Wraps by car

Omoda 9 wrap

The Omoda 9 wrap page covers the first-generation Omoda 9 SUV, produced from 2025 onward. A full vinyl wrap on this body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 62 ft (19 m). This page explains what the wrap involves, from panel sizes to the parts that need cut-outs.

1generations17 mof film for a full wrap

Omoda 9, first generation, factory photo
Omoda 9, first generation. Factory color shown.

Omoda 9 wrap colors and ideas

  • Omoda 9 black wrap
  • Omoda 9 white wrap
  • Omoda 9 gray wrap
  • Omoda 9 silver wrap
  • Omoda 9 red wrap
  • Omoda 9 blue wrap
  • Omoda 9 green wrap
  • Omoda 9 yellow wrap
  • Omoda 9 orange wrap
  • Omoda 9 purple wrap
  • Omoda 9 pink wrap
  • Omoda 9 teal wrap
  • Omoda 9 brown wrap
  • Omoda 9 gold wrap
  • Omoda 9 chrome wrap
  • Omoda 9 color shift wrap
  • Omoda 9 carbon fiber wrap
  • Omoda 9 camo and patterned wrap

How much vinyl to wrap an Omoda 9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)188.0 in (4,775 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Omoda 9 wrap cost factors

The Omoda 9 wrap cost depends on the amount of film, the labor for a large SUV, and the parts that need extra work. This body is 188.0 in (4,775 mm) long and takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. The panoramic glass roof is not wrapped, but the roof rails on some trims have to be removed or cut around. Cut-outs for parking sensors and cameras on every trim add time, and the charge port door on plug-in and electric versions is wrapped separately.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Omoda 9 wraps by generation

Swipe sideways. Tap a card for the full description.

Omoda 9, first generation, factory photo
Factory color shown

2025–now Omoda 9 SUV (first generation)

2025–nowSUV (5 doors)188.0 in (4,775 mm)

The first generation Omoda 9 has a glass roof that stays dark whatever the color of the film. This panoramic glass roof is on every trim, and it is not wrapped, so the film ends at the roof rails. The roof itself remains its original glass color, which affects the overall look of the wrap. For a full color change, the contrast between the film on the pillars and the dark glass is part of the design.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Omoda 9

An Omoda 9 chrome delete covers the window trim and badges with black film, giving a more uniform look. A partial wrap can cover the hood, mirror caps, and tailgate, leaving the rest of the body original. Paint protection film (PPF) is a clear option that protects the front end from stone chips and scratches. These smaller jobs use less film than a full wrap and can be done without removing the roof rails.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Omoda 9: body, cut-outs and film

The Omoda 9 vinyl wrap has to cover a large SUV body that measures 188.0 in (4,775 mm) long. Every trim has a panoramic glass roof, which is not wrapped, so the film ends at the roof rails. Some trims have roof rails that must be removed before the roof is wrapped, or the film is cut along them. The five-door body shape means the installer works across the hood, roof, sides, and tailgate, with the tailgate glass left uncovered.

Omoda 9 wrap ideas begin with the parts that need cut-outs or come off before the film goes on. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Every trim has parking sensors in the bumpers, and the film is cut around each sensor. Every trim also has cameras in the body, and the film is cut around each lens. On plug-in and electric versions, the charge port door is wrapped as a small piece of its own.

How much vinyl to wrap an Omoda 9 depends on the generation, and this car has only one generation so far. The first generation, produced from 2025 onward, is the only body style listed in the catalog. For an owner counting film, that means the estimate stays the same for every Omoda 9 you will find. The full wrap on this body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 62 ft (19 m) with chrome or patterned film.

More Omoda wraps

Questions about wrapping an Omoda 9

How much vinyl does it take to wrap an Omoda 9?

A full wrap on an Omoda 9 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 62 ft (19 m). This figure is for the first-generation body, which is the only generation in the catalog.

Can the roof of an Omoda 9 be wrapped?

No, the roof of an Omoda 9 cannot be wrapped because every trim has a panoramic glass roof. The glass is not wrapped, and the film ends at the roof rails. If the car has roof rails, they are removed before the roof is wrapped, or the film is cut along them.

Can I wrap only the hood or the roof of an Omoda 9?

Yes, you can wrap only the hood or the roof of an Omoda 9 as part of a partial wrap. A partial wrap can cover the hood, mirror caps, and tailgate. The roof glass itself is not wrapped, but you can wrap the roof rails if your car has them, or leave them as they are.

Is an Omoda 9 hard to wrap?

The Omoda 9 is not particularly hard to wrap, but it has several parts that add work. The panoramic glass roof means the film ends at the roof rails, and on some trims the rails must be removed or cut around. Every trim has parking sensors and cameras that need cut-outs in the film. The tailgate glass is also left uncovered, so the film edge must be trimmed neatly around it. The large size of the body, 188.0 in (4,775 mm) long, means the installer works with long panels.