Wraps by car

Nissan Cima wrap

The Nissan Cima wrap page covers all five generations of this luxury sedan, from the first Y31 through the current Y51. A full vinyl wrap of the newest fifth-generation body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on the same car needs about 72 ft (22 m). The estimates below give a starting point for planning material on any Cima.

5generations19 mof film for a full wrap

Nissan Cima, fifth generation, factory photo
Nissan Cima, fifth generation. Factory color shown.

Nissan Cima wrap colors and ideas

  • Cima black wrap
  • Cima white wrap
  • Cima gray wrap
  • Cima silver wrap
  • Cima red wrap
  • Cima blue wrap
  • Cima green wrap
  • Cima yellow wrap
  • Cima orange wrap
  • Cima purple wrap
  • Cima pink wrap
  • Cima teal wrap
  • Cima brown wrap
  • Cima gold wrap
  • Cima chrome wrap
  • Cima color shift wrap
  • Cima carbon fiber wrap
  • Cima camo and patterned wrap

How much vinyl to wrap a Nissan Cima

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowsedan (4 doors)201.2 in (5,110 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2001–2010sedan (4 doors)196.7 in (4,995 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1996–2000sedan (4 doors)195.7 in (4,970 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1991–1996sedan (4 doors)194.1 in (4,930 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1988–1991sedan (4 doors)192.5 in (4,890 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Cima wrap cost factors

Cima wrap cost depends on the generation, the film type and the amount of labor for this large sedan. A plain cast film on the fifth generation starts at about 62 ft (19 m) of 60-inch (1.52 m) material while chrome or patterned film takes about 72 ft (22 m). The first generation can need up to 67 ft (20.5 m) for patterned film. Removal of trim, paint correction and cut-outs around sensors also affect the final cost.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

Cima wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Cima, fifth generation, factory photo
Factory color shown

2012–now Cima sedan (fifth generation)

2012–nowsedan (4 doors)201.2 in (5,110 mm)

The fifth-generation Nissan Cima, built from 2012 to the present, is the largest body in the catalog at 201.2 in (5,110 mm) long. Paint on a car of these years may be original or repainted, and a test spot is necessary before a full wrap to check adhesion. If the clear coat is failing, wrap film will not bond well and the surface needs prep first. A paint meter helps find repaired panels before you quote the job.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Nissan Cima, fourth generation, factory photo
Factory color shown

2001–2010 Cima sedan (fourth generation)

2001–2010sedan (4 doors)196.7 in (4,995 mm)

The fourth-generation Nissan Cima is a luxury sedan from 2001–2010, measuring 196.7 in (4,995 mm) long. This size means a full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, with extra for chrome or patterned film. The four-door body has large roof, hood and trunk panels plus long doors, so you will cut more panels from fewer large pieces. Count the deep front and rear bumpers separately, since they need more film and more time.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Nissan Cima, third generation, factory photo
Factory color shown

1996–2000 Cima sedan (third generation)

1996–2000sedan (4 doors)195.7 in (4,970 mm)

The third-generation Nissan Cima, produced from 1996–2000, is 195.7 in (4,970 mm) long with four doors. A full wrap of this sedan takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The long body gives you four big doors, a wide hood and a large roof, so panel count is moderate but panel size is large. Patterned or chrome film needs about 62 ft (19 m) because matching the direction of the pattern wastes material.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Nissan Cima, second generation, factory photo
Factory color shown

1991–1996 Cima sedan (second generation)

1991–1996sedan (4 doors)194.1 in (4,930 mm)

The second-generation Nissan Cima, sold from 1991–1996, is 194.1 in (4,930 mm) long. This body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full color change wrap. The four-door sedan shape means you wrap long doors, a large roof and a long trunk lid plus the deep bumpers. Allow more material if you use chrome or patterned film, which can take about 61 ft (18.5 m).

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Nissan Cima, first generation, factory photo
Factory color shown

1988–1991 Cima sedan (first generation)

1988–1991sedan (4 doors)192.5 in (4,890 mm)

The first-generation Nissan Cima, from 1988–1991, is the shortest at 192.5 in (4,890 mm) but can still use a lot of film because of its upright boxy lines. A full wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned film can take about 67 ft (20.5 m). The flat sides and angular bumpers are simpler to lay film on than curved modern shapes. Fewer complex curves may mean less stretching, but the large chrome grille and trim add detail work.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Cima

Partial wrap jobs on a Cima include the roof, hood, mirror caps or a combination of those panels. Cima chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is clear film on the front end, and a front clip on this large car takes less material than a full wrap but still needs precise cutting. Each partial job can be done without wrapping the whole sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan Cima: body, cut-outs and film

A Nissan Cima vinyl wrap starts with a large four-door sedan body, and every generation measures close to or over 196.7 in (4,995 mm) in length. The newest Y51 is 201.2 in (5,110 mm) long, so a full color change uses more film than smaller cars and the roof, hood and trunk add large flat areas. The vertical front and rear fascias and long rocker panels mean you lay film on tall sections as well as wide ones. A careful installer will plan panel by panel and leave extra film for the deep bumpers.

Cima wrap ideas begin with areas that need cut-outs or come off, like door handles, mirrors, badges, grilles, antenna bases, parking sensors and headlight washers. The large front grille and the chrome trim around the windows are best removed or masked for clean edges. On fifth-generation cars the front bumper has many openings and sensors that add time. Removing the door handles and mirrors gives a tidier finish on the doors.

If you are counting how much vinyl to wrap a Cima, the film estimate changes between generations and between plain and patterned film. The newest Y51 needs about 62 ft (19 m) of cast film while the earlier F50 and Y33 take about 54 ft (16.5 m). The first Y31 can need up to 67 ft (20.5 m) of chrome or patterned material because of its boxier panels. Always add a margin for mistakes and complex bumper shapes.

Questions about wrapping a Nissan Cima

How much vinyl does it take to wrap a Nissan Cima?

A full wrap of the newest Nissan Cima takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl film. Chrome or patterned film needs about 72 ft (22 m) because of pattern matching and the larger chrome areas. Older generations take between 52 ft (16 m) and 67 ft (20.5 m).

Can I wrap only the hood or the roof of a Cima?

Yes, you can wrap only the hood or the roof of a Cima. Partial wrap jobs include the roof, hood, mirror caps or any single large panel. A Cima chrome delete covers the window trim and badges instead of a full panel. Paint protection film on the front end is another partial option.

Is a Cima hard to wrap?

A Cima is not the easiest car to wrap because of its size and the many cut-outs around trim and sensors. The newest body is 201.2 in (5,110 mm) long, so you need large pieces of film and a helper for the roof and hood. The front bumper on the fifth generation has many openings that require careful relief cuts. Door handles, mirrors and badges should be removed for a clean install.

How many generations of the Cima does this page cover?

This page covers five generations of the Nissan Cima, from the first Y31 of 1988–1991 to the current Y51. Each generation has a different body length and film estimate. The catalog includes the second through fourth generations as well.