Wraps by car

Mercedes W186 wrap

The Mercedes W186 wrap page covers the first generation built from 1951 to 1957. This catalog page describes vinyl wrap planning for the convertible, coupe, and sedan. A full wrap of one of these bodies takes about 59 ft (18 m) to 62 ft (19 m) of 60-inch (1.52 m) cast film. The car is listed as one generation in this catalog.

1generations18 mof film for a full wrap

Mercedes W186, first generation, factory photo
Mercedes W186, first generation. Factory color shown.

Mercedes W186 wrap colors and ideas

  • Mercedes W186 black wrap
  • Mercedes W186 white wrap
  • Mercedes W186 gray wrap
  • Mercedes W186 silver wrap
  • Mercedes W186 red wrap
  • Mercedes W186 blue wrap
  • Mercedes W186 green wrap
  • Mercedes W186 yellow wrap
  • Mercedes W186 orange wrap
  • Mercedes W186 purple wrap
  • Mercedes W186 pink wrap
  • Mercedes W186 teal wrap
  • Mercedes W186 brown wrap
  • Mercedes W186 gold wrap
  • Mercedes W186 chrome wrap
  • Mercedes W186 color shift wrap
  • Mercedes W186 carbon fiber wrap
  • Mercedes W186 camo and patterned wrap

How much vinyl to wrap a Mercedes W186

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1951–1957convertible, coupe, sedan (2 or 4 doors)194.9 in (4,950 mm)about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Mercedes W186 wrap cost factors

The Mercedes W186 wrap cost depends on the body style, the amount of film, and the labor for a 1950s car. The sedan uses about 62 ft (19 m) of film, while the convertible uses about 59 ft (18 m). Chrome or patterned film can push the total to about 70 ft (21.5 m). Prep work for older paint and trim also adds to the cost.

  • Film for a full wrap: about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Mercedes W186 wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes W186, first generation, factory photo
Factory color shown

1951–1957 Mercedes W186 convertible, coupe, sedan (first generation)

1951–1957convertible, coupe, sedan (2 or 4 doors)194.9 in (4,950 mm)

The open top of the Mercedes W186 first generation means the fabric top is not wrapped on a convertible. The film ends where the fabric begins, so the installer trims the vinyl along that line. If the car has a folding hard top, that top is wrapped as its own separate panels. This keeps the wrap looking clean when the top is up or down.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mercedes W186

A partial wrap on a Mercedes W186 can cover the roof, hood, or mirror caps instead of the whole car. Chrome delete covers bright window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less film and are a good way to change one part of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercedes W186: body, cut-outs and film

The Mercedes W186 vinyl wrap starts with body styles from a convertible to a 4-door sedan. The longest body in the catalog is 194.9 in (4,950 mm), so a full wrap needs at least 59 ft (18 m) of film. The convertible takes the least film because its fabric top is not wrapped. The sedan takes the most film, around 62 ft (19 m), due to its larger roof and rear panels.

For Mercedes W186 wrap ideas, plan around the doors, handles, and trim of a 1950s body. The convertible top is not covered, so the film ends where the fabric begins. A folding hard top is wrapped as separate panels of its own. Remove badges and small trim to wrap cleanly, then reinstall them over the film.

To figure how much vinyl to wrap a Mercedes W186, compare the three body styles of this generation. The convertible needs about 59 ft (18 m) of film because its top is not wrapped. The sedan needs about 62 ft (19 m) because it has a full metal roof. The coupe sits between them, using slightly more than the convertible and less than the sedan.

Questions about wrapping a Mercedes W186

How much vinyl does it take to wrap a Mercedes W186?

It takes about 59 ft (18 m) for a convertible to 62 ft (19 m) for a sedan of 60-inch (1.52 m) cast film to wrap a Mercedes W186. Chrome or patterned film can need up to about 70 ft (21.5 m). The exact amount depends on the body style and how many panels are wrapped.

Is the top of a Mercedes W186 wrapped?

No, the fabric top of a Mercedes W186 convertible is not wrapped. The vinyl film ends where the fabric begins. A folding hard top is wrapped as its own panels, so only metal surfaces get film.

Which Mercedes W186 body takes more film?

The sedan takes more film than the convertible on a Mercedes W186. The sedan needs about 62 ft (19 m), while the convertible needs about 59 ft (18 m). The difference comes from the sedan's full metal roof and larger rear panels.

Can I wrap only the hood or the roof of a Mercedes W186?

Yes, you can wrap only the hood or the roof of a Mercedes W186. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges, and paint protection film (PPF) goes on the front end.