Wraps by car

Nissan Terrano wrap

The Nissan Terrano wrap page covers all three generations of this SUV, from the first built in 1986 to the current model. A full wrap of the newest Terrano body takes about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl wrap. If you choose chrome or patterned film, plan for about 66 ft (20 m). The page gives body details, cut-out notes, and cost factors for each generation.

3generations18 mof film for a full wrap

Nissan Terrano, third generation, factory photo
Nissan Terrano, third generation. Factory color shown.

Nissan Terrano wrap colors and ideas

  • Terrano black wrap
  • Terrano white wrap
  • Terrano gray wrap
  • Terrano silver wrap
  • Terrano red wrap
  • Terrano blue wrap
  • Terrano green wrap
  • Terrano yellow wrap
  • Terrano orange wrap
  • Terrano purple wrap
  • Terrano pink wrap
  • Terrano teal wrap
  • Terrano brown wrap
  • Terrano gold wrap
  • Terrano chrome wrap
  • Terrano color shift wrap
  • Terrano carbon fiber wrap
  • Terrano camo and patterned wrap

How much vinyl to wrap a Nissan Terrano

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowSUV (5 doors)169.9 in (4,315 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1995–2006SUV (3 or 5 doors)161.6 in (4,105 mm) to 183.7 in (4,665 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
1986–1996SUV (3 or 5 doors)171.9 in (4,365 mm) to 179.9 in (4,570 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Terrano wrap cost factors

Terrano wrap cost depends on the amount of film, the number of cut-outs, and the condition of the paint. The current body needs about 59 ft (18 m) of cast film, and every trim has roof rails that must be removed or cut around. Sensors, cameras, and fog lamps on some trims add labor to the wrap. Older generations may need more preparation if the paint is aged or repainted.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Terrano wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Terrano, third generation, factory photo
Factory color shown

2014–now Terrano SUV (third generation)

2014–nowSUV (5 doors)169.9 in (4,315 mm)

The third-generation Nissan Terrano roof rails need attention before the roof is wrapped. The rails come off the roof, which gives a clean surface for the film. If you prefer not to remove them, the installer cuts the film along the rails. Leaving the rails on can lead to lifting edges where the film meets the rail.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Nissan Terrano, second generation, factory photo
Factory color shown

1995–2006 Terrano SUV (second generation)

1995–2006SUV (3 or 5 doors)161.6 in (4,105 mm) to 183.7 in (4,665 mm)

The 1999 restyling of the second-generation Terrano changed the bumpers and lights, so film cut for one version does not fit the other. The overall body length stays between 161.6 in (4,105 mm) and 183.7 in (4,665 mm), but the new bumper shapes alter the pattern. When wrapping this generation, confirm whether the car is pre- or post-restyle. You may need extra material for the larger bumpers on the restyled version.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

A tall body (72.8 in (1,850 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Nissan Terrano, first generation, factory photo
Factory color shown

1986–1996 Terrano SUV (first generation)

1986–1996SUV (3 or 5 doors)171.9 in (4,365 mm) to 179.9 in (4,570 mm)

Paint age matters on a first-generation Nissan Terrano, because these cars are from 1986 to 1996 and panels may be original or repainted. A test spot is applied to check adhesion before a full wrap. Old or repainted paint can fail under the film, so the surface is cleaned and decontaminated. The installer will tell you if any panel needs repair before wrapping.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Terrano

A partial Terrano wrap can cover the roof, hood, or mirror caps, and it uses less material than a full wrap. Terrano chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) on the front end shields the hood, fenders, and bumper from stone chips. These smaller jobs are good for owners who want a change without wrapping the whole SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan Terrano: body, cut-outs and film

A Nissan Terrano vinyl wrap follows the SUV's tall, boxy shape, which means large flat panels but also high roof sections. The current Terrano is 169.9 in (4,315 mm) long, so it uses a standard amount of film for its class. The three-door and five-door styles of older generations change how much material the sides need. Knowing the body length and door count helps you estimate a partial or full wrap.

Terrano wrap ideas start with handling the tailgate, because on every generation the rear glass is set into the tailgate and the film must end at the glass edge. Roof rails on the current model come off before the roof is wrapped, or the film is cut along them. Some trims have parking sensors, cameras, or fog lamps that require cut-outs in the film. Removing badges and trim before wrapping gives cleaner edges and fewer relief cuts.

How much vinyl to wrap a Terrano depends on the generation, because the bodies are not the same size. The newest Terrano (2014–now) needs about 59 ft (18 m) of cast film, while the first generation (1986–1996) uses a similar 59 ft (18 m) but a little more chrome or patterned film at 67 ft (20.5 m). The second generation (1995–2006) is the largest at up to 183.7 in (4,665 mm) long, so it takes about 61 ft (18.5 m) of cast film or 76 ft (23 m) of chrome or patterned film. Keep the generation code (D10, R50, WD21) in mind when ordering film.

Questions about wrapping a Nissan Terrano

How much vinyl does it take to wrap a Nissan Terrano?

You need about 59 ft (18 m) of 60-inch (1.52 m) vinyl wrap to cover a current Nissan Terrano. That figure is for a full wrap of the newest body (2014–now). Chrome or patterned film takes more, about 66 ft (20 m), because of the need to match patterns.

Can I wrap only the hood or the roof of a Terrano?

Yes, you can wrap only the hood or the roof of a Terrano. A partial wrap often includes the roof, hood, or mirror caps. These panels are flat and easy to cover with vinyl. A hood or roof wrap is a good way to add contrast without a full wrap.

Is a Terrano hard to wrap?

A Terrano is not especially hard to wrap, but the tall body and some details add work. The roof sits high, so the installer may use a platform to reach it. Every generation has a tailgate with rear glass that requires the film to end at the glass edge. Some trims have sensors, cameras, or fog lamps that need cut-outs. Roof rails on the current model also need to be removed or worked around.

How many generations of the Terrano does this page cover?

This page covers three generations of the Nissan Terrano: the first from 1986 to 1996, the second from 1995 to 2006, and the third from 2014 to now. Each body is different in size and details that affect a wrap.