Wraps by car

Omoda C7 wrap

The Omoda C7 wrap guide covers the first-generation SUV built from 2024 to now. A full vinyl wrap of the Omoda C7 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) to that total. This page explains the film amounts, the parts that need cut-outs, and the smaller wrap jobs.

1generations16.5 mof film for a full wrap

Omoda C7, first generation, factory photo
Omoda C7, first generation. Factory color shown.

Omoda C7 wrap colors and ideas

  • Omoda C7 black wrap
  • Omoda C7 white wrap
  • Omoda C7 gray wrap
  • Omoda C7 silver wrap
  • Omoda C7 red wrap
  • Omoda C7 blue wrap
  • Omoda C7 green wrap
  • Omoda C7 yellow wrap
  • Omoda C7 orange wrap
  • Omoda C7 purple wrap
  • Omoda C7 pink wrap
  • Omoda C7 teal wrap
  • Omoda C7 brown wrap
  • Omoda C7 gold wrap
  • Omoda C7 chrome wrap
  • Omoda C7 color shift wrap
  • Omoda C7 carbon fiber wrap
  • Omoda C7 camo and patterned wrap

How much vinyl to wrap an Omoda C7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)181.9 in (4,621 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Omoda C7 wrap cost factors

Omoda C7 wrap cost depends on the film type, the amount of film, and the labor for the body parts. A full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) film for a solid color, while chrome or patterned film adds about 7 ft (2 m). The panoramic glass roof reduces the wrapped area, but the roof rails, sensors, and cameras all add cut-out time. The five-door SUV body has no extra body styles, so the film area stays the same across trims.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Omoda C7 wraps by generation

Swipe sideways. Tap a card for the full description.

Omoda C7, first generation, factory photo
Factory color shown

2024–now Omoda C7 SUV (first generation)

2024–nowSUV (5 doors)181.9 in (4,621 mm)

The first-generation Omoda C7 wrap leaves the glass roof unwrapped, so the roof stays dark whatever the color of the film. The roof is one large glass panel on every trim, and film is not applied over it. Installers run the vinyl up to the roof rails and stop there, which keeps the roof's original appearance. That dark roof becomes a fixed design element against the wrapped body panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Omoda C7

A partial wrap on an Omoda C7 covers the hood, mirror caps, or tailgate instead of the full body. An Omoda C7 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear layer applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done on their own or as part of a larger color change.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Omoda C7: body, cut-outs and film

An Omoda C7 vinyl wrap follows the body of a five-door SUV measuring 181.9 in (4,621 mm) long. The single body style keeps the film estimate straightforward with no long-wheelbase version to plan for. The tailgate includes the rear glass, so the film stops at the edge of the glass rather than covering it. The C7's size suits a full wrap done in one session with careful panel-by-panel layout.

Omoda C7 wrap ideas start with the parts that need cut-outs or removal before the film goes on. Every trim has a panoramic glass roof that is not wrapped, so the film ends at the roof rails. The roof rails themselves come off first or the installer cuts the film along them. Parking sensors in the bumpers and cameras in the body are cut around each sensor and lens, while the charge port door on plug-in and electric versions is wrapped as a small piece of its own.

How much vinyl to wrap an Omoda C7 depends on the generation, and only one is in the catalog. The first generation, built from 2024 to now, takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a standard color change wrap. A chrome or patterned finish brings the total to about 61 ft (18.5 m) because of extra material needed for alignment. Anyone counting film for this SUV uses these figures as the baseline for a full wrap.

More Omoda wraps

Questions about wrapping an Omoda C7

How much vinyl does it take to wrap an Omoda C7?

A full Omoda C7 wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That figure is for a solid color on the first-generation SUV built from 2024 to now. Chrome or patterned film raises the amount to about 61 ft (18.5 m).

Can the roof of an Omoda C7 be wrapped?

No, the roof of an Omoda C7 is not wrapped because every trim has a panoramic glass roof. Glass is left uncovered, and the film ends at the roof rails. The roof stays dark regardless of the wrap color chosen for the body.

Can I wrap only the hood or the roof of an Omoda C7?

Yes, you can wrap only the hood or the roof of an Omoda C7 as a partial job. A partial wrap on this SUV can cover the hood, mirror caps, or tailgate. The roof itself is glass and is not wrapped, so a hood-only wrap is a common small job. Chrome delete on the window trim and badges is another partial option.

Is an Omoda C7 hard to wrap?

An Omoda C7 is not especially hard to wrap, but it has details that add work. The panoramic glass roof means the vinyl stops at the roof rails, and the rails themselves either come off or need careful trimming. Parking sensors in the bumpers and cameras in the body require cut-outs around each one. The charge port door on plug-in and electric versions is wrapped as a separate small piece.