Wraps by car

Nissan Elgrand wrap

A Nissan Elgrand wrap uses vinyl to change the color or finish of this full-size minivan. The catalog covers the three generations built from 1997 to now, with the newest body listed as the third generation. A full wrap of that newest body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film.

3generations22.5 mof film for a full wrap

Nissan Elgrand, third generation, factory photo
Nissan Elgrand, third generation. Factory color shown.

Nissan Elgrand wrap colors and ideas

  • Elgrand black wrap
  • Elgrand white wrap
  • Elgrand gray wrap
  • Elgrand silver wrap
  • Elgrand red wrap
  • Elgrand blue wrap
  • Elgrand green wrap
  • Elgrand yellow wrap
  • Elgrand orange wrap
  • Elgrand purple wrap
  • Elgrand pink wrap
  • Elgrand teal wrap
  • Elgrand brown wrap
  • Elgrand gold wrap
  • Elgrand chrome wrap
  • Elgrand color shift wrap
  • Elgrand carbon fiber wrap
  • Elgrand camo and patterned wrap

How much vinyl to wrap a Nissan Elgrand

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–nowvan (5 doors)193.5 in (4,915 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)
2002–2010van (5 doors)188.8 in (4,795 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1997–2002van (5 doors)186.6 in (4,740 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Elgrand wrap cost factors

Elgrand wrap cost is driven by the amount of film and the labor hours that this minivan requires. Longer bodies need more material, from about 66 ft (20 m) on the first generation to 74 ft (22.5 m) on the third. The sliding doors and tall roof add labor for cutting and platform work.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.5 in (1,815 mm)): the roof is wrapped from a platform.

Elgrand wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Elgrand, third generation, factory photo
Factory color shown

2010–now Elgrand van (third generation)

2010–nowvan (5 doors)193.5 in (4,915 mm)

The third generation Nissan Elgrand (2010–now, E52) is a five-door van with sliding side doors. The door tracks stay bare and decide where the film is cut along the body. At 193.5 in (4,915 mm) long, it needs about 74 ft (22.5 m) of film for a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.5 in (1,815 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Nissan Elgrand, second generation, factory photo
Factory color shown

2002–2010 Elgrand van (second generation)

2002–2010van (5 doors)188.8 in (4,795 mm)

The second generation Nissan Elgrand (2002–2010, E51) is a tall five-door van. Its body height of 75.6 in (1,920 mm) means the roof is wrapped from a platform and takes more time. It measures 188.8 in (4,795 mm) long, so a full wrap uses about 70 ft (21.5 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (75.6 in (1,920 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Nissan Elgrand, first generation, factory photo
Factory color shown

1997–2002 Elgrand van (first generation)

1997–2002van (5 doors)186.6 in (4,740 mm)

The first generation Nissan Elgrand (1997–2002, E50) is a five-door van now over twenty years old. On a car of these years, paint age matters, as panels may be original or repainted, and a test spot comes before a full wrap. A complete job takes about 66 ft (20 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Elgrand

An Elgrand chrome delete covers the bright trim on the window surrounds and badges with black film. A partial wrap can cover the roof, hood, or mirror caps without doing the whole van. Paint protection film (PPF) is clear film applied to the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan Elgrand: body, cut-outs and film

Nissan Elgrand vinyl wrap work is shaped by the size of these five-door vans. The third generation measures 193.5 in (4,915 mm) long, so it needs about 74 ft (22.5 m) of film. The tall body means the roof is wrapped from a platform, which changes the job on every version.

Elgrand wrap ideas must account for the sliding side doors on all generations. The door tracks stay bare, so the film is cut along them rather than covering the rails. The tall body of 71.5 in (1,815 mm) on the third generation makes the roof a raised work area.

The film needs change across the generations, so how much vinyl to wrap an Elgrand depends on the body length. The first generation (1997–2002) takes about 66 ft (20 m), the second (2002–2010) about 70 ft (21.5 m), and the third (2010–now) about 74 ft (22.5 m). Chrome or patterned film adds about 10 ft (3 m) on every version.

Questions about wrapping a Nissan Elgrand

How much vinyl does it take to wrap a Nissan Elgrand?

Yes, a full wrap of a Nissan Elgrand takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film for the newest third generation body. The first generation needs about 66 ft (20 m) and the second about 70 ft (21.5 m).

Are the sliding doors of an Elgrand wrapped?

Yes, the sliding doors are wrapped, but the door tracks stay bare. The film is cut along the tracks so they keep working smoothly.

Can I wrap only the hood or the roof of an Elgrand?

Yes, you can wrap only the hood or the roof of an Elgrand. A partial wrap often covers the roof, hood, or mirror caps, and chrome delete covers window trim and badges.

Is an Elgrand hard to wrap?

An Elgrand is not hard to wrap, but it adds work because of its size. The sliding door tracks must stay bare and the film is cut along them. The tall body means the roof is wrapped from a platform on the third generation.