Wraps by car

Morgan Plus 4 wrap

The Morgan Plus 4 wrap page covers both generations of the open-top sports car. A vinyl wrap on the newest body takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. The earlier car from 1950–2020 uses about 38 ft (11.5 m) of standard film. Chrome or patterned film adds roughly ten feet on either body.

2generations11 mof film for a full wrap

Morgan Plus 4, second generation, factory photo
Morgan Plus 4, second generation. Factory color shown.

Morgan Plus 4 wrap colors and ideas

  • Plus 4 black wrap
  • Plus 4 white wrap
  • Plus 4 gray wrap
  • Plus 4 silver wrap
  • Plus 4 red wrap
  • Plus 4 blue wrap
  • Plus 4 green wrap
  • Plus 4 yellow wrap
  • Plus 4 orange wrap
  • Plus 4 purple wrap
  • Plus 4 pink wrap
  • Plus 4 teal wrap
  • Plus 4 brown wrap
  • Plus 4 gold wrap
  • Plus 4 chrome wrap
  • Plus 4 color shift wrap
  • Plus 4 carbon fiber wrap
  • Plus 4 camo and patterned wrap

How much vinyl to wrap a Morgan Plus 4

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowconvertible (2 doors)150.8 in (3,830 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)
1950–2020convertible (2 doors)157.9 in (4,010 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Plus 4 wrap cost factors

Plus 4 wrap cost depends on the film area, the film type, and how much of the 36 ft (11 m) of cast film is used. The 2020–now car is shorter at 150.8 in (3,830 mm) than the earlier car at 157.9 in (4,010 mm), which changes the cutting time. Chrome or patterned film adds about 46 ft (14 m) of film to lay and match on the current body. The wrap shop also charges more when the car has brushed metal, a folding hard top, or damaged paint that needs prep.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Plus 4 wraps by generation

Swipe sideways. Tap a card for the full description.

Morgan Plus 4, second generation, factory photo
Factory color shown

2020–now Plus 4 convertible (second generation)

2020–nowconvertible (2 doors)150.8 in (3,830 mm)

The second-generation Plus 4 has a fabric top that is not wrapped, so the vinyl ends at the top edge of the body. A folding hard top, if fitted, is wrapped as separate panels that stay in place when folded. The 150.8 in (3,830 mm) body uses about 36 ft (11 m) of 60-inch (1.52 m) cast film. On this open car the wrap must stop cleanly at the soft top seal to prevent lifting.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Morgan Plus 4, first generation, factory photo
Factory color shown

1950–2020 Plus 4 convertible (first generation)

1950–2020convertible (2 doors)157.9 in (4,010 mm)

Paint age on a first-generation Plus 4 from 1950–2020 varies, and panels may be original or repainted. A test spot of film is applied before a full wrap to make sure the old paint holds. The 157.9 in (4,010 mm) body takes about 38 ft (11.5 m) of standard cast film. If the paint is tired, a clear paint protection film (PPF) on the front end can help keep the front of the car clean.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Plus 4

A partial wrap on a Plus 4 covers the hood, mirror caps, or rear deck with a cut piece of cast film. Plus 4 chrome delete covers the window trim and badges with black film, leaving the bright grille as an option. Paint protection film is a clear layer that protects the front end from stone chips. These small jobs use far less film than the full 36 ft (11 m) needed for a whole color change wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Morgan Plus 4: body, cut-outs and film

A Morgan Plus 4 vinyl wrap works with a convertible body that is 150.8 in (3,830 mm) long on the current car. The fabric top is not wrapped, so the film ends cleanly at the top edge of the body. The first generation is longer at 157.9 in (4,010 mm), which requires a modest increase in material. Both bodies are compact sports cars, but the long hood and separate rear deck panel take careful film layout.

Plus 4 wrap ideas start with the doors, hood, and rear deck, which are the main flat areas. The wrap film is cut around the distinctive chrome grille, door handles, and tail lights on both generations. A folding hard top, when fitted, is wrapped as its own removable panels. The fabric soft top is never wrapped, and the film ends where the top begins.

How much vinyl to wrap a Plus 4 depends on whether you have the first or second generation. The 2020–now car uses about 36 ft (11 m) of standard cast film. The earlier 1950–2020 car needs about 38 ft (11.5 m) of the same film. Chrome or patterned film adds about 10 ft (3 m) on either generation because the pattern must be matched.

Questions about wrapping a Morgan Plus 4

How much vinyl does it take to wrap a Morgan Plus 4?

A Morgan Plus 4 takes about 36 ft (11 m) of 60-inch (1.52 m) cast film for a full color change wrap on the newest body. The 1950–2020 car uses about 38 ft (11.5 m) of the same film. Chrome or patterned film adds about 46 ft (14 m) on the current car because the pattern must be lined up.

Is the top of a Plus 4 wrapped?

Yes, the fabric top of a Plus 4 is never wrapped, and the film ends where the top begins. A folding hard top, when fitted, is wrapped as its own panels. The film is cut to follow the top edge of the body on both generations.

Can I wrap only the hood or the roof of a Plus 4?

Yes, you can wrap only the hood or the roof of a Plus 4 as a partial wrap. The hood is a single panel that can be covered with a piece of cast film. The roof is not wrapped because it is a fabric top, but a folding hard top can be wrapped as separate panels.

Is a Plus 4 hard to wrap?

A Plus 4 adds work because the convertible body has a fabric top, and the film must end cleanly at the top edge. The body is not long, but the 150.8 in (3,830 mm) car still needs careful fitting on the hood and rear deck. A folding hard top must be wrapped as removable panels, which takes extra time.