Choose between matte, satin and gloss brown first, because the finish sets the daytime look of the Cima. Then pick a film from the 42 in the catalog; each finish behaves differently on the sedan's long sides. A full wrap covers the body, while a partial wrap in brown covers only the roof, hood and mirror caps. The first generation's chrome trim takes extra film if you cover it, about 67 ft (20.5 m).

A color change wrap shows every ripple in the factory paint, so the Cima's panels must be smooth before the film goes down. Seams are placed along body lines, and the sedan's long doors leave few natural breaks on the sides. The fifth generation's 201.2 in (5,110 mm) length creates long film runs on the lower doors. Any deep scratch must be fixed first, because the brown film will not hide it.

Brown vinyl is removable, but the painted surface under it must be intact, so check for flaking clearcoat before you wrap. Hand wash the wrapped Cima, and avoid automatic brushes that catch film edges. Use a pH-neutral soap and a soft mitt, then dry the car with a microfiber towel. No wax or sealant is needed on wrap film, only a wrap-safe detail spray.