cost factors

The Mercedes W120 wrap cost depends on the film type, the condition of the paint, and the shop time for trim removal. A cast color change film wraps the whole 175.6 in (4,460 mm) sedan with about 54 ft (16.5 m) of material. A chrome or patterned film adds about 10 ft (3 m) to the estimate. Paint correction before the wrap adds time, and a car with original paint needs extra prep so the film bonds evenly.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Mercedes W120 wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes W120, first generation, factory photo
Factory color shown

1953–1962 Mercedes W120 sedan (first generation)

1953–1962sedan (4 doors)175.6 in (4,460 mm)

The first generation Mercedes W120 has paint that may be original or repainted, so a test spot comes before a full wrap. Older paint can be thin at the edges, and the film may pull clear coat when it is removed. A test spot on a door or fender shows how the paint reacts before the whole car is covered. If the paint fails the test, the film is not applied.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Mercedes W120

Partial wrap jobs on the Mercedes W120 include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material and leave the rest of the car in its original color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercedes W120: body, cut-outs and film

The Mercedes W120 vinyl wrap covers a full-size four-door sedan measuring 175.6 in (4,460 mm) long. The four doors and long roofline add seams that a smaller car would not need. The amount of film is comparable to modern mid-size sedans despite the older body shape. The tall, flat panels make for a straightforward layout with few deep recesses.

Mercedes W120 wrap ideas should account for the bright trim, door handles, and badges. These parts are removed or wrapped with cut-outs so the film sits flat and does not lift. The wraparound bumpers and grille are not wrapped because the film cannot follow their curved metal. The side mirrors come off their mounts for a clean edge around the base.

To know how much vinyl to wrap a Mercedes W120, measure the car rather than rely on film charts. The W120 was built from 1953 to 1962 as a single generation with one body style, so there are no size differences between years. A car that has been repainted may have thicker paint at the edges, but that does not change the film estimate. Order the full 54 ft (16.5 m) and keep the offcuts for the door jambs.

Questions about wrapping a Mercedes W120

How much vinyl does it take to wrap a Mercedes W120?

A Mercedes W120 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film adds about 10 ft (3 m) to that amount.

Can I wrap only the hood or the roof of a Mercedes W120?

Yes, you can wrap only the hood or the roof of a Mercedes W120. The roof and hood are listed as partial wrap options, along with mirror caps.

Is a Mercedes W120 hard to wrap?

A Mercedes W120 is not hard to wrap, but the bright trim and badges add work. The parts need cut-outs or removal, and the car is a full-size sedan at 175.6 in (4,460 mm) long.

How many generations of the Mercedes W120 does this page cover?

This page covers one generation of the Mercedes W120, produced from 1953 to 1962. The first generation is the only body style for this model.