Wraps by car

Nissan Juke wrap

The Nissan Juke wrap page covers the first and second generations of this SUV and the vinyl wrap film they need. A full wrap of the 2019–now body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body calls for about 64 ft (19.5 m).

2generations17.5 mof film for a full wrap

Nissan Juke, second generation, factory photo
Nissan Juke, second generation. Factory color shown.

Nissan Juke wrap colors and ideas

  • Juke black wrap
  • Juke white wrap
  • Juke gray wrap
  • Juke silver wrap
  • Juke red wrap
  • Juke blue wrap
  • Juke green wrap
  • Juke yellow wrap
  • Juke orange wrap
  • Juke purple wrap
  • Juke pink wrap
  • Juke teal wrap
  • Juke brown wrap
  • Juke gold wrap
  • Juke chrome wrap
  • Juke color shift wrap
  • Juke carbon fiber wrap
  • Juke camo and patterned wrap

How much vinyl to wrap a Nissan Juke

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)165.7 in (4,210 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
2010–2020SUV (5 doors)162.8 in (4,135 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Juke wrap cost factors

The Juke wrap cost depends on the size of the car, the film chosen, and the work the body needs. The second generation takes about 57 ft (17.5 m) of standard cast film, while the first takes about 54 ft (16.5 m). Chrome or patterned film pushes the need to about 64 ft (19.5 m) on either body. Parts like parking sensors, cameras, and fog lamps add cut-out time.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Some trims have a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Juke wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Juke, second generation, factory photo
Factory color shown

2019–now Juke SUV (second generation)

2019–nowSUV (5 doors)165.7 in (4,210 mm)

The second-generation Nissan Juke was restyled in 2024, and the bumpers and lights changed. Film cut for the pre-2024 version does not fit the restyled version. A wrap ordered for this body should be based on the exact production year and front-end shape. The length stays at 165.7 in (4,210 mm) for the whole generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Some trims have a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Nissan Juke, first generation, factory photo
Factory color shown

2010–2020 Juke SUV (first generation)

2010–2020SUV (5 doors)162.8 in (4,135 mm)

Paint age matters when you wrap a first-generation Nissan Juke from 2010–2020. Panels on a car of these years may be original or repainted, so a test spot comes before a full wrap. The installer checks adhesion on each panel before cutting film. The body is 162.8 in (4,135 mm) long and takes about 54 ft (16.5 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Juke

Partial wrap on a Nissan Juke includes the roof, hood, mirror caps, and rear spoiler. A Juke chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These jobs use less film than a full wrap and are done on either generation.

  • Partial wrap: roof, hood, mirror caps, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan Juke: body, cut-outs and film

The Nissan Juke vinyl wrap is shaped by the body style and size of the car. Both generations are five-door SUVs, with the second generation at 165.7 in (4,210 mm) long and the first at 162.8 in (4,135 mm). The newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the older one takes about 54 ft (16.5 m). The tailgate with its rear glass sets where the film ends on the back of the car.

Juke wrap ideas need to account for the parts that get cut-outs or come off the body. Every trim has parking sensors in the bumpers and cameras in the body, so the film is cut around each sensor and lens. Some trims have fog lamps in the front bumper, which means cut-outs in the bumper film. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

How much vinyl to wrap a Juke depends on the generation you have. The first generation, produced 2010–2020, takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The second generation, produced 2019 and later, takes about 57 ft (17.5 m) of the same film. A restyling in 2014 changed the first generation, but the film amount stays the same.

Questions about wrapping a Nissan Juke

How much vinyl does it take to wrap a Nissan Juke?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Nissan Juke of the current body. This is the estimate for a full wrap of the second generation produced from 2019. For chrome or patterned film, the amount goes up to about 64 ft (19.5 m). The first generation takes about 54 ft (16.5 m).

Which years of the Juke take the same film cuts?

The second generation of the Juke, produced from 2019, takes one set of film cuts, but the 2024 restyling changed the bumpers and lights. Film cut for the 2019–2023 version does not fit the 2024 and later version. The first generation, produced 2010–2020, was restyled in 2014, so film cuts differ between the early and late versions.

Can I wrap only the hood or the roof of a Juke?

Yes, you can wrap only the hood or the roof of a Juke. A partial wrap on this car covers the roof, hood, mirror caps, and rear spoiler. These pieces can be done individually or together. The first and second generations both accept partial wraps.

Is a Juke hard to wrap?

A Juke is not the hardest car to wrap, but it has parts that add work. Every trim has parking sensors in the bumpers and cameras in the body, so the film must be cut around each sensor and lens. Some trims have fog lamps, which need cut-outs in the bumper film. The tailgate with the rear glass in it means the film ends at the edge of the glass.