Wraps by car

Mercedes W121 wrap

The Mercedes W121 wrap page covers the first generation sedan produced from 1959 to 1961. This car is the only generation in this catalog and its full body wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. A vinyl wrap in a chrome or patterned finish needs about 64 ft (19.5 m) of film.

1generations17 mof film for a full wrap

Mercedes W121, first generation, factory photo
Mercedes W121, first generation. Factory color shown.

Mercedes W121 wrap colors and ideas

  • Mercedes W121 black wrap
  • Mercedes W121 white wrap
  • Mercedes W121 gray wrap
  • Mercedes W121 silver wrap
  • Mercedes W121 red wrap
  • Mercedes W121 blue wrap
  • Mercedes W121 green wrap
  • Mercedes W121 yellow wrap
  • Mercedes W121 orange wrap
  • Mercedes W121 purple wrap
  • Mercedes W121 pink wrap
  • Mercedes W121 teal wrap
  • Mercedes W121 brown wrap
  • Mercedes W121 gold wrap
  • Mercedes W121 chrome wrap
  • Mercedes W121 color shift wrap
  • Mercedes W121 carbon fiber wrap
  • Mercedes W121 camo and patterned wrap

How much vinyl to wrap a Mercedes W121

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1959–1961sedan (4 doors)176.6 in (4,485 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Mercedes W121 wrap cost factors

The Mercedes W121 wrap cost depends on how much 60-inch (1.52 m) film the job needs and how much of the bright trim has to come off. A full color change on this 176.6 in (4,485 mm) sedan uses about 56 ft (17 m) of cast film, while a chrome or patterned finish uses about 64 ft (19.5 m). The age of the paint also matters, because a test spot on an original or repainted panel tells the installer if the film will bond safely. Cutting around four doors, the fuel filler, and the front and rear lights adds time to the job.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Mercedes W121 wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes W121, first generation, factory photo
Factory color shown

1959–1961 Mercedes W121 sedan (first generation)

1959–1961sedan (4 doors)176.6 in (4,485 mm)

The first generation Mercedes W121 was produced from 1959 to 1961 and is a mid-size sedan with four doors. Paint age matters on a car of these years because panels may still be original or may have been repainted at some point. A test spot before a full wrap shows how the old paint reacts to the film and to the heat from a heat gun. The installer checks each panel before the wrap starts so the film does not lift later.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Mercedes W121

A partial wrap on the Mercedes W121 covers the roof, the hood, or the mirror caps without wrapping the whole sedan. The Mercedes W121 chrome delete covers the window trim and the badges with black film to change the look of the bright parts. A paint protection film (PPF) job puts clear film on the front end to shield the paint from stone chips. Each of these jobs uses less film than a full wrap and can be done on its own.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercedes W121: body, cut-outs and film

The Mercedes W121 vinyl wrap has to follow one sedan body style with four doors and a length of 176.6 in (4,485 mm). The mid-size body means the installer works around long rear fenders and a tall greenhouse. The sedan roofline creates one continuous area from the windshield header to the rear window. The wrap uses the same amount of film no matter which trim level is being covered.

Mercedes W121 wrap ideas start with the bright trim along the windows and the badges, which should be removed before the film goes on. Cut-outs are needed around door handles, side mirrors, the fuel filler, and the front and rear lights. The front bumper and grille come off for a cleaner edge at the front of the hood. The rear bumper can stay in place, but the installer tapes off the body line to keep the film from lifting at the joint.

Anyone counting how much vinyl to wrap a Mercedes W121 only needs to plan for one generation, because the car was built from 1959 to 1961 as a single body style. A full wrap of this 176.6 in (4,485 mm) sedan takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The film runs front to back on the roof, the hood, and both sides without extra panels for a long wheelbase version. The installer adds about 8 ft (2.4 m) when the job uses a chrome or patterned film.

Questions about wrapping a Mercedes W121

How much vinyl does it take to wrap a Mercedes W121?

A full wrap of a Mercedes W121 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. If the wrap uses a chrome or patterned film, the job takes about 64 ft (19.5 m). The figure comes from the single body style of this car, the sedan built from 1959 to 1961.

Can I wrap only the hood or the roof of a Mercedes W121?

Yes, you can wrap only the hood or the roof of a Mercedes W121 as a partial wrap. A partial wrap on this car can also cover the mirror caps on their own. The chrome delete is another option that changes the window trim and badges without wrapping a full panel.

Is a Mercedes W121 hard to wrap?

A Mercedes W121 is not especially hard to wrap, but its age and its trim add work. The car is a 176.6 in (4,485 mm) sedan with four doors, so the installer has to cut around the handles, the side mirrors, and the fuel filler. The bright trim and the badges have to come off before the film goes on, and an old repainted panel may need a test spot first.

How many generations of the Mercedes W121 does this page cover?

This page covers one generation of the Mercedes W121. The car was produced from 1959 to 1961 as a single generation with the W121 code. The catalog lists only this generation, so a full wrap always uses the same film estimate.