Wraps by car

Nissan NV100 Clipper wrap

The Nissan NV100 Clipper wrap page covers all three generations of this minivan and the film a full wrap of the newest body takes. The third generation has been in production since 2015, while the second ran from 2013 to 2015 and the first from 2003 to 2014. A complete color change on the current NV100 Clipper needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl wrap. If the film has chrome or a pattern, the amount rises to about 57 ft (17.5 m).

3generations15.5 mof film for a full wrap

Nissan NV100 Clipper, third generation, factory photo
Nissan NV100 Clipper, third generation. Factory color shown.

Nissan NV100 Clipper wrap colors and ideas

  • NV100 Clipper black wrap
  • NV100 Clipper white wrap
  • NV100 Clipper gray wrap
  • NV100 Clipper silver wrap
  • NV100 Clipper red wrap
  • NV100 Clipper blue wrap
  • NV100 Clipper green wrap
  • NV100 Clipper yellow wrap
  • NV100 Clipper orange wrap
  • NV100 Clipper purple wrap
  • NV100 Clipper pink wrap
  • NV100 Clipper teal wrap
  • NV100 Clipper brown wrap
  • NV100 Clipper gold wrap
  • NV100 Clipper chrome wrap
  • NV100 Clipper color shift wrap
  • NV100 Clipper carbon fiber wrap
  • NV100 Clipper camo and patterned wrap

How much vinyl to wrap a Nissan NV100 Clipper

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowvan (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2013–2015van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2003–2014van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

NV100 Clipper wrap cost factors

NV100 Clipper wrap cost depends on the size of the van, the film chosen, and the labor for the tall body. A full wrap uses about 51 ft (15.5 m) of cast film, and the roof work from a platform adds time. The condition of the paint, especially on the first generation from 2003 to 2014, can require extra preparation. Partial wraps or chrome delete on the window trim and badges are smaller jobs with lower film use.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (74.6 in (1,895 mm)): the roof is wrapped from a platform.

NV100 Clipper wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan NV100 Clipper, third generation, factory photo
Factory color shown

2015–now NV100 Clipper van (third generation)

2015–nowvan (5 doors)133.7 in (3,395 mm)

The third generation Nissan NV100 Clipper (2015–now) has sliding side doors whose tracks stay bare and decide where the film is cut. The roof height of 74.6 in (1,895 mm) means the installer works from a platform. This generation is the current one and is the reference for the film estimate of about 51 ft (15.5 m).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (74.6 in (1,895 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Nissan NV100 Clipper, second generation, factory photo
Factory color shown

2013–2015 NV100 Clipper van (second generation)

2013–2015van (5 doors)133.7 in (3,395 mm)

The second generation Nissan NV100 Clipper (2013–2015) has a slightly lower roof at 73.8 in (1,875 mm), but the roof is still wrapped from a platform. The extra time on the roof is a factor in labor for any full wrap on this generation. The sliding door tracks are also left bare on this van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.8 in (1,875 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Nissan NV100 Clipper, first generation, factory photo
Factory color shown

2003–2014 NV100 Clipper van (first generation)

2003–2014van (5 doors)133.7 in (3,395 mm)

The first generation Nissan NV100 Clipper (2003–2014) is the oldest, so paint age matters for a vinyl wrap. Panels may be original or repainted after restyles in 2006 and 2012, and a test spot comes before a full wrap to check adhesion. The body height of 74.4 in (1,890 mm) includes the roof wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an NV100 Clipper

A partial wrap on the Nissan NV100 Clipper can cover the roof, hood, or mirror caps. An NV100 Clipper chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end is a clear option for rock chips without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan NV100 Clipper: body, cut-outs and film

A Nissan NV100 Clipper vinyl wrap covers a boxy five-door van that is 133.7 in (3,395 mm) long and about 74 in (1,880 mm) tall. The tall body means the roof is wrapped from a platform, which adds time to the job. The van's simple flat panels are straightforward to wrap, but the sliding side doors require precise cutting around the tracks. The compact length still uses a similar film area to larger vans because of the height.

NV100 Clipper wrap ideas commonly make use of the large side panels as a blank canvas for graphics or a full color change. The sliding door tracks stay bare, so the film is cut along them and the design must work around those lines. The roof is high and often not seen, but wrapping it in a contrasting color can change the look from above. Removing door handles, mirrors, and lights gives cleaner edges and fewer visible seams.

How much vinyl to wrap an NV100 Clipper depends on the generation, but all three share the same 133.7 in (3,395 mm) length and similar height. The first generation is slightly taller at 74.4 in (1,890 mm) than the second at 73.8 in (1,875 mm), while the third is 74.6 in (1,895 mm). Because the differences are small, the film estimate stays at about 51 ft (15.5 m) for a standard cast film. Chrome or patterned film requires about 57 ft (17.5 m) due to extra material for matching.

Questions about wrapping a Nissan NV100 Clipper

How much vinyl does it take to wrap a Nissan NV100 Clipper?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Nissan NV100 Clipper. If the film has chrome or a pattern, the amount rises to about 57 ft (17.5 m). This figure is for the newest body, the third generation from 2015 onward.

Are the sliding doors of an NV100 Clipper wrapped?

Yes, the sliding doors of an NV100 Clipper are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still slide freely. This creates a clean edge and is a standard part of the wrap process.

Can I wrap only the hood or the roof of an NV100 Clipper?

Yes, you can wrap only the hood or the roof of an NV100 Clipper. A partial wrap can include the roof, hood, or mirror caps. The roof is tall and wrapped from a platform, so it is a separate job from the hood.

Is an NV100 Clipper hard to wrap?

An NV100 Clipper is not the hardest van to wrap, but its tall body adds work. The roof is about 74 in (1,880 mm) high and must be wrapped from a platform. The sliding door tracks also require careful cutting to leave them bare.