Wraps by car

Nissan GT-R50 by Italdesign wrap

This page covers the Nissan GT-R50 by Italdesign vinyl wrap, from material amounts to the details that shape the job. The catalog lists one generation of this limited-production sports car, running from 2021 to now. A full wrap of the newest coupe body uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 61 ft (18.5 m).

1generations16 mof film for a full wrap

Nissan GT-R50 by Italdesign, first generation, factory photo
Nissan GT-R50 by Italdesign, first generation. Factory color shown.

Nissan GT-R50 by Italdesign wrap colors and ideas

  • GT-R50 by Italdesign black wrap
  • GT-R50 by Italdesign white wrap
  • GT-R50 by Italdesign gray wrap
  • GT-R50 by Italdesign silver wrap
  • GT-R50 by Italdesign red wrap
  • GT-R50 by Italdesign blue wrap
  • GT-R50 by Italdesign green wrap
  • GT-R50 by Italdesign yellow wrap
  • GT-R50 by Italdesign orange wrap
  • GT-R50 by Italdesign purple wrap
  • GT-R50 by Italdesign pink wrap
  • GT-R50 by Italdesign teal wrap
  • GT-R50 by Italdesign brown wrap
  • GT-R50 by Italdesign gold wrap
  • GT-R50 by Italdesign chrome wrap
  • GT-R50 by Italdesign color shift wrap
  • GT-R50 by Italdesign carbon fiber wrap
  • GT-R50 by Italdesign camo and patterned wrap

How much vinyl to wrap a Nissan GT-R50 by Italdesign

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowcoupe (2 doors)188.3 in (4,784 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

GT-R50 by Italdesign wrap cost factors

The GT-R50 by Italdesign wrap cost depends mainly on the film type and the coverage area. A full wrap uses about 52 ft (16 m) of cast film, or about 61 ft (18.5 m) for chrome or patterned film. The installer's labor is also a factor, especially because the doors are large single-piece panels that take time to lay down smoothly. Since only one generation exists, there is no price difference between older and newer bodies.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

GT-R50 by Italdesign wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan GT-R50 by Italdesign, first generation, factory photo
Factory color shown

2021–now GT-R50 by Italdesign coupe (first generation)

2021–nowcoupe (2 doors)188.3 in (4,784 mm)

The first generation of the Nissan GT-R50 by Italdesign is a coupe with a length of 188.3 in (4,784 mm). This size means a full wrap needs about 52 ft (16 m) of 60-inch (1.52 m) cast film, or 61 ft (18.5 m) with chrome or patterned film. The body has around 15 to 18 major panels, including two long doors that are each wrapped with one piece. The smooth roofline and relatively flat sides help reduce the number of seams.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a GT-R50 by Italdesign

For a GT-R50 by Italdesign partial wrap, you can cover just the roof, hood, or mirror caps. A chrome delete on this car typically means wrapping the window trim and badges with black film, which is a smaller job than a full color change. Paint protection film (PPF) can be applied to the front end only, protecting the bumper, hood, and fenders from stone chips. These partial jobs use less film and take fewer hours than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan GT-R50 by Italdesign: body, cut-outs and film

The Nissan GT-R50 by Italdesign vinyl wrap follows the coupe's size and shape, which measure 188.3 in (4,784 mm) in length. This two-door body has long, relatively flat side panels that allow the film to be applied in fewer, larger pieces. The roof flows into the rear window area in one continuous curve, so film there needs careful stretching. Overall, the body's smooth lines mean less cutting and fewer visible seams than on a car with many creases.

GT-R50 by Italdesign wrap ideas usually start with the two long side doors, each covered in one large piece of film. The door handles, mirror caps, and badges are removed or cut around, depending on the finish you want. The front bumper and rear diffuser have sharp angles that may require inlays or relief cuts. Since this is a limited-production car, any trim removal should be done with extra care to avoid breaking clips.

When you count how much vinyl to wrap a GT-R50 by Italdesign, the single generation makes the estimate straightforward. The body has not changed in size since 2021, so the same film amounts apply to every one of these cars. Only the choice of film type changes the figures, with chrome or patterned film needing about 9 ft (2.5 m) more than standard cast film.

Questions about wrapping a Nissan GT-R50 by Italdesign

How much vinyl does it take to wrap a Nissan GT-R50 by Italdesign?

A full wrap of a Nissan GT-R50 by Italdesign takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount goes up to about 61 ft (18.5 m). These figures are for the coupe body, the only style made for this car.

Can I wrap only the hood or the roof of a GT-R50 by Italdesign?

Yes, you can wrap only the hood or the roof of a GT-R50 by Italdesign. The hood is a single piece that is easy to cover in one sheet, and the roof can be done for a two-tone look. Mirror caps are also a small standalone job that adds a subtle accent.

Is a GT-R50 by Italdesign hard to wrap?

The GT-R50 by Italdesign is not especially hard to wrap, but the two long doors are each one large piece of film that demands a steady hand and two installers. The front and rear bumpers have sharp angles that may require relief cuts or inlays. The car's size means a full wrap takes more material than on a smaller coupe. With patience and the right tools, an experienced installer can achieve a clean result.

How many generations of the GT-R50 by Italdesign does this page cover?

This page covers one generation of the Nissan GT-R50 by Italdesign, from 2021 to now. The car has not been redesigned, so all examples share the same body dimensions and film requirements.