Wraps by car

Nissan Leaf wrap

This page covers the Nissan Leaf wrap for all three generations of the electric hatchback. The newest body, the third generation from 2025 onward, needs about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl wrap for a full color change. The first and second generations are also detailed with their own measurements and wrap notes.

3generations17 mof film for a full wrap

Nissan Leaf, third generation, factory photo
Nissan Leaf, third generation. Factory color shown.

Nissan Leaf wrap colors and ideas

  • Leaf black wrap
  • Leaf white wrap
  • Leaf gray wrap
  • Leaf silver wrap
  • Leaf red wrap
  • Leaf blue wrap
  • Leaf green wrap
  • Leaf yellow wrap
  • Leaf orange wrap
  • Leaf purple wrap
  • Leaf pink wrap
  • Leaf teal wrap
  • Leaf brown wrap
  • Leaf gold wrap
  • Leaf chrome wrap
  • Leaf color shift wrap
  • Leaf carbon fiber wrap
  • Leaf camo and patterned wrap

How much vinyl to wrap a Nissan Leaf

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowhatchback (5 doors)173.4 in (4,404 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2017–nowhatchback (5 doors)176.8 in (4,490 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
2009–2017hatchback (5 doors)175.0 in (4,445 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Leaf wrap cost factors

Leaf wrap cost is set by the film amount and the work the car demands. The full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film on the newest body, but chrome or patterned film uses about 66 ft (20 m). More cut-outs for sensors or cameras add time, especially on the second generation where every trim has parking sensors and cameras. The installer also removes and replaces mirrors, door handles, and trim pieces, which adds labor to the job.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Leaf wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Leaf, third generation, factory photo
Factory color shown

2025–now Leaf hatchback (third generation)

2025–nowhatchback (5 doors)173.4 in (4,404 mm)

The third-generation Nissan Leaf is a five-door hatchback with a length of 173.4 in (4,404 mm). Its size means a full wrap needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) of chrome or patterned film. The tailgate with the rear glass in it means the film ends at the edge of the glass, so no film is applied over the glass. The charge port door is wrapped as a small piece of its own because this is an electric car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Nissan Leaf, second generation, factory photo
Factory color shown

2017–now Leaf hatchback (second generation)

2017–nowhatchback (5 doors)176.8 in (4,490 mm)

The second-generation Nissan Leaf spans 2017 to the present, but the 2025 and later third generation overlaps those years. A car from 2025 or later could be either the second or third body, so the owner checks the length: 176.8 in (4,490 mm) for the second generation. The second generation was restyled in 2022, but the body shape remains the same. This generation is coded ZE1.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Nissan Leaf, first generation, factory photo
Factory color shown

2009–2017 Leaf hatchback (first generation)

2009–2017hatchback (5 doors)175.0 in (4,445 mm)

The first-generation Nissan Leaf was produced from 2009 to 2017 and is now an older car. On a car of these years, panels may be original or repainted, so a test spot of film is wise before a full wrap. The paint condition affects how well the film adheres and how it looks when removed later. The first generation is coded ZE0 and has a length of 175.0 in (4,445 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Leaf

A partial wrap on the Nissan Leaf can be the roof, the hood, or the mirror caps. Leaf chrome delete can cover the window trim and the badges with black film. Paint protection film (PPF) is clear film applied to the front end to protect the paint. These smaller jobs use less material than a full wrap and can be combined.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan Leaf: body, cut-outs and film

The Nissan Leaf vinyl wrap is fitted to a compact five-door hatchback in every generation. Its length ranges from 173.4 in (4,404 mm) on the current body to 176.8 in (4,490 mm) on the second generation, so the film amount changes little between them. The five-door layout means four door skins, front and rear bumpers, a hood, a tailgate, and both roof pillars are wrapped. The tailgate includes the rear glass, so the film ends at the edge of the glass on all years.

Leaf wrap ideas include a full color change, a partial wrap on the roof or hood, and chrome delete on the window trim and badges. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips. Every Leaf has a tailgate with the rear glass in it, so the film stops at the glass edge. The charge port door is wrapped as a small separate piece on all electric Leaf models.

If you want to know how much vinyl to wrap a Leaf, the answer depends on the generation. The second generation uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the first and third use about 56 ft (17 m). Chrome or patterned film adds roughly 10 ft (3 m) to each estimate because of extra material for matching. The body length grows slightly from 175.0 in (4,445 mm) on the first generation to 176.8 in (4,490 mm) on the second, then drops to 173.4 in (4,404 mm) on the third.

Questions about wrapping a Nissan Leaf

How much vinyl does it take to wrap a Nissan Leaf?

How much vinyl does it take to wrap a Nissan Leaf? For the newest body, a full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 10 ft (3 m) more, or about 66 ft (20 m). The second generation uses about 57 ft (17.5 m) of standard film. The first generation uses the same amount as the third.

Can I wrap only the hood or the roof of a Leaf?

Can I wrap only the hood or the roof of a Leaf? Yes, a partial wrap on the roof, the hood, or the mirror caps is a common choice. You can also do a chrome delete on the window trim and badges. Paint protection film can be applied just to the front end. These smaller jobs cover only the panels you want to change or protect.

Is a Leaf hard to wrap?

Is a Leaf hard to wrap? The Nissan Leaf has some features that add work, mainly the tailgate with rear glass in it. The film must be trimmed exactly at the edge of the glass on every generation. The second generation also has parking sensors and cameras in the bumpers and body, so the film is cut around each sensor and each lens. The charge port door is wrapped as a separate small piece on all Leaf models.

How many generations of the Leaf does this page cover?

How many generations of the Leaf does this page cover? This page covers three generations of the Nissan Leaf. The first generation ran from 2009 to 2017, the second from 2017 onward, and the third from 2025 onward. Each generation has its own length, film estimate, and wrap notes. The second and third generations overlap in 2025, so owners of that year must check which body they have.