Wraps by car

Nissan Livina wrap

A Nissan Livina wrap covers the full body of this five-door minivan with vinyl wrap. The catalog lists two generations, and the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 70 ft (21.5 m).

2generations18.5 mof film for a full wrap

Nissan Livina, second generation, factory photo
Nissan Livina, second generation. Factory color shown.

Nissan Livina wrap colors and ideas

  • Livina black wrap
  • Livina white wrap
  • Livina gray wrap
  • Livina silver wrap
  • Livina red wrap
  • Livina blue wrap
  • Livina green wrap
  • Livina yellow wrap
  • Livina orange wrap
  • Livina purple wrap
  • Livina pink wrap
  • Livina teal wrap
  • Livina brown wrap
  • Livina gold wrap
  • Livina chrome wrap
  • Livina color shift wrap
  • Livina carbon fiber wrap
  • Livina camo and patterned wrap

How much vinyl to wrap a Nissan Livina

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–nowvan (5 doors)164.6 in (4,180 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2006–2013van (5 doors)164.6 in (4,180 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Livina wrap cost factors

Livina wrap cost depends on film type, surface area, and prep work on this minivan. The body length is 164.6 in (4,180 mm), and the sliding door tracks need careful cutting. A chrome or patterned film adds material: about 70 ft (21.5 m) instead of 61 ft (18.5 m).

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Livina wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Livina, second generation, factory photo
Factory color shown

2013–now Livina van (second generation)

2013–nowvan (5 doors)164.6 in (4,180 mm)

The sliding side doors of the Nissan Livina (2013–now) have tracks that stay bare. The film is cut along the tracks, and the edges are tucked so the doors still open freely. This gives the second generation a clean look even with the extra trim lines.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Nissan Livina, first generation, factory photo
Factory color shown

2006–2013 Livina van (first generation)

2006–2013van (5 doors)164.6 in (4,180 mm)

On a first-generation Nissan Livina (2006–2013), paint age matters before a full wrap. Panels may be original or repainted, and a test spot on the paint shows whether the vinyl will bond well. A car of these years often has more chips and scratches that need repair first.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Livina

For smaller jobs, a partial wrap on a Nissan Livina can cover the roof, hood, or mirror caps. A Livina chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nissan Livina: body, cut-outs and film

The Nissan Livina vinyl wrap must handle a long roof and tall sides typical of a minivan. Both generations measure 164.6 in (4,180 mm) in length, so the film is cut from large sheets. The sliding side doors add two long vertical seams where the film is trimmed.

Livina wrap ideas often have to work around the sliding door tracks, which stay bare. The tracks themselves are not covered, and the film is cut along them for clean operation. Door handles, mirrors, and badges are removed or masked so the vinyl can sit flat.

If you are counting film, how much vinyl to wrap a Livina is the same for both generations. The first generation (2006–2013) and the second generation (2013–now) share the same body length of 164.6 in (4,180 mm). A full wrap of either generation takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Nissan Livina

How much vinyl does it take to wrap a Nissan Livina?

A full wrap of a Nissan Livina takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 70 ft (21.5 m). These amounts cover the newest body, which is the same size as the first generation.

Are the sliding doors of a Livina wrapped?

Yes, the sliding doors of a Livina are wrapped, but the tracks stay bare. The film is cut along the tracks so the doors continue to slide smoothly. This detail is part of the wrap on every Livina generation.

Can I wrap only the hood or the roof of a Livina?

Yes, you can wrap only the hood or the roof of a Livina. A partial wrap may also include the mirror caps. A chrome delete covers window trim and badges, while clear paint protection film (PPF) can be applied to the front end.

Is a Livina hard to wrap?

A Livina is not the hardest car to wrap, but the sliding door tracks add work. The film must be cut along those tracks while they stay bare. With a body length of 164.6 in (4,180 mm), the installer also handles large side panels.