Wraps by car

Nissan Serena wrap

The Nissan Serena wrap guide covers all five generations of this minivan, from the first C23 body to the current C27. The newest Serena takes about 69 ft (21 m) of 60-inch (1.52 m) cast film for a full color change wrap. A chrome or patterned film on the same body takes about 79 ft (24 m) because of the extra material needed for trimming.

5generations21 mof film for a full wrap

Nissan Serena, fifth generation, factory photo
Nissan Serena, fifth generation. Factory color shown.

Nissan Serena wrap colors and ideas

  • Serena black wrap
  • Serena white wrap
  • Serena gray wrap
  • Serena silver wrap
  • Serena red wrap
  • Serena blue wrap
  • Serena green wrap
  • Serena yellow wrap
  • Serena orange wrap
  • Serena purple wrap
  • Serena pink wrap
  • Serena teal wrap
  • Serena brown wrap
  • Serena gold wrap
  • Serena chrome wrap
  • Serena color shift wrap
  • Serena carbon fiber wrap
  • Serena camo and patterned wrap

How much vinyl to wrap a Nissan Serena

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowvan (5 doors)184.6 in (4,690 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
2010–2016van (5 doors)184.4 in (4,685 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
2005–2010van (5 doors)183.1 in (4,650 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1999–2005van (5 doors)184.6 in (4,690 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1991–2001van (4 doors)169.9 in (4,315 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Serena wrap cost factors

A Serena wrap cost depends on the body size, the film type, and how much disassembly the installer does. The newest Serena is 184.6 in (4,690 mm) long and 73.4 in (1,865 mm) tall, so it takes more material and labor than a smaller car. Cast film costs more than calendared film, and a color change costs more than a single panel. The final price also changes if the sliding door tracks, badges, or mirrors need extra time.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (73.4 in (1,865 mm)): the roof is wrapped from a platform.

Serena wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Serena, fifth generation, factory photo
Factory color shown

2016–now Serena van (fifth generation)

2016–nowvan (5 doors)184.6 in (4,690 mm)

The fifth generation Serena has sliding side doors where the tracks stay bare and decide where the vinyl is cut. The film is trimmed along the edge of each track so the door can slide without catching. The vertical body side is tall, so the installer works from a platform for the upper sections. This generation shares its film estimate of about 69 ft (21 m) with the fourth generation.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.4 in (1,865 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Nissan Serena, fourth generation, factory photo
Factory color shown

2010–2016 Serena van (fourth generation)

2010–2016van (5 doors)184.4 in (4,685 mm)

The fourth generation Serena is tall at 73.4 in (1,865 mm), so the roof is wrapped from a platform and takes more time. The extra height means the installer must reposition the platform several times to reach the full roof and the top of the side panels. The rest of the body is similar to the fifth generation, with the same sliding door track treatment. The total film estimate is about 69 ft (21 m).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.4 in (1,865 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Nissan Serena, third generation, factory photo
Factory color shown

2005–2010 Serena van (third generation)

2005–2010van (5 doors)183.1 in (4,650 mm)

Paint age matters on the third generation Serena, built from 2005 to 2010, because panels may be original or repainted. A test spot on each panel shows whether the film will adhere well and lift cleanly later. If a panel has failing clear coat or old body filler, the wrap may not bond and the installer will advise against covering it. This generation takes about 67 ft (20.5 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Nissan Serena, second generation, factory photo
Factory color shown

1999–2005 Serena van (second generation)

1999–2005van (5 doors)184.6 in (4,690 mm)

The second generation Serena is 184.6 in (4,690 mm) long with a five-door van body, so it takes about 69 ft (21 m) of film across many panels. The large sliding doors and tall rear hatch are each wrapped as single pieces. The number of panels is the same as the newer generations, but the boxier shape can require more relief cuts at the corners. The roof and hood are straightforward, but the B-pillars and door frames add time.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Nissan Serena, first generation, factory photo
Factory color shown

1991–2001 Serena van (first generation)

1991–2001van (4 doors)169.9 in (4,315 mm)

The first generation Serena covers the 1991 to 2001 body, but its years overlap with the second generation from 1999 to 2001. An owner with a car from 1999, 2000, or 2001 must check the body code on the VIN plate to know which wrap guide applies. This body is the shortest at 169.9 in (4,315 mm) and has four doors, not five. It takes about 64 ft (19.5 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Serena

Serena chrome delete is a smaller job than a full wrap and covers the window trim and badges with black film. A partial wrap on a Serena can be the roof, hood, or mirror caps, and it uses a fraction of the full wrap film. Paint protection film (PPF) is another option, placing clear film on the front end to guard against stone chips. These partial jobs let an owner change one part of the car without committing to a full roll.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan Serena: body, cut-outs and film

A Nissan Serena vinyl wrap is shaped by the tall, five-door minivan body that has defined the model since 1991. The newest bodies measure 184.6 in (4,690 mm) long and 73.4 in (1,865 mm) tall, so a wrap uses a lot of vertical film. The third generation is slightly more compact at 183.1 in (4,650 mm) long and 72.4 in (1,840 mm) tall. The first generation is the shortest at 169.9 in (4,315 mm) and has four doors instead of five.

Serena wrap ideas start with the sliding side doors, because their tracks stay bare and the film is cut along them. The tall body means the roof is wrapped from a platform on every generation. The door handles, mirrors, badges and trim are removed or cut around for a clean finish. For a color change, the door jambs are often left in the original paint unless the owner asks for a full inside wrap.

How much vinyl to wrap a Serena depends on the generation and the film pattern. The newest and fourth-generation bodies need about 69 ft (21 m) of 60-inch cast film. The third generation takes about 67 ft (20.5 m), and the first generation takes about 64 ft (19.5 m). If you choose a chrome or patterned film, add about 10 ft (3 m) to most generations because the pattern must align across panels.

Questions about wrapping a Nissan Serena

How much vinyl does it take to wrap a Nissan Serena?

It takes about 69 ft (21 m) of 60-inch (1.52 m) cast film to wrap the newest Nissan Serena. That figure covers the main body panels of the fifth generation C27 body. A chrome or patterned film needs about 79 ft (24 m) because the pattern must line up.

Are the sliding doors of a Serena wrapped?

Yes, the sliding doors of a Serena are wrapped, but the tracks stay bare and the film is cut along them. The door panels are large, so each side is wrapped in one piece. The film must be trimmed precisely around the track so the door slides without rubbing.

Can I wrap only the hood or the roof of a Serena?

Yes, you can wrap only the hood or the roof of a Serena instead of the whole car. The roof is often done as a partial wrap, and on a tall Serena the installer uses a platform to reach it. The hood, roof, and mirror caps are the typical partial wrap areas. This uses much less film than a full wrap.

Is a Serena hard to wrap?

A Serena is hard to wrap because of its tall body and sliding side doors. The roof is wrapped from a platform, and the door tracks stay bare with the film cut along them. The body is up to 73.4 in (1,865 mm) tall on the newest generation. Those features add time and care compared to a lower car.