Wraps by car

Morgan Plus 6 wrap

The Morgan Plus 6 wrap guide covers the single generation built from 2019 onward. A vinyl wrap for this convertible sports car takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 48 ft (14.5 m) for a full color change.

1generations11.5 mof film for a full wrap

Morgan Plus 6, first generation, factory photo
Morgan Plus 6, first generation. Factory color shown.

Morgan Plus 6 wrap colors and ideas

  • Plus 6 black wrap
  • Plus 6 white wrap
  • Plus 6 gray wrap
  • Plus 6 silver wrap
  • Plus 6 red wrap
  • Plus 6 blue wrap
  • Plus 6 green wrap
  • Plus 6 yellow wrap
  • Plus 6 orange wrap
  • Plus 6 purple wrap
  • Plus 6 pink wrap
  • Plus 6 teal wrap
  • Plus 6 brown wrap
  • Plus 6 gold wrap
  • Plus 6 chrome wrap
  • Plus 6 color shift wrap
  • Plus 6 carbon fiber wrap
  • Plus 6 camo and patterned wrap

How much vinyl to wrap a Morgan Plus 6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowconvertible (2 doors)153.1 in (3,890 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Plus 6 wrap cost factors

Plus 6 wrap cost depends on the film type, the coverage area, and the amount of disassembly. The car's 153.1 in (3,890 mm) length and convertible body affect material use, with 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full color change. Installers also account for the extra time to work around the fabric top and separate body panels.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Plus 6 wraps by generation

Swipe sideways. Tap a card for the full description.

Morgan Plus 6, first generation, factory photo
Factory color shown

2019–now Plus 6 convertible (first generation)

2019–nowconvertible (2 doors)153.1 in (3,890 mm)

The Morgan Plus 6 first generation has a fabric convertible top that is not wrapped. The film ends where the top begins, following the body line around the cockpit. The top itself remains its original color and material.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Plus 6

The Morgan Plus 6 can receive a partial wrap on the hood, mirror caps, and rear deck for a smaller color change. A chrome delete covers window trim and badges with black film, which adds contrast without wrapping the whole car. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Morgan Plus 6: body, cut-outs and film

The Morgan Plus 6 vinyl wrap follows the compact convertible body, which is 153.1 in (3,890 mm) long. Its two-door open shape has no roof panel to cover, so film use stays close to the base estimate. The short rear deck and separate fenders make panel sizing straightforward for an installer.

Plus 6 wrap ideas include a satin or gloss color change over the aluminum body panels. The convertible body means the fabric top is left unwrapped and the film ends where the top begins. Door handles, badges, and trim are removed or cut around during installation.

How much vinyl to wrap a Plus 6 depends on the film type, with about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a standard color change. The first generation, produced from 2019 onward, keeps the same body dimensions throughout its run. Chrome or patterned film needs about 48 ft (14.5 m) to allow pattern matching and overlap.

Questions about wrapping a Morgan Plus 6

How much vinyl does it take to wrap a Morgan Plus 6?

It takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film to wrap a Morgan Plus 6. For chrome or patterned film, the estimate is about 48 ft (14.5 m). These figures apply to the newest body style, which has been produced since 2019.

Is the top of a Plus 6 wrapped?

No, the top of a Plus 6 is not wrapped. The convertible body has a fabric top that stays uncovered, and the vinyl film ends where the top begins. A folding hard top, if fitted, is wrapped as separate panels of its own.

Can I wrap only the hood or the roof of a Plus 6?

Yes, you can wrap only the hood or the roof of a Plus 6 as a partial wrap. The standard partial wrap covers the hood, mirror caps, and rear deck, but you can choose just the hood. The roof is part of the fabric top, so it is not wrapped.

Is a Plus 6 hard to wrap?

The Plus 6 is moderately challenging to wrap because of its convertible body and compact size. The fabric top must be masked carefully so the film ends cleanly where the top begins. The car's 153.1 in (3,890 mm) length and separate fenders require precise cutting and fitting.